| [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] |
Hi all,
Thank you for your help.
Thanks to
Christian Hack
Jonathan
Lance levsen
Skylar Thompson
and
Michael Cheshire for their answers.
All of them said that I wouldn't have selected my network card module
correctly.
I rebuild the kernel with most of the network cards selected. ( Here is
another problem. I know this is not the right way.) and now the eth0 is
up. But dmesg gives me lots of errors. ( since i selected all possible
network card and the kernel is not able to locate them ).
Why i selected most of the network cards is because after the new kernel is
up an running, I may have to put additional network card ( mostly it will
be eepro or dlink). So i thought why to take a chance and compiled all
modules into kernel. I think the right way to avoid these messages is to
compile additional network cards as modules ( am i right ? ).
I am attaching the dmesg output for your reference. Please advice me on
this regard.
regards
sudheesh
--
IOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007fc0000 (usable)
BIOS-e820: 0000000007fc0000 - 0000000007ff8000 (ACPI data)
BIOS-e820: 0000000007ff8000 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
127MB LOWMEM available.
On node 0 totalpages: 32704
zone(0): 4096 pages.
zone(1): 28608 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=new ro root=302 BOOT_FILE=/boot/vmlinuz
Found and enabled local APIC!
Initializing CPU#0
Detected 1694.543 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3381.65 BogoMIPS
Memory: 125776k/130816k available (1893k kernel code, 4652k reserved, 730k data, 180k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
per-CPU timeslice cutoff: 731.29 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1694.5300 MHz.
..... host bus clock speed is 99.6780 MHz.
cpu: 0, clocks: 996780, slice: 498390
CPU0<T0:996768,T1:498368,D:10,S:498390,C:996780>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 5
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: ST340810A, ATA DISK drive
hdc: GCR-8521B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c040fc24, I/O limit 4095Mb (mask 0xffffffff)
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
0 3c515 cards found.
cs89x0:cs89x0_probe(0x0)
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
PP_addr=0xffff
eth0: incorrect signature 0xffff
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
D-Link DE-620 pocket adapter not identified in the printer port
eth7: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 11 for device 02:0d.0
eth0: D-Link DFE-538TX (RealTek RTL8139) at 0xd800, 00:40:05:66:7d:11, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
atp.c:v1.09 8/9/2000 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/atp.html
eth1: i82596 initialization timed out
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected Intel i845 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on Intel i845 @ 0xf8000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on Intel i845 @ 0xf8000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
es1371: version v0.30 time 10:47:43 Feb 12 2003
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:1f.2
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0xef40, IRQ 11
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:1f.4
PCI: Setting latency timer of device 00:1f.4 to 64
uhci.c: USB UHCI at I/O 0xef80, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (1022 buckets, 8176 max) - 292 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 180k freed
hub.c: new USB device 00:1f.4-2, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
Adding Swap: 2048276k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
--
Sudheesh K
Software Engineer EDA
Softjin Infotech Pvt. Ltd.
No 227/70/A Sigma Arcade 1
Marathahalli
Airport Road,
Bangalore - 560037
Phone: 91-080-5234641/2 ext 206
Fax: 91-080-5234643
--------------------------------------------------------------------------------
This e-mail message and any files transmitted with it are intended solely for
the use of the individual or entity to which they are addressed. It may contain
confidential, proprietary or legally privileged information. If you are not the
intended recipient please be advised that you have received this message in
error and any use is strictly prohibited. Please immediately delete it and all
copies of it from your system, destroy any hard copies of it and notify the
sender by return mail. You must not, directly or indirectly, use, disclose,
distribute, print, or copy any part of this message if you are not the intended
recipient.
------------------------------------------------------------------------------
_______________________________________________
LinuxManagers mailing list - http://www.linuxmanagers.org
submissions: LinuxManagers@linuxmanagers.org
subscribe/unsubscribe: http://www.linuxmanagers.org/mailman/listinfo/linuxmanagers
[Home] [Kernel List] [Linux SCSI] [Video 4 Linux] [Linux Admin] [Yosemite News] [Motherboards]