[PATCH 3/3] MIPS: Alchemy: handle db1200 cpld ints as they come in

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Remove the loop in the cascade handler and instead unconditionally
handle just the first set interrupt coming from the CPLD.

This gets rid of a lot of spurious interrupts being triggered for
the SMSC91111 ethernet chip especially under high(er) IDE load:
"eth0: spurious interrupt (mask = 0xb3)"

Verified on DB1200 and DB1300.

Signed-off-by: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
---
 arch/mips/alchemy/devboards/bcsr.c |    5 +----
 1 files changed, 1 insertions(+), 4 deletions(-)

diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c
index 1e83ce2..f2039ef 100644
--- a/arch/mips/alchemy/devboards/bcsr.c
+++ b/arch/mips/alchemy/devboards/bcsr.c
@@ -90,10 +90,7 @@ static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d)
 	unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT);
 
 	disable_irq_nosync(irq);
-
-	for ( ; bisr; bisr &= bisr - 1)
-		generic_handle_irq(bcsr_csc_base + __ffs(bisr));
-
+	generic_handle_irq(bcsr_csc_base + __ffs(bisr));
 	enable_irq(irq);
 }
 
-- 
1.7.8.4




[Linux MIPS Home]     [LKML Archive]     [Linux ARM]     [Linux]     [Git]     [Photo]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

Add to Google Powered by Linux