Re: development board?
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
I'll try MikroTik RouterBOARD 450G: CPU: AR7161 680MHz Memory 256MB DDR SDRAM onboard memory Boot loader RouterBOOT Data storage 512MB onboard NAND memory chip, microSD slot on back side Ethernet Five 10/100/1000 Mbit/s Ethernet ports with Auto-MDI/X miniPCI none Extras Reset switch, Beeper Serial port One DB9 RS232C asynchronous serial port Power, NAND activity, 5 user LEDs Power options Power over Ethernet: 18-28V DC (except power over datalines). Power jack: 8-28V DC Dimensions 9 cm x 11.5 cm, 105 grams Operating System MikroTik RouterOS v3, Level5 license Actual tested throughput Ether1 <-> Ether2 = 1Gbps Ether2 <-> Ether3 = 650Mbps openvrt/debvrt support this board (no FPU) Oliver > On Thu, Aug 02, 2012 at 05:25:13PM +0300, Kaj-Michael Lang wrote: > > > On Thu, 2012-07-19 at 21:15 +0200, Oliver Kowalke wrote: > > > I'm searching for an development board with a MIPS processor - 1GB > > > RAM > > > would be nice but 10/100MBit ethernet is required. > > > > Don't know about the ethernet part, but you could check out the very > > cheap mips based android tablets. Search for Ainol Novo 7 Paladin for > > example, under 100€. > > > > Anyone tried getting plain-old-linux running on one? > > I suggest that whoever has suggestions for suitable boards should list > them including key technical data such as kernel / distribution support, > CPU type, 32/64 bit, endianess, price, peripherals, manufacturing status > and availability. > > Ralf >
[Linux MIPS Home] [LKML Archive] [Linux ARM] [Linux] [Git] [Photo] [Yosemite News] [Linux SCSI] [Linux Hams]