[PATCH V2 07/16] MIPS: Loongson 3: Add IRQ init and dispatch support.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


IRQ routing path of Loongson-3:
Devices(most) --> I8259 --> HT Controller --> IRQ Routing Table --> CPU
                                                  ^
                                                  |
Device(legacy devices such as UART) --> Bonito ---|

IRQ Routing Table route 32 INTs to CPU's INT0~INT3(IP2~IP5 of CP0), 32
INTs include 16 HT INTs(mostly), 4 PCI INTs, 1 LPC INT, etc. IP6 is used
for IPI and IP7 is used for internal MIPS timer. LOONGSON_INT_ROUTER_*
are IRQ Routing Table registers.

I8259 IRQs are 1:1 mapped to HT1 INTs. LOONGSON_HT1_* are configuration
registers of HT1 controller.

Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx>
Signed-off-by: Hua Yan <yanh@xxxxxxxxxx>
---
 arch/mips/include/asm/mach-loongson/irq.h      |   24 +++++++
 arch/mips/include/asm/mach-loongson/loongson.h |    9 +++
 arch/mips/loongson/Makefile                    |    6 ++
 arch/mips/loongson/loongson-3/Makefile         |    4 +
 arch/mips/loongson/loongson-3/irq.c            |   87 ++++++++++++++++++++++++
 5 files changed, 130 insertions(+), 0 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-loongson/irq.h
 create mode 100644 arch/mips/loongson/loongson-3/Makefile
 create mode 100644 arch/mips/loongson/loongson-3/irq.c

diff --git a/arch/mips/include/asm/mach-loongson/irq.h b/arch/mips/include/asm/mach-loongson/irq.h
new file mode 100644
index 0000000..4787cd0
--- /dev/null
+++ b/arch/mips/include/asm/mach-loongson/irq.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_MACH_LOONGSON_IRQ_H_
+#define __ASM_MACH_LOONGSON_IRQ_H_
+
+#include <boot_param.h>
+
+/* cpu core interrupt numbers */
+#define MIPS_CPU_IRQ_BASE 56
+
+#ifdef CONFIG_CPU_LOONGSON3
+
+#define LOONGSON_UART_IRQ   (MIPS_CPU_IRQ_BASE + 2) /* uart */
+#define LOONGSON_I8259_IRQ  (MIPS_CPU_IRQ_BASE + 3) /* i8259 */
+#define LOONGSON_TIMER_IRQ  (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
+
+#define LOONGSON_HT1_CFG_BASE		ht_control_base
+#define LOONGSON_HT1_INT_VECTOR_BASE	LOONGSON_HT1_CFG_BASE + 0x80
+#define LOONGSON_HT1_INT_EN_BASE	LOONGSON_HT1_CFG_BASE + 0xa0
+#define LOONGSON_HT1_INT_VECTOR(n)	LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * n)
+#define LOONGSON_HT1_INTN_EN(n)		LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * n)
+
+#endif
+
+#include_next <irq.h>
+#endif /* __ASM_MACH_LOONGSON_IRQ_H_ */
diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
index f36f348..fe7d9a6 100644
--- a/arch/mips/include/asm/mach-loongson/loongson.h
+++ b/arch/mips/include/asm/mach-loongson/loongson.h
@@ -61,6 +61,12 @@ extern int mach_i8259_irq(void);
 #define LOONGSON_REG(x) \
 	(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
 
+#define LOONGSON3_REG8(base, x) \
+	(*(volatile u8 *)((char *)TO_UNCAC(base) + (x)))
+
+#define LOONGSON3_REG32(base, x) \
+	(*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
+
 #define LOONGSON_IRQ_BASE	32
 #define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
 
@@ -86,6 +92,9 @@ static inline void do_perfcnt_IRQ(void)
 #define LOONGSON_REG_BASE 	0x1fe00000
 #define LOONGSON_REG_SIZE 	0x00100000	/* 256Bytes + 256Bytes + ??? */
 #define LOONGSON_REG_TOP	(LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+#define LOONGSON3_REG_BASE	0x3ff00000
+#define LOONGSON3_REG_SIZE 	0x00100000	/* 256Bytes + 256Bytes + ??? */
+#define LOONGSON3_REG_TOP	(LOONGSON3_REG_BASE+LOONGSON3_REG_SIZE-1)
 
 #define LOONGSON_LIO1_BASE 	0x1ff00000
 #define LOONGSON_LIO1_SIZE 	0x00100000	/* 1M */
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 2b76cb0..b1e4f05 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -15,3 +15,9 @@ obj-$(CONFIG_LEMOTE_FULOONG2E)  += fuloong-2e/
 #
 
 obj-$(CONFIG_LEMOTE_MACH2F)  += lemote-2f/
+
+#
+# All Loongson-3 family machines
+#
+
+obj-$(CONFIG_CPU_LOONGSON3)  += loongson-3/
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
new file mode 100644
index 0000000..b9968cd
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for Loongson-3 family machines
+#
+obj-y			+= irq.o
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
new file mode 100644
index 0000000..27aef31
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -0,0 +1,87 @@
+#include <loongson.h>
+#include <irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+#define LOONGSON_INT_ROUTER_OFFSET	0x1400
+#define LOONGSON_INT_ROUTER_INTEN	LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
+#define LOONGSON_INT_ROUTER_INTENSET	LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
+#define LOONGSON_INT_ROUTER_INTENCLR	LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
+#define LOONGSON_INT_ROUTER_ENTRY(n)	LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
+#define LOONGSON_INT_ROUTER_LPC		LOONGSON_INT_ROUTER_ENTRY(0x0a)
+#define LOONGSON_INT_ROUTER_HT1(n)	LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
+
+#define LOONGSON_INT_CORE0_INT0		0x11 /* route to int 0 of core 0 */
+#define LOONGSON_INT_CORE0_INT1		0x21 /* route to int 1 of core 0 */
+
+extern void loongson3_ipi_interrupt(struct pt_regs *regs);
+
+static void ht_irqdispatch(void)
+{
+	unsigned int i, irq;
+	unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
+
+	irq = LOONGSON_HT1_INT_VECTOR(0);
+	LOONGSON_HT1_INT_VECTOR(0) = irq;
+
+	for (i = 0; i < (sizeof(ht_irq) / sizeof(*ht_irq)); i++) {
+		if (irq & (0x1 << ht_irq[i]))
+			do_IRQ(ht_irq[i]);
+	}
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+	if (pending & CAUSEF_IP7)
+		do_IRQ(LOONGSON_TIMER_IRQ);
+#if defined(CONFIG_SMP)
+	else if (pending & CAUSEF_IP6)
+		loongson3_ipi_interrupt(NULL);
+#endif
+	else if (pending & CAUSEF_IP3)
+		ht_irqdispatch();
+	else if (pending & CAUSEF_IP2)
+		do_IRQ(LOONGSON_UART_IRQ);
+	else {
+		printk(KERN_ERR "%s : spurious interrupt\n", __func__);
+		spurious_interrupt();
+	}
+}
+
+static struct irqaction cascade_irqaction = {
+	.handler = no_action,
+	.name = "cascade",
+};
+
+void irq_router_init(void)
+{
+	int i;
+
+	/* route LPC int to cpu core0 int 0 */
+	LOONGSON_INT_ROUTER_LPC = LOONGSON_INT_CORE0_INT0;
+	/* route HT1 int0 ~ int7 to cpu core0 INT1*/
+	for (i = 0; i < 8; i++)
+		LOONGSON_INT_ROUTER_HT1(i) = LOONGSON_INT_CORE0_INT1;
+	/* enable HT1 interrupt */
+	LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
+	/* enable router interrupt intenset */
+	LOONGSON_INT_ROUTER_INTENSET = LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
+}
+
+void __init mach_init_irq(void)
+{
+	clear_c0_status(ST0_IM | ST0_BEV);
+
+	irq_router_init();
+	mips_cpu_irq_init();
+	init_i8259_irqs();
+
+	/* setup i8259 irq */
+	setup_irq(LOONGSON_I8259_IRQ, &cascade_irqaction);
+
+	set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+}
-- 
1.7.7.3




[Linux MIPS Home]     [LKML Archive]     [Linux ARM]     [Linux]     [Git]     [Photo]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

Add to Google Powered by Linux