Re: [RFC V1 1/3] hwmon: da9063: HWMON driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lee,
Thank you for the fast reply.

On 24 March 2014 07:52 Lee Jones wrote,
>> From: Opensource [Steve Twiss] <stwiss.opensource@xxxxxxxxxxx>
>>
>> Add the HWMON driver for DA9063
>>
>> Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@xxxxxxxxxxx>
>> ---
>>
>>  drivers/hwmon/Kconfig                |   10 +
>>  drivers/hwmon/Makefile               |    1 +
>>  drivers/hwmon/da9063-hwmon.c         |  456
>++++++++++++++++++++++++++++++++++
>>  include/linux/mfd/da9063/registers.h |   34 +++
>
>I'd prefer to see all values in hex, but this probably a preference
>thing rather than something which would prevent acceptance.
>
>For the MFD header changes:
>  Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
>
Thanks for the Ack.

<snip>
> +#define DA9063_ADC_RES	(1 << (DA9063_ADC_RES_L_BITS + DA9063_ADC_RES_M_BITS))
> +#define DA9063_ADC_MAX	(DA9063_ADC_RES - 1)
>> +#define DA9063_2V5	2500
>> +#define DA9063_5V0	5000
>> +#define DA9063_5V5	5500
>> +#define DA9063_TJUNC_M	-420
>> +#define DA9063_TJUNC_C	-812
>> +#define DA9063_VBBAT_M	2048

I am using these defines as part of the base-10 calculations in the conversion
routines for voltage and temperature.
I guess they do look weird .. and looking at it, I have mixed  division by 1024
as a right shift 10 in the TJUNC calculation.

I will re-format that part and put a comment in the defines to explain.
Thanks.

<snip>
>> +	case DA9063_CHAN_ADCIN1:
>> +	case DA9063_CHAN_ADCIN2:
>> +	case DA9063_CHAN_ADCIN3:
>> +		val = (DA9063_2V5 * val) / DA9063_ADC_MAX;
>> +		break;
>> +	case DA9063_CHAN_VSYS:
>> +		val = ((DA9063_5V5 - DA9063_2V5) * val) / DA9063_ADC_MAX +
>> +			DA9063_2V5;
>> +		break;
>> +	case DA9063_CHAN_TJUNC:
>> +		val -= hwmon->tjunc_offset;
>> +		val = (DA9063_TJUNC_M * (val + DA9063_TJUNC_C)) >> 10;
>> +		break;
>> +	case DA9063_CHAN_VBBAT:
>> +		val = (DA9063_5V0 * val) / DA9063_ADC_MAX;
>> +		break;

<snip>
>
>--
>Lee Jones
>Linaro STMicroelectronics Landing Team Lead
>Linaro.org │ Open source software for ARM SoCs
>Follow Linaro: Facebook | Twitter | Blog

Regards,
Steve
_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors





[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux