[PATCH V2 08/14] MIPS: lantiq: clear all irqs properly on boot

[John Crispin <blogic@xxxxxxxxxxx>]

Due to missing brackets, the irq modules were not properly reset on boot.

Signed-off-by: John Crispin <blogic@xxxxxxxxxxx>

---
Changes in V2
* make the commit message accurate

 arch/mips/lantiq/irq.c |   11 ++++++-----
 1 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c
index d673731..b6b1c72 100644
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
@@ -271,12 +271,13 @@ void __init arch_init_irq(void)
 	if (!ltq_eiu_membase)
 		panic("Failed to remap eiu memory");
 
-	/* make sure all irqs are turned off by default */
-	for (i = 0; i < 5; i++)
+	/* turn off all irqs by default */
+	for (i = 0; i < 5; i++) {
+		/* make sure all irqs are turned off by default */
 		ltq_icu_w32(0, LTQ_ICU_IM0_IER + (i * LTQ_ICU_OFFSET));
-
-	/* clear all possibly pending interrupts */
-	ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+		/* clear all possibly pending interrupts */
+		ltq_icu_w32(~0, LTQ_ICU_IM0_ISR + (i * LTQ_ICU_OFFSET));
+	}
 
 	mips_cpu_irq_init();
 
-- 
1.7.9.1