|
|
|
[PATCH 27/35] MIPS: PNX83xx, PNX8550: Cleanup files effected by firmware changes. | |
| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] | |
From: "Steven J. Hill" <sjhill@xxxxxxxx>
Make headers consistent across the files and make changes based on
running the checkpatch script.
Signed-off-by: Steven J. Hill <sjhill@xxxxxxxx>
---
arch/mips/pnx833x/common/setup.c | 35 ++++++-------------
arch/mips/pnx833x/stb22x/board.c | 45 ++++++++++--------------
arch/mips/pnx8550/common/setup.c | 62 +++++++++++++++-------------------
arch/mips/pnx8550/jbs/init.c | 38 ++++-----------------
arch/mips/pnx8550/stb810/prom_init.c | 25 +++++---------
5 files changed, 71 insertions(+), 134 deletions(-)
diff --git a/arch/mips/pnx833x/common/setup.c b/arch/mips/pnx833x/common/setup.c
index 3ea4926..f744b80 100644
--- a/arch/mips/pnx833x/common/setup.c
+++ b/arch/mips/pnx833x/common/setup.c
@@ -1,33 +1,20 @@
/*
- * setup.c: Setup PNX833X Soc.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@xxxxxxx>
- * Daniel Laird <daniel.j.laird@xxxxxxx>
+ * Setup PNX833X SOC. Based on software written by
+ * Nikita Youshchenko <yoush@xxxxxxxxxx> from PNX8550 code.
*
- * Based on software written by:
- * Nikita Youshchenko <yoush@xxxxxxxxxx>, based on PNX8550 code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Copyright 2008 NXP Semiconductors
+ * Authors: Chris Steel <chris.steel@xxxxxxx>
+ * Daniel Laird <daniel.j.laird@xxxxxxx>
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
#include <linux/pci.h>
+
#include <asm/reboot.h>
+
#include <pnx833x.h>
#include <gpio.h>
diff --git a/arch/mips/pnx833x/stb22x/board.c b/arch/mips/pnx833x/stb22x/board.c
index cdf1a3b..80e12ee 100644
--- a/arch/mips/pnx833x/stb22x/board.c
+++ b/arch/mips/pnx833x/stb22x/board.c
@@ -1,31 +1,20 @@
/*
- * board.c: STB225 board support.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * Copyright 2008 NXP Semiconductors
- * Chris Steel <chris.steel@xxxxxxx>
- * Daniel Laird <daniel.j.laird@xxxxxxx>
+ * STB225 board support based on software written by
+ * Nikita Youshchenko <yoush@xxxxxxxxxx> from PNX8550 code.
*
- * Based on software written by:
- * Nikita Youshchenko <yoush@xxxxxxxxxx>, based on PNX8550 code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Copyright 2008 NXP Semiconductors
+ * Authors: Chris Steel <chris.steel@xxxxxxx>
+ * Daniel Laird <daniel.j.laird@xxxxxxx>
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/init.h>
-#include <linux/mm.h>
+#include <linux/bootmem.h>
+
#include <asm/fw/fw.h>
-#include <pnx833x.h>
+
#include <gpio.h>
/* endianess twiddlers */
@@ -94,9 +83,6 @@ void __init pnx833x_board_setup(void)
PNX833X_MIU_SEL0_TIMING = 0x50003081;
PNX833X_MIU_SEL1_TIMING = 0x50003081;
- /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
- pnx833x_gpio_select_function_alt(0);
-
/* Setup GPIO 04 to input NAND read/busy signal */
pnx833x_gpio_select_function_io(4);
pnx833x_gpio_select_input(4);
@@ -115,8 +101,11 @@ void __init pnx833x_board_setup(void)
PNX833X_MIU_SEL1 = 1;
PNX833X_MIU_SEL0_TIMING = 0x6A08D082;
PNX833X_MIU_SEL1_TIMING = 0x6A08D082;
+#endif
- /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */
+ /*
+ * Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed,
+ * so does not need this)
+ */
pnx833x_gpio_select_function_alt(0);
-#endif
}
diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c
index b8ae54c..abe585e 100644
--- a/arch/mips/pnx8550/common/setup.c
+++ b/arch/mips/pnx8550/common/setup.c
@@ -1,45 +1,21 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * 2.6 port, Embedded Alley Solutions, Inc
+ * Setup based on Per Hallsmark, per.hallsmark@xxxxxxxxxx
*
- * Based on Per Hallsmark, per.hallsmark@xxxxxxxxxx
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * Copyright 2005 Embedded Alley Solutions, Inc <source@xxxxxxxxxxxxxxxxx>
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-#include <asm/cpu.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/fw/fw.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
#include <glb.h>
-#include <int.h>
#include <pci.h>
#include <uart.h>
-#include <nand.h>
extern void __init board_setup(void);
extern void pnx8550_machine_restart(char *);
@@ -89,16 +65,34 @@ unsigned long get_system_mem_size(void)
int pnx8550_console_port = -1;
+/* used by early printk */
+void prom_putchar(char c)
+{
+ if (pnx8550_console_port != -1) {
+ /* Wait until FIFO not full */
+ while (((ip3106_fifo(UART_BASE, pnx8550_console_port) &
+ PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16)
+ ;
+
+ /* Send one char */
+ ip3106_fifo(UART_BASE, pnx8550_console_port) = c;
+ }
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
void __init plat_mem_setup(void)
{
int i;
- char* argptr;
+ char *argptr;
board_setup(); /* board specific setup */
- _machine_restart = pnx8550_machine_restart;
- _machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_halt;
+ _machine_restart = pnx8550_machine_restart;
+ _machine_halt = pnx8550_machine_halt;
+ pm_power_off = pnx8550_machine_halt;
/* Clear the Global 2 Register, PCI Inta Output Enable Registers
Bit 1:Enable DAC Powerdown
diff --git a/arch/mips/pnx8550/jbs/init.c b/arch/mips/pnx8550/jbs/init.c
index e682446..cc69bac 100644
--- a/arch/mips/pnx8550/jbs/init.c
+++ b/arch/mips/pnx8550/jbs/init.c
@@ -1,37 +1,14 @@
/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * Copyright 2005 Embedded Alley Solutions, Inc
- * source@xxxxxxxxxxxxxxxxx
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Copyright 2005 Embedded Alley Solutions, Inc <source@xxxxxxxxxxxxxxxxx>
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
#include <linux/bootmem.h>
-#include <asm/addrspace.h>
+
#include <asm/fw/fw.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
const char *get_system_type(void)
{
@@ -44,7 +21,6 @@ void __init prom_init(void)
fw_init_cmdline();
- //memsize = 0x02800000; /* Trimedia uses memory above */
- memsize = 0x08000000; /* Trimedia uses memory above */
+ memsize = 0x08000000; /* Trimedia uses memory above */
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/pnx8550/stb810/prom_init.c b/arch/mips/pnx8550/stb810/prom_init.c
index cb1b052..58d2765 100644
--- a/arch/mips/pnx8550/stb810/prom_init.c
+++ b/arch/mips/pnx8550/stb810/prom_init.c
@@ -1,25 +1,16 @@
/*
- * STB810 specific prom routines
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*
- * Author: MontaVista Software, Inc.
- * source@xxxxxxxxxx
+ * STB810 specific prom routines.
*
- * Copyright 2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
+ * Copyright 2005 MontaVista Software Inc. <source@xxxxxxxxxx>
+ * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
#include <linux/bootmem.h>
-#include <asm/addrspace.h>
+
#include <asm/fw/fw.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
const char *get_system_type(void)
{
@@ -32,6 +23,6 @@ void __init prom_init(void)
fw_init_cmdline();
- memsize = 0x08000000; /* Trimedia uses memory above */
+ memsize = 0x08000000; /* Trimedia uses memory above */
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
--
1.7.10.3
[Linux MIPS Home] [LKML Archive] [Linux ARM] [Linux] [Git] [Photo] [Yosemite News] [Linux SCSI] [Linux Hams]
|
|