Re: ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040

["Justin P. Mattock" <justinmattock@xxxxxxxxx>]

On 03/07/2012 07:19 AM, Mohammed Shafi wrote:
> On Wed, Mar 7, 2012 at 7:55 PM, Justin P. Mattock
> <justinmattock@xxxxxxxxx>  wrote:
> > ath9k craps out from time to time(more annoying if anything)
> >
> > [44309.840830] ath: Failed to stop TX DMA, queues=0x001!
> > [44309.858246] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
> > AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
> > [44309.858255] ath: Could not stop RX, we could be confusing the DMA engine
> > when we start RX up
> > [44309.932801] ath: Failed to stop TX DMA, queues=0x001!
> > [44309.950352] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
> > AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
> > [44309.950361] ath: Could not stop RX, we could be confusing the DMA engine
> > when we start RX up
> > [44310.024301] ath: Failed to stop TX DMA, queues=0x001!
> > [44310.041641] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
> > AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
> > [44310.041646] ath: Could not stop RX, we could be confusing the DMA engine
> > when we start RX up
> > [44310.116316] ath: Failed to stop TX DMA, queues=0x001!
> > [44310.133909] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
> > AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
> > [44310.133918] ath: Could not stop RX, we could be confusing the DMA engine
> > when we start RX up
> > [44310.208021] ath: Failed to stop TX DMA, queues=0x001!
> > [44310.225752] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
> > AR_DIAG_SW=0x02000020 DMADBG_7=0x00008040
> > [44310.225761] ath: Could not stop RX, we could be confusing the DMA engine
> > when we start RX up
> > [44310.299922] ath: Failed to stop TX DMA, queues=0x001!
> > [44310.317579] ath: DMA failed to stop in 10 ms AR_CR=0x00000024
> > AR_DIAG_SW=0x02000020 DMADBG_7=0x00006040
> > [44310.317587] ath: Could not stop RX, we could be confusing the DMA engine
> > whe
>
> this is has become a know issue but less harmful, please try to see if
> the workaround of disabling power save helps
>
> iw dev wlanX set power_save off

ok! I have set that on the machine.. will see if I get this message in 
the upcoming weeks.

> > part of dmesg here:
> > http://fpaste.org/xew6/
> > I can supply full log if needed..
> >
> > Justin P. Mattock
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html