pull-request: can 2012-02-20

[Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>]

Hello David,

here's a single patch intendet for 3.3. Oliver Hartkopp fixed a problem in
the generic SJA1000 interrupt handler. If you unplug a PCMCIA or PCIe card,
 when the CAN bus is under high load, the interrupt handler my
loop forever, not noticing that the hardware has been removed. I added
stable to Cc, v3.2 was the first kernel with such a driver.

regards, Marc

---

The following changes since commit 64f0a836f600e9c31ffd511713ab5d328aa96ac8:

  b44: remove __exit from b44_pci_exit() (2012-02-19 18:57:51 -0500)

are available in the git repository at:
  git://gitorious.org/linux-can/linux-can.git master

Oliver Hartkopp (1):
      can: sja1000: fix isr hang when hw is unplugged under load

 drivers/net/can/sja1000/sja1000.c |   13 ++++++++++++-
 1 files changed, 12 insertions(+), 1 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html