Linux LVM

Thread Index

[Prev Page][Next Page]

Re: thin-provisioning-tools not part of lvm?
- From: Joe Thornber <thornber@redhat.com>
thin-provisioning-tools not part of lvm?
- From: Phillip Susi <psusi@ubuntu.com>
[maybe off-topic] which software project for a aix disk partition scanner for linux
- From: Philippe De Muyter <phdm@macq.eu>
Re: determining boot disk name(/dev/sd...) on RHEL LVM
- From: Venkata rama krishna Boddu <venkat.boddu@ymail.com>
Re: LVM snapshots and filesystem quiescence
- From: Bryan Whitehead <driver@megahappy.net>
Re: problem mounting the lvm drive
- From: Mahmood Naderan <nt_mahmood@yahoo.com>
problem mounting the lvm drive
- From: Mahmood Naderan <nt_mahmood@yahoo.com>
Re: determining boot disk name(/dev/sd...) on RHEL LVM
- From: Marian Csontos <mcsontos@redhat.com>
determining boot disk name(/dev/sd...) on RHEL LVM
- From: siva krishna <hisivakrishna@gmail.com>
Re: LVM snapshots and filesystem quiescence
- From: Clay Gerrard <clay.gerrard@gmail.com>
Re: LVM snapshots and filesystem quiescence
- From: Tanstaafl <tanstaafl@libertytrek.org>
Re: LVM snapshots and filesystem quiescence
- From: Les Mikesell <lesmikesell@gmail.com>
Re: LVM snapshots and filesystem quiescence
- From: Tom Coughlan <coughlan@redhat.com>
Re: How big can an LVM mirror log get?
- From: Brassow Jonathan <jbrassow@redhat.com>
LVM snapshots and filesystem quiescence
- From: Tanstaafl <tanstaafl@libertytrek.org>
Re: LVM recovery / Xen / Testdisk
- From: Errol Neal <eneal@businessgrade.com>
LVM recovery / Xen / Testdisk
- From: "mitch@bitblock.net" <mitch@bitblock.net>
specifying contiguous yields odd results
- From: ben <benscott@nwlink.com>
lvm-xen hdd disaster recovery - looking urgently for paid consultant
- From: "michelepbx@gmail.com" <michelepbx@gmail.com>
How big can an LVM mirror log get?
- From: Ben <benscott@nwlink.com>
Re: (LONG) Delay when writing to LVM after boot
- From: L A Walsh <lvm@tlinx.org>
Re: (LONG) Delay when writing to LVM after boot
- From: Brassow Jonathan <jbrassow@redhat.com>
Re: (LONG) Delay when writing to LVM after boot
- From: Marian Csontos <mcsontos@redhat.com>
Re: fdisk can't recognize partition tables
- From: Marian Csontos <mcsontos@redhat.com>
(LONG) Delay when writing to LVM after boot
- From: Ken Bass <daytooner@gmail.com>
fdisk can't recognize partition tables
- From: Amandeep Kapila <kapila.amandeep@gmail.com>
Re: raid1 Failed to activate new LV
- From: Brassow Jonathan <jbrassow@redhat.com>
lvm snapshot corruption
- From: Jay Denebeim <denebeim@gmail.com>
Re: Insufficient free space: 1 extents needed, but only 0 available with 32.83g available
- From: "Brian J. Murrell" <brian@interlinx.bc.ca>
Re: Insufficient free space: 1 extents needed, but only 0 available with 32.83g available
- From: Marian Csontos <mcsontos@redhat.com>
Alert before LVM snapshot becomes full
- From: Loïc <loic@recisio.com>
Insufficient free space: 1 extents needed, but only 0 available with 32.83g available
- From: "Brian J. Murrell" <brian@interlinx.bc.ca>
benefit of lvmetad in simply daily snaps?
- From: L A Walsh <lvm@tlinx.org>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: vg disappeared after replacing disc in raid10
- From: "Björn Nadrowski" <bjrnfrdnnd@gmail.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: vg disappeared after replacing disc in raid10
- From: "Björn Nadrowski" <bjrnfrdnnd@gmail.com>
Re: vg disappeared after replacing disc in raid10
- From: "Björn Nadrowski" <bjrnfrdnnd@gmail.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: LVM thin LV filesystem superblock corruption
- From: Mike Snitzer <snitzer@redhat.com>
Re: vg disappeared after replacing disc in raid10
- From: "Björn Nadrowski" <bjrnfrdnnd@gmail.com>
Re: vg disappeared after replacing disc in raid10
- From: "Björn Nadrowski" <bjrnfrdnnd@gmail.com>
Re: LVM thin LV filesystem superblock corruption
- From: Andres Toomsalu <andres@active.ee>
Re: vg disappeared after replacing disc in raid10
- From: Björn Nadrowski <bjrnfrdnnd@gmail.com>
Re: LVM thin LV filesystem superblock corruption
- From: Andres Toomsalu <andres@active.ee>
vg disappeared after replacing disc in raid10
- From: "Björn Nadrowski" <bjrnfrdnnd@gmail.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: vg disappeared after replacing disc in raid10
- From: Björn Nadrowski <bjrnfrdnnd@gmail.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
LVM thin LV filesystem superblock corruption
- From: Andres Toomsalu <andres@active.ee>
vg disappeared after replacing disc in raid10
- From: "Björn Nadrowski" <bjrnfrdnnd@gmail.com>
Re: vg disappeared after replacing disc in raid10
- From: Stuart D Gathman <stuart@bmsi.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: Error Attempting to Create LV on Clustered VG
- From: Marc Smith <marc.smith@mcc.edu>
Re: Error Attempting to Create LV on Clustered VG
- From: David Teigland <teigland@redhat.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: Error Attempting to Create LV on Clustered VG
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Zdenek Kabelac <zkabelac@redhat.com>
Error Attempting to Create LV on Clustered VG
- From: Marc Smith <marc.smith@mcc.edu>
Re: [PATCH 00/10] Enhancements to a clustered logical volume activation
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: lvm2 portability issues (GNU sed is assumed)
- From: John Spencer <maillist-lvm@barfooze.de>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: David Teigland <teigland@redhat.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 00/10] Enhancements to a clustered logical volume activation
- From: Alasdair G Kergon <agk@redhat.com>
Re: [PATCH 01/10] lvchange: Allow cluster lock conversion
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 01/10] lvchange: Allow cluster lock conversion
- From: David Teigland <teigland@redhat.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: David Teigland <teigland@redhat.com>
Re: [PATCH 01/10] lvchange: Allow cluster lock conversion
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 10/10] man: document --node option to lvchange
- From: David Teigland <teigland@redhat.com>
Re: [PATCH 01/10] lvchange: Allow cluster lock conversion
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: [PATCH 01/10] lvchange: Allow cluster lock conversion
- From: David Teigland <teigland@redhat.com>
[PATCH 03/10] clvmd: Allow node names to be obtained from corosync's CMAP
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 09/10] man: document --force option to lvchange, provide examples
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 04/10] clvmd: fix positive return value is not an error in csid->name translation
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 07/10] locking: Allow lock management (activation, deactivation, conversion) on a remote nodes
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 10/10] man: document --node option to lvchange
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 08/10] lvchange: implement remote lock management
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 06/10] clvmd: additional debugging - print message bodies
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 01/10] lvchange: Allow cluster lock conversion
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 05/10] clvmd: use correct flags for local command execution
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 00/10] Enhancements to a clustered logical volume activation
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
[PATCH 02/10] clvmd: Fix buffer size
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: David Teigland <teigland@redhat.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: David Teigland <teigland@redhat.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG [SOLVED]
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: [PATCH 4/2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: Mike Snitzer <msnitzer@fedoraproject.org>
Re: [Yum-devel] [PATCH 4/2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: James Antill <james@fedoraproject.org>
Re: [Yum-devel] [PATCH 4/2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: James Antill <james@fedoraproject.org>
Re: [PATCH 4/2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: James Antill <james@fedoraproject.org>
[PATCH 4/2 v3] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: Mike Snitzer <msnitzer@fedoraproject.org>
Re: [PATCH 4/2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: Mike Snitzer <msnitzer@fedoraproject.org>
[PATCH 4/2 v2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: Mike Snitzer <msnitzer@fedoraproject.org>
Re: [PATCH 4/2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: Mike Snitzer <msnitzer@fedoraproject.org>
Re: LVM snapshot with Clustered VG
- From: Andreas Pflug <pgadmin@pse-consulting.de>
[PATCH 4/2] fs snapshot plugin: add LVM tag to allow tools to link pre and post snapshots
- From: Mike Snitzer <msnitzer@fedoraproject.org>
[PATCH 3/2] fs snapshot plugin: add ability to create snapshots during post transaction
- From: Mike Snitzer <msnitzer@fedoraproject.org>
[PATCH 2/2] fs snapshot plugin: add support for snapshotting thinly provisioned LVM volumes
- From: Mike Snitzer <msnitzer@fedoraproject.org>
[PATCH 1/2] fs snapshot plugin: fix inspect_volume_lvm to use supported dmsetup splitname options
- From: Mike Snitzer <msnitzer@fedoraproject.org>
Re: pvmove doesn't work the way the man page says
- From: Phillip Susi <phillsusi@gmail.com>
[PATCH 0/2] yum-utils fs snapshot plugin: fix old LVM snapshots and add thinp support
- From: Mike Snitzer <msnitzer@fedoraproject.org>
Re: LVM snapshot with Clustered VG
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: LVM snapshot with Clustered VG
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: LVM snapshot with Clustered VG
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: LVM snapshot with Clustered VG
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: co-operative snapshots
- From: Alasdair G Kergon <agk@redhat.com>
co-operative snapshots
- From: Jaco Kroon <jaco@uls.co.za>
Re: potential locking issues
- From: Jaco Kroon <jaco@uls.co.za>
Re: LVM snapshot with Clustered VG
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
Re: LVM snapshot with Clustered VG
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Why I/O test on LVM image (KVM) works suspicious compared to raw file image via varmail.f in Filebench benchmark?
- From: Zhang Zhaoning <zzningxp@gmail.com>
Re: raid1 Failed to activate new LV
- From: Marian Csontos <mcsontos@redhat.com>
Re: raid1 Failed to activate new LV
- From: "MOLLE Thomas" <t.molle@neopost.com>
Re: raid1 Failed to activate new LV
- From: Marian Csontos <mcsontos@redhat.com>
Re: How does LVM-Cache work?
- From: thornber@redhat.com
Re: raid1 Failed to activate new LV
- From: "MOLLE Thomas" <t.molle@neopost.com>
Re: How does LVM-Cache work?
- From: Greg Zapp <greg.zapp@gmail.com>
Re: How does LVM-Cache work?
- From: Leo Antonio <heiligerstein@gmail.com>
Re: raid1 Failed to activate new LV
- From: Alasdair G Kergon <agk@redhat.com>
raid1 Failed to activate new LV
- From: "MOLLE Thomas" <t.molle@neopost.com>
Re: How does LVM-Cache work?
- From: thornber@redhat.com
Re: How does LVM-Cache work?
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
How does LVM-Cache work?
- From: Leo Antonio <heiligerstein@gmail.com>
Re: lvm2 portability issues (GNU sed is assumed)
- From: John Spencer <maillist-lvm@barfooze.de>
Re: [PATCH] fix missing include directives
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Re: [PATCH] fix missing include directives
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: [PATCH] fix broken sed statement that works only with GNU sed
- From: John Spencer <maillist-lvm@barfooze.de>
Re: [PATCH] fix missing include directives
- From: John Spencer <maillist-lvm@barfooze.de>
dmeventd fails to release V_vg lock
- From: Jaco Kroon <jaco@uls.co.za>
potential locking issues
- From: Jaco Kroon <jaco@uls.co.za>
Re: resize and snapshots with clvm
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: resize and snapshots with clvm
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: resize and snapshots with clvm
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: resize and snapshots with clvm
- From: Jacek Konieczny <jajcus@jajcus.net>
resize and snapshots with clvm
- From: Andreas Pflug <pgadmin@pse-consulting.de>
Re: pvmove doesn't work the way the man page says
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: pvmove doesn't work the way the man page says
- From: Marian Csontos <mcsontos@redhat.com>
Re: pvmove doesn't work the way the man page says
- From: Alasdair G Kergon <agk@redhat.com>
Re: pvmove doesn't work the way the man page says
- From: Marian Csontos <mcsontos@redhat.com>
Fwd: Re: [lvm-devel] create physical partition from logical partition
- From: Marian Csontos <mcsontos@redhat.com>
intel raid controller 632xESB and dmraid
- From: "Madovsky" <infos@madovsky.org>
Re: pvmove doesn't work the way the man page says
- From: Alasdair G Kergon <agk@redhat.com>
Re: pvmove doesn't work the way the man page says
- From: Spelic <spelic@shiftmail.org>
pvmove doesn't work the way the man page says
- From: Phillip Susi <psusi@ubuntu.com>
Re: Data alignment
- From: Mike Snitzer <snitzer@redhat.com>
Data alignment
- From: Phillip Susi <psusi@ubuntu.com>
Re: Slow boot with large number of thin snapshots
- From: Marian Csontos <mcsontos@redhat.com>
Re: Removing a (potentially unused?) PV from a VG
- From: Marian Csontos <mcsontos@redhat.com>
Re: [PATCH] fix broken sed statement that works only with GNU sed
- From: John Spencer <maillist-lvm@barfooze.de>
Re: [PATCH] fix missing include directives
- From: John Spencer <maillist-lvm@barfooze.de>
Removing a (potentially unused?) PV from a VG
- From: Harold Pimentel <haroldpimentel@gmail.com>
cman+pacemaker dual primary drbd for HA KVM w/ live migration
- From: "Mario Linick" <Mario.Linick@dahme-spreewald.de>
Re: create physical partition from logical partition
- From: Marian Csontos <mcsontos@redhat.com>
Slow boot with large number of thin snapshots
- From: Andres Toomsalu <andres@opennodecloud.com>
Re : create physical partition from logical partition
- From: georges.giralt@free.fr
create physical partition from logical partition
- From: fakhreddine HABIB <fakhreddine2006@gmail.com>
Re: Sparse LVs, --virtualsize equal to --size
- From: Vangelis Koukis <vkoukis@grnet.gr>
Re: LVM mirror logic bug?
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: LVM mirror logic bug?
- From: Alasdair G Kergon <agk@redhat.com>
LVM mirror logic bug?
- From: Robert <namibianer@gmail.com>
[PATCH] fix broken sed statement that works only with GNU sed
- From: John Spencer <maillist-lvm@barfooze.de>
[PATCH] fix missing include directives
- From: John Spencer <maillist-lvm@barfooze.de>
Re: Sparse LVs, --virtualsize equal to --size
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: lvm2 portability issues (GNU sed is assumed)
- From: John Spencer <maillist-lvm@barfooze.de>
[PATCH] rename 'mirror_region_size' to the more generic 'raid_region_size'
- From: Jonathan Brassow <jbrassow@redhat.com>
open count 1 blocking me from removing unused lv..
- From: mixalis cossenas <mixalis@evoip.gr>
Re: lvm2 portability issues (GNU sed is assumed)
- From: Alasdair G Kergon <agk@redhat.com>
lvm2 portability issues (GNU sed is assumed)
- From: John Spencer <maillist-lvm@barfooze.de>
autoconf/install-sh: not found
- From: John Spencer <maillist-lvm@barfooze.de>
Re: Help with a confused lv
- From: Andrew Walsh <awalsh@e-walsh.net>
Re: Sparse LVs, --virtualsize equal to --size
- From: Vangelis Koukis <vkoukis@grnet.gr>
Re: zeroed target
- From: Mikulas Patocka <mpatocka@redhat.com>
Re: Sparse LVs, --virtualsize equal to --size
- From: Marian Csontos <mcsontos@redhat.com>
Re: LVM resize broken file system....
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Re: LVM resize broken file system....
- From: Gabriel <jarod125@gmail.com>
Just to add some further info to my previous post........
- From: Another Sillyname <anothersname@googlemail.com>
LVM resize broken file system....
- From: Another Sillyname <anothersname@googlemail.com>
Help with a confused lv
- From: "Dr. David Alan Gilbert" <dave@treblig.org>
Re: Sparse LVs, --virtualsize equal to --size
- From: Vangelis Koukis <vkoukis@grnet.gr>
Re: Sparse LVs, --virtualsize equal to --size
- From: Alasdair G Kergon <agk@redhat.com>
Re: Sparse LVs, --virtualsize equal to --size
- From: Vangelis Koukis <vkoukis@grnet.gr>
Re: Sparse LVs, --virtualsize equal to --size
- From: Vangelis Koukis <vkoukis@grnet.gr>
Re: Sparse LVs, --virtualsize equal to --size
- From: Alasdair G Kergon <agk@redhat.com>
Re: Sparse LVs, --virtualsize equal to --size
- From: Stuart D Gathman <stuart@bmsi.com>
Re: Sparse LVs, --virtualsize equal to --size
- From: Alasdair G Kergon <agk@redhat.com>
Sparse LVs, --virtualsize equal to --size
- From: Vangelis Koukis <vkoukis@grnet.gr>
Re: vgremove fails to remove empty VG (v2.02.98)
- From: Marian Csontos <mcsontos@redhat.com>
Re: vgremove fails to remove empty VG (v2.02.98)
- From: Joschi Brauchle <joschi.brauchle@tum.de>
Re: vgremove fails to remove empty VG (v2.02.98)
- From: mohammad azimi <mohammad.reza.azimi@gmail.com>
Re: vgremove fails to remove empty VG (v2.02.98)
- From: Joschi Brauchle <joschi.brauchle@tum.de>
Re: vgremove fails to remove empty VG (v2.02.98)
- From: Marian Csontos <mcsontos@redhat.com>
vgremove fails to remove empty VG (v2.02.98)
- From: Joschi Brauchle <joschi.brauchle@tum.de>
Re: howto avoid initializing a particular volume-group at boot time?
- From: Zdenek Kabelac <zkabelac@redhat.com>
Read/Write LV Extent Stats
- From: Robin Tan <wenpin81@hotmail.com>
Re: howto avoid initializing a particular volume-group at boot time?
- From: Heinz Mauelshagen <heinzm@redhat.com>
Re: question about extending snapshots
- From: Heinz Mauelshagen <heinzm@redhat.com>
question about extending snapshots
- From: Brian Chrisman <brchrisman@gmail.com>
Re: Snapshot causing segault
- From: Tyler Gates <tyler.gates@ats.coop>
Re: Snapshot causing segault
- From: Milan Broz <mbroz@redhat.com>
Re: Snapshot causing segault
- From: Tyler Gates <tyler.gates@ats.coop>
Re: LVM snapshot with Clustered VG
- From: Vladislav Bogdanov <bubble@hoster-ok.com>
LVM snapshot with Clustered VG
- From: Rob <lists@rarforge.com>
Re: Snapshot causing segault
- From: Stuart D Gathman <stuart@bmsi.com>
Re: label sector and non 512 byte sectors
- From: Stuart D Gathman <stuart@bmsi.com>
Re: label sector and non 512 byte sectors
- From: Alasdair G Kergon <agk@redhat.com>
Re: Snapshot causing segault
- From: Zdenek Kabelac <zkabelac@redhat.com>
Snapshot causing segfault
- From: Tyler Gates <tyler.gates@ats.coop>
label sector and non 512 byte sectors
- From: Phillip Susi <phillsusi@gmail.com>
Snapshot causing segault
- From: Tyler Gates <tyler.gates@ats.coop>
howto avoid initializing a particular volume-group at boot time?
- From: Tom Assmuth <ml-lvm@iss.tu-darmstadt.de>
Re: Changing owner of lv device with udev
- From: Nikolaus Rath <Nikolaus@rath.org>
Re: Changing owner of lv device with udev
- From: Nikolaus Rath <Nikolaus@rath.org>
Re: Problems with snapshot rollback
- From: Alasdair G Kergon <agk@redhat.com>
Problems with snapshot rollback
- From: Guillermo Schulman <guillermos@avature.net>
Re: Changing owner of lv device with udev
- From: Alasdair G Kergon <agk@redhat.com>
Changing owner of lv device with udev
- From: Nikolaus Rath <Nikolaus@rath.org>
Re: Non 512 byte sectors
- From: Phillip Susi <psusi@ubuntu.com>
Re: Non 512 byte sectors
- From: Mike Snitzer <snitzer@redhat.com>
Re: Non 512 byte sectors
- From: Phillip Susi <psusi@ubuntu.com>
Re: Non 512 byte sectors
- From: Mike Snitzer <snitzer@redhat.com>
Re: Non 512 byte sectors
- From: Stuart D Gathman <stuart@bmsi.com>
Re: Convert striped lv to single pv on another disk?
- From: Stuart D Gathman <stuart@bmsi.com>
Re: clvmd on cman waits forever holding the P_#global lock on node re-join
- From: Dmitry Panov <dmitry.panov@yahoo.co.uk>
Re: clvmd on cman waits forever holding the P_#global lock on node re-join
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: clvmd on cman waits forever holding the P_#global lock on node re-join
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: Convert striped lv to single pv on another disk?
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Convert striped lv to single pv on another disk?
- From: Gianluca Cecchi <gianluca.cecchi@gmail.com>
Re: Convert striped lv to single pv on another disk?
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Convert striped lv to single pv on another disk?
- From: Gianluca Cecchi <gianluca.cecchi@gmail.com>
Non 512 byte sectors
- From: Phillip Susi <psusi@ubuntu.com>
Convert striped lv to single pv on another disk?
- From: Gianluca Cecchi <gianluca.cecchi@gmail.com>
Re: Pvmove while volume_ list is enabled freeze whole lvm
- From: Gianluca Cecchi <gianluca.cecchi@gmail.com>
Re: Pvmove while volume_ list is enabled freeze whole lvm
- From: Gianluca Cecchi <gianluca.cecchi@gmail.com>
Re: clvmd on cman waits forever holding the P_#global lock on node re-join
- From: Dmitry Panov <dmitry.panov@yahoo.co.uk>
Re: clvmd on cman waits forever holding the P_#global lock on node re-join
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Pvmove while volume_ list is enabled freeze whole lvm
- From: Zdenek Kabelac <zkabelac@redhat.com>
Pvmove while volume_ list is enabled freeze whole lvm
- From: Gianluca Cecchi <gianluca.cecchi@gmail.com>
clvmd on cman waits forever holding the P_#global lock on node re-join
- From: Dmitry Panov <dmitry.panov@yahoo.co.uk>
Re: Questions about issue_discards
- From: Mike Snitzer <snitzer@redhat.com>
Re: Questions about issue_discards
- From: James Downs <james.downs@egontech.com>
Questions about issue_discards
- From: CJ Kucera <pez@apocalyptech.com>
Re: How to handle Bad Block relocation with LVM?
- From: "Brian J. Murrell" <brian@interlinx.bc.ca>
Re: How to handle Bad Block relocation with LVM?
- From: "Brian J. Murrell" <brian@interlinx.bc.ca>
Re: How to handle Bad Block relocation with LVM?
- From: Stuart D Gathman <stuart@bmsi.com>
Re: How to handle Bad Block relocation with LVM?
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: How to handle Bad Block relocation with LVM?
- From: "Brian J. Murrell" <brian@interlinx.bc.ca>
Re: Questions about thin pools and segment properties
- From: Zdenek Kabelac <zkabelac@redhat.com>
Questions about thin pools and segment properties
- From: ben <benscott@nwlink.com>
Re: How to handle Bad Block relocation with LVM?
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: How to handle Bad Block relocation with LVM?
- From: Brian Murrell <brian@interlinx.bc.ca>
Re: strange usage stats for thin LV
- From: Vitaly Yakovenko <mr.yaky@gmail.com>
Sync LVs in RAID
- From: DacioMF <daciomf@yahoo.com.br>
Re: strange usage stats for thin LV
- From: Lukáš Czerner <lczerner@redhat.com>
Re: strange usage stats for thin LV
- From: Andres Toomsalu <andres@active.ee>
LVM and Raid5 alignment
- From: majianpeng <majianpeng@gmail.com>
LVM decreasing throughput
- From: Embedding Linux <embedded@ba-cst.net>
Re: cluster request failed: Host is down
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: cluster request failed: Host is down
- From: Zdenek Kabelac <zkabelac@redhat.com>
cluster request failed: Host is down
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: Why do lvcreate with clvmd insist on VG being available on all nodes?
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Re: Why do lvcreate with clvmd insist on VG being available on all nodes?
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: Why do lvcreate with clvmd insist on VG being available on all nodes?
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Re: Why do lvcreate with clvmd insist on VG being available on all nodes?
- From: Jacek Konieczny <jajcus@jajcus.net>
Re: Why do lvcreate with clvmd insist on VG being available on all nodes?
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Why do lvcreate with clvmd insist on VG being available on all nodes?
- From: Jacek Konieczny <jajcus@jajcus.net>
strange usage stats for thin LV
- From: Vitaly Yakovenko <mr.yaky@gmail.com>
lvm2 "rebuild"
- From: frenc1z 1z <frenc1z@gmail.com>
Re: strange usage stats for thin LV
- From: Vitaly Yakovenko <mr.yaky@gmail.com>
lvm backup/restore on Amaxon ebs volumes
- From: Vladimir <tetlika@gmail.com>
Re: strange usage stats for thin LV
- From: Mike Snitzer <snitzer@redhat.com>
Re: strange usage stats for thin LV
- From: Andres Toomsalu <andres@active.ee>
Re: strange usage stats for thin LV
- From: Andres Toomsalu <andres@active.ee>
Re: how to swap a bad drive on a non-standard mirror
- From: Randy Schultz <schulra@earlham.edu>
Re: how to swap a bad drive on a non-standard mirror
- From: Scott Merrilees <scott.merrilees@gmail.com>
Re: how to swap a bad drive on a non-standard mirror
- From: Stuart D Gathman <stuart@bmsi.com>
Re: how to swap a bad drive on a non-standard mirror
- From: Stuart D Gathman <stuart@bmsi.com>
how to swap a bad drive on a non-standard mirror
- From: Randy Schultz <schulra@earlham.edu>
Do thin volumes use allocation policy?
- From: ben <benscott@nwlink.com>
Re: strange usage stats for thin LV
- From: Andres Toomsalu <andres@active.ee>
Re: strange usage stats for thin LV
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: strange usage stats for thin LV
- From: Andres Toomsalu <andres@active.ee>
Re: strange usage stats for thin LV
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: strange usage stats for thin LV
- From: Stuart D Gathman <stuart@bmsi.com>
strange usage stats for thin LV
- From: Andres Toomsalu <andres@active.ee>
Re: Error: Doesn't contain a valid partition table
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Error: Doesn't contain a valid partition table
- From: "James Hawtin" <oolon@ankh.org>
Error: Doesn't contain a valid partition table
- From: Ramesh Nadupalli <nadupalliramesh@gmail.com>
Re: how to recover after thin pool metadata did fill up?
- From: Andres Toomsalu <andres@active.ee>
Re: how to recover after thin pool metadata did fill up?
- From: Andres Toomsalu <andres@active.ee>
Re: how to recover after thin pool metadata did fill up?
- From: Andres Toomsalu <andres@active.ee>
Re: how to recover after thin pool metadata did fill up?
- From: Joe Thornber <thornber@redhat.com>
Re: how to recover after thin pool metadata did fill up?
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Re: how to recover after thin pool metadata did fill up?
- From: Joe Thornber <thornber@redhat.com>
Re: how to recover after thin pool metadata did fill up?
- From: Spelic <spelic@shiftmail.org>
Re: how to recover after thin pool metadata did fill up?
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: how to recover after thin pool metadata did fill up?
- From: Andres Toomsalu <andres@active.ee>
Re: Thin provisioning stability
- From: Andres Toomsalu <andres@active.ee>
Re: how to recover after thin pool metadata did fill up?
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Thin provisioning stability
- From: Joe Thornber <thornber@redhat.com>
Thin provisioning stability
- From: Алексей Порошенко <poroshenko.aleksei@gmail.com>
Need help with lvm
- From: Tinni <t_inni@yahoo.co.in>
how to recover after thin pool metadata did fill up?
- From: Andres Toomsalu <andres@active.ee>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: thin pool grows but meta data does not?
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
thin pool grows but meta data does not?
- From: ben <benscott@nwlink.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Mark Woodward <markw@mohawksoft.com>
Re: Will RAID or mirror thin pools be supported?
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Will RAID or mirror thin pools be supported?
- From: ben <benscott@nwlink.com>
bugzilla #862085: automatically filter disks with imsm or ddf superblocks, v3
- From: Miquel van Smoorenburg <mikevs@xs4all.net>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Mark Woodward <markw@mohawksoft.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: lvextend NEVER works but screws up
- From: Stuart D Gathman <stuart@bmsi.com>
Post-install LVM
- From: rodrigo tavares <rodrigofariat@yahoo.com.br>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Stuart D Gathman <stuart@bmsi.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Mark Woodward <markw@mohawksoft.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: lvextend NEVER works but screws up
- From: tariq wali <ganaiwali@gmail.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Mark Woodward <markw@mohawksoft.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Linda Walsh <lvm@tlinx.org>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Mark Woodward <markw@mohawksoft.com>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Linda Walsh <lvm@tlinx.org>
Re: access or interface to list of blocks that have, changed via C.O.W.?
- From: Mark Woodward <markw@mohawksoft.com>
Re: LVM2APP still under active development?
- From: Tony Asleson <tasleson@redhat.com>
LVM2APP still under active development?
- From: Bram Klein Gunnewiek <bramklg@gmail.com>
access or interface to list of blocks that have changed via C.O.W.?
- From: Linda Walsh <lvm@tlinx.org>
[PATCH] automatically filter disks with imsm or ddf superblocks, v3
- From: Miquel van Smoorenburg <mikevs@xs4all.net>
Re: [PATCH] automatically filter disks with imsm or ddf superblocks, v2
- From: Miquel van Smoorenburg <mikevs@xs4all.net>
How to reliably detect duplicate PVs with the same UUID
- From: Dénes Németh <mr.nemeth.denes@gmail.com>
Unable to remove LVs - problem solved.
- From: Jan Bakuwel <jan.bakuwel@omiha.com>
Unable to remove LVs
- From: Jan Bakuwel <jan.bakuwel@omiha.com>
[PATCH] automatically filter disks with imsm or ddf superblocks, v2
- From: Miquel van Smoorenburg <mikevs@xs4all.net>
Re: automatically filter disks with imsm or ddf superblocks
- From: Miquel van Smoorenburg <mikevs@xs4all.net>
[PATCH 6/6] python-lvm: Other Makefile.in changes
- From: Andy Grover <agrover@redhat.com>
[PATCH 5/6] python-lvm: configure.in changes
- From: Andy Grover <agrover@redhat.com>
[PATCH 1/6] python-lvm: initial checkin
- From: Andy Grover <agrover@redhat.com>
[PATCH 4/6] python-lvm: liblvm/python/Makefile.in
- From: Andy Grover <agrover@redhat.com>
[PATCH 0/6] Integrate python-lvm into lvm2
- From: Andy Grover <agrover@redhat.com>
[PATCH 3/6] python-lvm: setup.py
- From: Andy Grover <agrover@redhat.com>
[PATCH 2/6] python-lvm: A start at a python-lvm test framework
- From: Andy Grover <agrover@redhat.com>
Re: automatically filter disks with imsm or ddf superblocks
- From: Alasdair G Kergon <agk@redhat.com>
Re: merge two lvms on same VG
- From: Scott Merrilees <scott.merrilees@gmail.com>
Re: merge two lvms on same VG
- From: flavio-redhat@zipman.it
Re: merge two lvms on same VG
- From: tariq wali <ganaiwali@gmail.com>
Re: merge two lvms on same VG
- From: Fran Garcia <franchu.garcia@gmail.com>
merge two lvms on same VG
- From: tariq wali <ganaiwali@gmail.com>
Dose upstream have any plan to support mirrored in --mirrorlog option in cluster?
- From: deanraccoon <deanraccoon@gmail.com>
automatically filter disks with imsm or ddf superblocks
- From: Miquel van Smoorenburg <mikevs@xs4all.net>
Re: Advanced LVM Features
- From: Oliver Rath <rath@mglug.de>
Advanced LVM Features
- From: Mark Woodward <markw@mohawksoft.com>
Re: Removing vg and lv after physical drive has been removed
- From: "Rene C." <openvz@dokbua.com>
Re: Removing vg and lv after physical drive has been removed
- From: Scott Merrilees <scott@merrilees.net>
Re: Removing vg and lv after physical drive has been removed
- From: "Rene C." <openvz@dokbua.com>
Re: Removing vg and lv after physical drive has been removed
- From: Scott Merrilees <scott@merrilees.net>
Re: Removing vg and lv after physical drive has been removed
- From: "Rene C." <openvz@dokbua.com>
Re: Removing vg and lv after physical drive has been removed
- From: Scott Merrilees <scott@merrilees.net>
Re: Removing vg and lv after physical drive has been removed
- From: "Rene C." <openvz@dokbua.com>
Re: Removing vg and lv after physical drive has been removed
- From: "Rene C." <openvz@dokbua.com>
Re: Removing vg and lv after physical drive has been removed
- From: "Rene C." <openvz@dokbua.com>
Re: Removing vg and lv after physical drive has been removed
- From: Scott Merrilees <scott@merrilees.net>
Re: Removing vg and lv after physical drive has been removed
- From: Keith Keller <kkeller@wombat.san-francisco.ca.us>
Removing vg and lv after physical drive has been removed
- From: "Rene C." <openvz@dokbua.com>
Re: lvextend NEVER works but screws up
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: lvextend NEVER works but screws up
- From: tariq wali <ganaiwali@gmail.com>
Re: lvextend NEVER works but screws up
- From: Stuart D Gathman <stuart@bmsi.com>
Re: lvextend NEVER works but screws up
- From: Jonathan Tripathy <jonnyt@abpni.co.uk>
Re: [PATCH] dmsetup: fix sscanf return check
- From: Matthew Booth <mbooth@redhat.com>
Re: lvextend NEVER works but screws up
- From: tariq wali <ganaiwali@gmail.com>
Re: [PATCH] dmsetup: fix sscanf return check
- From: Alasdair G Kergon <agk@redhat.com>
Re: [PATCH] dmsetup: fix sscanf return check
- From: Mark van Dijk <lists+linux-lvm@internecto.net>
Re: lvextend NEVER works but screws up
- From: Stuart D Gathman <stuart@bmsi.com>
Re: lvextend NEVER works but screws up
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: lvextend NEVER works but screws up
- From: Brassow Jonathan <jbrassow@redhat.com>
Re: lvextend NEVER works but screws up
- From: "Vic" <lvm@beer.org.uk>
Re: lvextend NEVER works but screws up
- From: flavio-redhat@zipman.it
Re: lvextend NEVER works but screws up
- From: "Vic" <lvm@beer.org.uk>
lvextend NEVER works but screws up
- From: tariq wali <ganaiwali@gmail.com>
lvextend NEVER works but screws up
- From: tariq wali <ganaiwali@gmail.com>
[PATCH] dmsetup: fix sscanf return check
- From: Matthew Booth <mbooth@redhat.com>
Writing to a DM snapshot blocks for a long time
- From: David Shaw <dshaw@JABBERWOCKY.COM>
Re: Getting 'incorrect semaphore state' on self configured server kernel
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Getting 'incorrect semaphore state' on self configured server kernel
- From: Mark van Dijk <lists+linux-lvm@internecto.net>
Re: Getting 'incorrect semaphore state' on self configured server kernel
- From: Scott Merrilees <scott@merrilees.net>
Re: Getting 'incorrect semaphore state' on self configured server kernel
- From: Mark van Dijk <lists+linux-lvm@internecto.net>
Re: sparse copy i.e. /dev/sda3 -> /dev/mvlvm/mythinpool?
- From: James Hawtin <oolon@ankh.org>
sparse copy i.e. /dev/sda3 -> /dev/mvlvm/mythinpool?
- From: Oliver Rath <rath@mglug.de>
Re: Translating device name from sar to a filesystem
- From: Reza Gholdor <gholdorreza@gmail.com>
'vgchange -a y' took very long when scanning snapshots
- From: Olivier Doucet <webmaster@ajeux.com>
bug: xfs resize in fsadm
- From: Dénes Németh <mr.nemeth.denes@gmail.com>
Merged snapshot still present and throwing I/O errors after reboot (similar to bug #645488)
- From: Matti Rintala <bitti@cs.tut.fi>
Re: Translating device name from sar to a filesystem
- From: Scott Merrilees <scott@merrilees.net>
Translating device name from sar to a filesystem
- From: Reza Gholdor <gholdorreza@gmail.com>
Getting 'incorrect semaphore state' on self configured server kernel
- From: Mark van Dijk <lists+linux-lvm@internecto.net>
Re: [lvm2cmd] Heap destruction by lvm2_exit()?
- From: Hubert Kario <hubert@kario.pl>
Re: dm thinp: pool get's bigger than allowd virtual disk
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Re: dm thinp: pool get's bigger than allowd virtual disk
- From: Alasdair G Kergon <agk@redhat.com>
dm thinp: pool get's bigger than allowd virtual disk
- From: Stefan Priebe <s.priebe@profihost.ag>
Re: [lvm2cmd] Heap destruction by lvm2_exit()?
- From: Hubert Kario <hubert@kario.pl>
Re: lvm/filesystem overhaed
- From: Stuart D Gathman <stuart@bmsi.com>
Re: RFE? Really power of 2? extents, chunks and raid alignment
- From: "Linda A. Walsh" <law@tlinx.org>
Re: [lvm2cmd] Heap destruction by lvm2_exit()?
- From: Hubert Kario <hubert@kario.pl>
lvm/filesystem overhaed
- From: Tim Busch <tbusch666@gmail.com>
Re: [lvm2cmd] Heap destruction by lvm2_exit()?
- From: Alasdair G Kergon <agk@redhat.com>
Re: [lvm2cmd] Heap destruction by lvm2_exit()?
- From: Alasdair G Kergon <agk@redhat.com>
Really power of 2? extents, chunks and raid alignment
- From: Linda Walsh <lvm@tlinx.org>
Re: [lvm2cmd] Heap destruction by lvm2_exit()?
- From: Alasdair G Kergon <agk@redhat.com>
Incorrect PV displayed for VG with two missing PVs
- From: Mike Fleetwood <mike.fleetwood@googlemail.com>
[lvm2cmd] Heap destruction by lvm2_exit()?
- From: Hubert Kario <hubert@kario.pl>
Re: how to online resize pv?
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Re: how to online resize pv?
- From: andreas nastke <nastke@gdp-group.com>
Re: how to online resize pv?
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Re: how to online resize pv?
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: how to online resize pv?
- From: Stefan Priebe <s.priebe@profihost.ag>
Re: how to online resize pv?
- From: Stefan Priebe <s.priebe@profihost.ag>
Re: how to online resize pv?
- From: Stefan Priebe <s.priebe@profihost.ag>
Re: how to online resize pv?
- From: Scott Merrilees <scott.merrilees@gmail.com>
Re: how to online resize pv?
- From: Fred van Zwieten <fvzwieten@vxcompany.com>
Re: how to online resize pv?
- From: Stefan Priebe <s.priebe@profihost.ag>
Re: how to online resize pv?
- From: Stuart D Gathman <stuart@bmsi.com>
how to online resize pv?
- From: Stefan Priebe <s.priebe@profihost.ag>
Re: metadata problems while testing lvm2 git with dm_thin_pool
- From: Zdenek Kabelac <zkabelac@redhat.com>
metadata problems while testing lvm2 git with dm_thin_pool
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Re: metadata problems while testing lvm2 git with dm_thin_pool
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: metadata problems while testing lvm2 git with dm_thin_pool
- From: Sebastian Riemer <sebastian.riemer@profitbricks.com>
Re: metadata problems while testing lvm2 git with dm_thin_pool
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
lvm autogrow grows more than allowed virtual size
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Re: metadata problems while testing lvm2 git with dm_thin_pool
- From: Sebastian Riemer <sebastian.riemer@profitbricks.com>
metadata problems while testing lvm2 git with dm_thin_pool
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
metadata problems while testing lvm2 git with dm_thin_pool
- From: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Re: RFE? Really power of 2? extents, chunks and raid alignment
- From: Linda Walsh <lvm@tlinx.org>
Re: RFE? Really power of 2? extents, chunks and raid alignment
- From: Mike Snitzer <snitzer@redhat.com>
Re: RFE? Really power of 2? extents, chunks and raid alignment
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: Snapshot limit?
- From: Fred van Zwieten <fvzwieten@vxcompany.com>
Re: Snapshot limit?
- From: Mike Snitzer <snitzer@redhat.com>
Re: Snapshot limit?
- From: Mike Snitzer <snitzer@redhat.com>
Re: Snapshot limit?
- From: Fred van Zwieten <fvzwieten@vxcompany.com>
Snapshot limit?
- From: Fred van Zwieten <fvzwieten@vxcompany.com>
Re: LVM2 snapshotting and new blocks
- From: Stuart D Gathman <stuart@bmsi.com>
LVM2 snapshotting and new blocks
- From: Fred van Zwieten <fvzwieten@vxcompany.com>
RFE? Really power of 2? extents, chunks and raid alignment
- From: Linda Walsh <lvm@tlinx.org>
Re: Replacing failed disk in raid volume without hot spare
- From: Tomas Vanderka <tomas_vanderka@tempest.sk>
Re: Switch between mirrored master/slave devices
- From: Brassow Jonathan <jbrassow@redhat.com>
Re: Replacing failed disk in raid volume without hot spare
- From: Brassow Jonathan <jbrassow@redhat.com>
Replacing failed disk in raid volume without hot spare
- From: Tomas Vanderka <tomas_vanderka@tempest.sk>
LVM roadmap info
- From: Fred van Zwieten <fvzwieten@vxcompany.com>
Switch between mirrored master/slave devices
- From: DacioMF <daciomf@yahoo.com.br>
Re: (simple question) Is it possible to specify a size to extend an LVM partition to ? rather than the amount to increase by?
- From: Morgan Cox <morgancoxuk@gmail.com>
Re: (simple question) Is it possible to specify a size to extend an LVM partition to ? rather than the amount to increase by?
- From: Alasdair G Kergon <agk@redhat.com>
Re: (simple question) Is it possible to specify a size to extend an LVM partition to ? rather than the amount to increase by?
- From: Greg Zapp <greg.zapp@gmail.com>
(simple question) Is it possible to specify a size to extend an LVM partition to ? rather than the amount to increase by?
- From: Morgan Cox <morgancoxuk@gmail.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Mike Snitzer <snitzer@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Mike Snitzer <snitzer@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Lukáš Czerner <lczerner@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Lukáš Czerner <lczerner@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Hugh Dickins <hughd@google.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Hugh Dickins <hughd@google.com>
Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Hugh Dickins <hughd@google.com>
Re: Regression with FALLOC_FL_PUNCH_HOLE in 3.5-rc kernel
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Still missing for supporting dm-thin
- From: Spelic <spelic@shiftmail.org>
Re: Corrupt PV (wrong size)
- From: Richard Petty <richard@nugnug.com>
Re: Corrupt PV (wrong size)
- From: Stuart D Gathman <stuart@bmsi.com>
Re: Corrupt PV (wrong size)
- From: Richard Petty <richard@nugnug.com>
Re: Still missing for supporting dm-thin
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Still missing for supporting dm-thin
- From: Alasdair G Kergon <agk@redhat.com>
Still missing for supporting dm-thin
- From: Spelic <spelic@shiftmail.org>
Re: lvm create a large amount of lv seems problem
- From: "Amos.Huang" <ch.linux.free@gmail.com>
Re: lvm create a large amount of lv seems problem
- From: Zdenek Kabelac <zkabelac@redhat.com>
Consistency groups
- From: Mark Woodward <markw@mohawksoft.com>
Re: LVM2 recovery on IP-SAN after OS re-install
- From: tariq wali <ganaiwali@gmail.com>
Re: lvremove snapshot hangs LVM system
- From: Da <dcodix@gmail.com>
Re: LVM internals, guides, design, tutorials plz
- From: Ray Morris <support@bettercgi.com>
LVM internals, guides, design, tutorials plz
- From: Daniel Hilst <danielhilst@gmail.com>
Re: LVM2 recovery on IP-SAN after OS re-install
- From: "Bryn M. Reeves" <bmr@redhat.com>
lvm create a large amount of lv seems problem
- From: "Amos.Huang" <ch.linux.free@gmail.com>
Re: lvremove snapshot hangs LVM system
- From: Da <dcodix@gmail.com>
Re: lvremove snapshot hangs LVM system
- From: Da <dcodix@gmail.com>
[ANNOUNCE] targetd 0.1
- From: Andy Grover <agrover@redhat.com>
Re: Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory
- From: Simon Baatz <gmbnomis@gmail.com>
Re: Kernel 3.4 error on Dreamplug: [vectors]: mlock failed: Cannot allocate memory
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM download.
- From: Veruca Salt <verucasaltuk@hotmail.co.uk>
Re: LVM release 2.02.96 / git / veritysetup
- From: Alasdair G Kergon <agk@redhat.com>
Re: LVM release 2.02.96 / git / veritysetup
- From: Somchai Smythe <buraphalinuxserver@gmail.com>
Re: LVM release 2.02.96 / git / veritysetup
- From: Milan Broz <mbroz@redhat.com>
LVM release 2.02.96 / git / veritysetup
- From: Alasdair G Kergon <agk@redhat.com>
Re: LVM download.
- From: Alasdair G Kergon <agk@redhat.com>
Re: LVM download.
- From: Veruca Salt <verucasaltuk@hotmail.co.uk>
Re: LVM download.
- From: Veruca Salt <verucasaltuk@hotmail.co.uk>
Re: LVM download.
- From: "Bryn M. Reeves" <bmr@redhat.com>
LVM download.
- From: Veruca Salt <verucasaltuk@hotmail.co.uk>
Re: some principal questions about cLVM
- From: "Lentes, Bernd" <bernd.lentes@helmholtz-muenchen.de>
Re: some principal questions about cLVM
- From: Seb <mailing.sr@gmail.com>
Re: some principal questions about cLVM
- From: "Lentes, Bernd" <bernd.lentes@helmholtz-muenchen.de>
Re: some principal questions about cLVM
- From: Seb <mailing.sr@gmail.com>
The way i use to ensure the VG map (Need help)
- From: Germain Maurice <gmaurice@linkfluence.net>
some principal questions about cLVM
- From: "Lentes, Bernd" <bernd.lentes@helmholtz-muenchen.de>
Fw: Fw: Query on vgchange: Please help
- From: shashank khandelwal <khandu20@yahoo.com>
Revert snapshot (lvconvert --merge) without removing snapshot
- From: c8wpsungrk@snkmail.com
Re: Thin provisioning on a cluster
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM disappeared
- From: Brassow Jonathan <jbrassow@redhat.com>
Thin provisioning on a cluster
- From: Matthew Anderson <matthewa@base3.com.au>
preparing for impending switch to git/fedorahosted
- From: Jim Meyering <jim@meyering.net>
Re: /dev/vg1/dir-1: read failed after 0 of 4096 at ...
- From: Tero <termant@gmail.com>
/dev/vg1/dir-1: read failed after 0 of 4096 at ...
- From: Tero <termant@gmail.com>
LVM disappeared
- From: abdul jabbar <ajsaif_11@hotmail.com>
Re: LVM2 recovery on IP-SAN after OS re-install
- From: James Hawtin <oolon@ankh.org>
LVM2 recovery on IP-SAN after OS re-install
- From: tariq wali <ganaiwali@gmail.com>
Re: Isolation of volume groups
- From: Fredrik Tolf <fredrik@dolda2000.com>
Re: Isolation of volume groups
- From: Fredrik Tolf <fredrik@dolda2000.com>
Re: Isolation of volume groups
- From: "Bryn M. Reeves" <bmr@redhat.com>
Isolation of volume groups
- From: Fredrik Tolf <fredrik@dolda2000.com>
Re: Fun and games with mirroring
- From: Stuart D Gathman <stuart@bmsi.com>
Re: Fun and games with mirroring
- From: Stuart D Gathman <stuart@bmsi.com>
Re: Fun and games with mirroring
- From: Brassow Jonathan <jbrassow@redhat.com>
Re: Fun and games with mirroring
- From: tariq wali <ganaiwali@gmail.com>
Re: Fun and games with mirroring
- From: Les Mikesell <lesmikesell@gmail.com>
Re: Fun and games with mirroring
- From: Stuart D Gathman <stuart@bmsi.com>
Re: Fun and games with mirroring
- From: Les Mikesell <lesmikesell@gmail.com>
Re: Fun and games with mirroring
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Fun and games with mirroring
- From: Les Mikesell <lesmikesell@gmail.com>
Re: Fun and games with mirroring
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Fun and games with mirroring
- From: Les Mikesell <lesmikesell@gmail.com>
Re: Fun and games with mirroring
- From: Brassow Jonathan <jbrassow@redhat.com>
Re: Fun and games with mirroring
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: Fun and games with mirroring
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Fun and games with mirroring
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Fun and games with mirroring
- From: "Vic" <lvm@beer.org.uk>
Re: Is the new RAID implementation going to deprecate traditional stripes and mirrors?
- From: Brassow Jonathan <jbrassow@redhat.com>
Re: Fun and games with mirroring
- From: Stuart D Gathman <stuart@bmsi.com>
Re: Fun and games with mirroring
- From: "Vic" <lvm@beer.org.uk>
Re: Fun and games with mirroring
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Fun and games with mirroring
- From: "Vic" <lvm@beer.org.uk>
Re: Fun and games with mirroring
- From: Les Mikesell <lesmikesell@gmail.com>
Fun and games with mirroring
- From: "Vic" <lvm@beer.org.uk>
Re: lvreduce nightmare
- From: Raptorfan <raptorfan@earthlink.net>
Re: lvreduce nightmare
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: lvreduce nightmare
- From: Andy Smith <andy@strugglers.net>
Re: lvreduce nightmare
- From: tariq wali <ganaiwali@gmail.com>
Re: lvreduce nightmare
- From: Andy Smith <andy@strugglers.net>
Re: Is the new RAID implementation going to deprecate traditional stripes and mirrors?
- From: Ron Johnson <ron.l.johnson@cox.net>
Re: Is the new RAID implementation going to deprecate traditional stripes and mirrors?
- From: Alasdair G Kergon <agk@redhat.com>
Is the new RAID implementation going to deprecate traditional stripes and mirrors?
- From: ben <benscott@nwlink.com>
Re: lvreduce nightmare
- From: Stuart D Gathman <stuart@bmsi.com>
Re: lvreduce nightmare
- From: tariq wali <ganaiwali@gmail.com>
Re: [PATCH] mtd: sm_ftl: fix typo in major number.
- From: Artem Bityutskiy <dedekind1@gmail.com>
Re: [PATCH] mtd: sm_ftl: fix typo in major number.
- From: Alex Elsayed <eternaleye+usenet@gmail.com>
Re: lvreduce nightmare
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: lvreduce nightmare
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: lvreduce nightmare
- From: Andy Smith <andy@strugglers.net>
Re: lvreduce nightmare
- From: Stuart D Gathman <stuart@bmsi.com>
Re: lvreduce nightmare
- From: Ray Morris <support@bettercgi.com>
Can't create logical volume using lvm2app library
- From: Ruben Quinones <rq.sysadmin@gmail.com>
lvreduce nightmare
- From: tariq wali <ganaiwali@gmail.com>
Re: Device mapper does not really remove the references to removed LV.
- From: Germain Maurice <germain.maurice@linkfluence.net>
Re: Device mapper does not really remove the references to removed LV.
- From: Zdenek Kabelac <zkabelac@redhat.com>
Device mapper does not really remove the references to removed LV.
- From: Germain Maurice <gmaurice@linkfluence.net>
Re: project bugtracker and source
- From: Alasdair G Kergon <agk@redhat.com>
project bugtracker and source
- From: Andy Grover <agrover@redhat.com>
LVM: device-mapper: resume ioctl failed
- From: Venkata rama krishna Boddu <venkat.boddu@ymail.com>
Re: lvremove snapshot hangs LVM system
- From: Da <dcodix@gmail.com>
Re: Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Re: Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Erasing snapshot data from disk
- From: Greg Zapp <greg.zapp@gmail.com>
Re: Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Re: Missing PV
- From: Milan Broz <mbroz@redhat.com>
Re: Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Re: Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Re: Missing PV
- From: Milan Broz <mbroz@redhat.com>
Re: Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Re: Missing PV
- From: Milan Broz <mbroz@redhat.com>
Re: addtag
- From: Clay Gerrard <clay.gerrard@gmail.com>
Re: addtag
- From: Alasdair G Kergon <agk@redhat.com>
addtag
- From: Clay Gerrard <clay.gerrard@gmail.com>
Re: Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Re: lvremove snapshot hangs LVM system
- From: Ray Morris <support@bettercgi.com>
Re: lvremove snapshot hangs LVM system
- From: Da <dcodix@gmail.com>
Re: calculating size of metadata.
- From: Jan-Hendrik Palic <billgotchy@ki.tng.de>
Missing PV
- From: Brian McCullough <bdmc@bdmcc-us.com>
Re: calculating size of metadata.
- From: Ray Morris <support@bettercgi.com>
Re: calculating size of metadata.
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
calculating size of metadata.
- From: Jan-Hendrik Palic <billgotchy@ki.tng.de>
Encrypting an existing lvm pv (without much extra space)
- From: "Dr. David Alan Gilbert" <dave@treblig.org>
Re: Hide volume group during startup
- From: Erik Schwalbe <erik.schwalbe@canoo.com>
Re: Hide volume group during startup
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Hide volume group during startup
- From: Erik Schwalbe <erik.schwalbe@canoo.com>
Re: Hide volume group during startup
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Hide volume group during startup
- From: Erik Schwalbe <erik.schwalbe@canoo.com>
Re: Hide volume group during startup
- From: Erik Schwalbe <erik.schwalbe@canoo.com>
Re: Hide volume group during startup
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Hide volume group during startup
- From: Erik Schwalbe <erik.schwalbe@canoo.com>
Re: Hide volume group during startup
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: Hide volume group during startup
- From: "Bryn M. Reeves" <bmr@redhat.com>
Re: Hide volume group during startup
- From: Erik Schwalbe <erik.schwalbe@canoo.com>
Re: Hide volume group during startup
- From: "Bryn M. Reeves" <bmr@redhat.com>
Hide volume group during startup
- From: Erik Schwalbe <erik.schwalbe@canoo.com>
Re: Frozen root volume
- From: Ray Morris <support@bettercgi.com>
Re: Frozen root volume
- From: Larkin Lowrey <llowrey@nuclearwinter.com>
Re: Frozen root volume
- From: Ray Morris <support@bettercgi.com>
Frozen root volume
- From: Larkin Lowrey <llowrey@nuclearwinter.com>
lvremove snapshot hangs LVM system
- From: Dan C <dcodix@gmail.com>
Re: Removing snapshot often fails
- From: Peter Rajnoha <prajnoha@redhat.com>
Re: Removing snapshot often fails
- From: Danilo Godec <danilo.godec@agenda.si>
Re: Removing snapshot often fails
- From: Peter Rajnoha <prajnoha@redhat.com>
Removing snapshot often fails
- From: Danilo Godec <danilo.godec@agenda.si>
lvm + loopback
- From: Bali Zaci <zaci.bali@gmail.com>
Re: lvm + loopback
- From: Bali Zaci <zaci.bali@gmail.com>
Re: LVM commands extremely slow during raid check/resync
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM commands extremely slow during raid check/resync
- From: Ray Morris <support@bettercgi.com>
Re: LVM commands extremely slow during raid check/resync
- From: Stuart D Gathman <stuart@bmsi.com>
Re: LVM commands extremely slow during raid check/resync
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM commands extremely slow during raid check/resync
- From: Larkin Lowrey <llowrey@nuclearwinter.com>
Re: LVM commands extremely slow during raid check/resync
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM commands extremely slow during raid check/resync
- From: Ray Morris <support@bettercgi.com>
Re: LVM commands extremely slow during raid check/resync
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM commands extremely slow during raid check/resync
- From: Zdenek Kabelac <zkabelac@redhat.com>
Re: LVM commands extremely slow during raid check/resync
- From: Larkin Lowrey <llowrey@nuclearwinter.com>
Re: LVM commands extremely slow during raid check/resync
- From: Ray Morris <support@bettercgi.com>
Re: LVM commands extremely slow during raid check/resync
- From: Larkin Lowrey <llowrey@nuclearwinter.com>
Re: LVM commands extremely slow during raid check/resync
- From: James Candelaria <jc@whiptailtech.com>
LVM commands extremely slow during raid check/resync
- From: Larkin Lowrey <llowrey@nuclearwinter.com>
Re: Storage Virtualization and LVM
- From: Ray Morris <support@bettercgi.com>
Re: Corrupt PV (wrong size)
- From: Lars Ellenberg <lars.ellenberg@linbit.com>
Re: [PATCH] mtd: sm_ftl: fix typo in major number.
- From: Artem Bityutskiy <dedekind1@gmail.com>
Re: Corrupt PV (wrong size)
- From: Richard Petty <richard@nugnug.com>
Re: lvm fails when /proc/devices contains "-1 smblk"
- From: Zdenek Kabelac <zkabelac@redhat.com>
[PATCH] mtd: sm_ftl: fix typo in major number.
- From: Maxim Levitsky <maximlevitsky@gmail.com>
Re: lvm fails when /proc/devices contains "-1 smblk"
- From: Maxim Levitsky <maximlevitsky@gmail.com>
Re: lvm fails when /proc/devices contains "-1 smblk"
- From: Alasdair G Kergon <agk@redhat.com>
Re: lvm fails when /proc/devices contains "-1 smblk"
- From: Zdenek Kabelac <zdenek.kabelac@gmail.com>
lvm fails when /proc/devices contains "-1 smblk"
- From: John Mesmon <jmesmon@gmail.com>
Storage Virtualization and LVM
- From: Errol Neal <eneal@businessgrade.com>
Re: Does a striped LV honor the order of specified PVs
- From: "Peter M. Petrakis" <peter.petrakis@canonical.com>
Re: LVM Thin Provisioning size limited to 16 GiB?
- From: Zdenek Kabelac <zkabelac@redhat.com>