Re: [PATCH] hwmon/sensors: fix SENSORS_LM75 dependencies

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07-01-2014 10:05, Zhang, Rui wrote:
> 
> 
>> -----Original Message-----
>> From: Eduardo Valentin [mailto:eduardo.valentin@xxxxxx]
>> Sent: Tuesday, January 07, 2014 8:24 PM
>> To: Jean Delvare
>> Cc: Guenter Roeck; Randy Dunlap; Stephen Rothwell; linux-
>> next@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Frodo Looijaard;
>> lm-sensors@xxxxxxxxxxxxxx; Zhang, Rui; Eduardo Valentin; linux-
>> pm@xxxxxxxxxxxxxxx
>> Subject: Re: [PATCH] hwmon/sensors: fix SENSORS_LM75 dependencies
>> Importance: High
>>
>> On 07-01-2014 08:04, Jean Delvare wrote:
>>> Hi Guenter, Randy,
>>>
>>> On Mon, 06 Jan 2014 18:26:34 -0800, Guenter Roeck wrote:
>>>> On 01/06/2014 05:09 PM, Randy Dunlap wrote:
>>>>> From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
>>>>>
>>>>> Fix SENSORS_LM75 dependencies to eliminate build errors:
>>>>>
>>>>> drivers/built-in.o: In function `lm75_remove':
>>>>> lm75.c:(.text+0x12bd8c): undefined reference to
>> `thermal_zone_of_sensor_unregister'
>>>>> drivers/built-in.o: In function `lm75_probe':
>>>>> lm75.c:(.text+0x12c123): undefined reference to
>> `thermal_zone_of_sensor_register'
>>>>>
>>>>> Add depends on THERMAL_OF since that is what provides the
>>>>> register/unregister functions above.
>>>>>
>>>>> Add depends on THERMAL since THERMAL is a tristate (while
>> THERMAL_OF
>>>>> is a bool) and SENSORS_LM75 (tristate) needs to be limited to
>>>>> modular builds when THERMAL=m.
>>>>>
>>>>> Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
>>>>> ---
>>>>>   drivers/hwmon/Kconfig |    2 ++
>>>>>   1 file changed, 2 insertions(+)
>>>>>
>>>>> --- linux-next-20140106.orig/drivers/hwmon/Kconfig
>>>>> +++ linux-next-20140106/drivers/hwmon/Kconfig
>>>>> @@ -650,6 +650,8 @@ config SENSORS_LM73
>>>>>   config SENSORS_LM75
>>>>>   	tristate "National Semiconductor LM75 and compatibles"
>>>>>   	depends on I2C
>>>>> +	depends on THERMAL
>>>>> +	depends on THERMAL_OF
>>>>>   	help
>>>>>   	  If you say yes here you get support for one common type
>> of
>>>>>   	  temperature sensor chip, with models including:
>>>>>
>>>>>
>>>> NACK. The driver does not and must not depend on THERMAL.
>>>
>>> Correct.
>>>
>>>> This needs to be addressed
>>>> in the thermal code, for example with dummy declarations if
>> THERMAL=m
>>>> but SENSORS_LM75=y. The functions are already declared as dummies if
>> THERMAL_OF=n.
>>>
>>> This won't fly I'm afraid, the number of hwmon drivers affected will
>>> grow in the future and you certainly don't want to have to change the
>>> generic thermal code every time a new driver is added/converted.
>>
>> Agreed
>>
>>>
>>> I've looked at the problem this morning and I will admit I do not
>> even
>>> understand what the problem is. In Randy's config,
>> CONFIG_THERMAL_OF=y
>>> so both thermal_zone_of_sensor_unregister and
>>> thermal_zone_of_sensor_register are built-in. SENSORS_LM75=y so the
>>> calls to these functions are built-in too. I just can't see how this
>>> can be a problem at link time. Can anyone enlighten me?
>>>
>>
>>
>> I believe the problem is more in the fact that THERMAL_OF is a bool,
>> but the way it is in thermal Kconfig, it will link to the thermal
>> module, in case CONFIG_THERMAL=m. Thus I am proposing the following,
>> which limits the user to have THERMAL_OF only as builtin and whenever
>> is selected, it will select THERMAL too. That is:
>>
>>
>> From b643aa260ed4f3514d1ca51b1ecbe4be7652a8d0 Mon Sep 17 00:00:00 2001
>> From: Eduardo Valentin <eduardo.valentin@xxxxxx>
>> Date: Tue, 7 Jan 2014 08:04:02 -0400
>> Subject: [PATCH 1/1] thermal: fix compilation issue on
>> CONFIG_THERMAL_OF  dependencies
>>
>> Users of API provided by THERMAL_OF config may suffer when
>> CONFIG_THERMAL=y, causing linking issues, such as:
>>
>> drivers/built-in.o: In function `lm75_remove':
>> lm75.c:(.text+0x12bd8c): undefined reference to
>> `thermal_zone_of_sensor_unregister'
>> drivers/built-in.o: In function `lm75_probe':
>> lm75.c:(.text+0x12c123): undefined reference to
>> `thermal_zone_of_sensor_register'
>>
>> Therefore, this patch limits the compilation build to always have
>> THERMAL=y, whenever THERMAL_OF=y. In this way, whenever the API user is
>> built, if THERMAL_OF=y, the build shall have the full thermal support,
>> otherwise, the thermal API will provide stubs.
>>
>> Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
>> Cc: linux-pm@xxxxxxxxxxxxxxx
>> Cc: linux-kernel@xxxxxxxxxxxxxxx
>> Signed-off-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
>> ---
>>  drivers/thermal/Kconfig | 29 ++++++++++++++++-------------
>>  1 file changed, 16 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
>> 58f98bd..dc315e9 100644
>> --- a/drivers/thermal/Kconfig
>> +++ b/drivers/thermal/Kconfig
>> @@ -29,19 +29,6 @@ config THERMAL_HWMON
>>  	  Say 'Y' here if you want all thermal sensors to
>>  	  have hwmon sysfs interface too.
>>
>> -config THERMAL_OF
>> -	bool
>> -	prompt "APIs to parse thermal data out of device tree"
>> -	depends on OF
>> -	default y
>> -	help
>> -	  This options provides helpers to add the support to
>> -	  read and parse thermal data definitions out of the
>> -	  device tree blob.
>> -
>> -	  Say 'Y' here if you need to build thermal infrastructure
>> -	  based on device tree.
>> -
>>  choice
>>  	prompt "Default Thermal governor"
>>  	default THERMAL_DEFAULT_GOV_STEP_WISE
>> @@ -235,3 +222,19 @@ source "drivers/thermal/samsung/Kconfig"
>>  endmenu
>>
>>  endif
>> +
>> +menuconfig THERMAL_OF
>> +	bool
>> +	prompt "APIs to parse thermal data out of device tree"
>> +	depends on OF
>> +	select THERMAL
>> +	default y
>> +	help
>> +	  This options enables DT thermal API which adds support to
>> +	  read and parse thermal data definitions out of the
>> +	  device tree blob. This option is mostly used by embedded
>> +	  thermal drivers.
>> +
>> +	  Say 'Y' here if you need to build thermal infrastructure
>> +	  based on device tree.
>> +
>> --
>> 1.8.2.1.342.gfa7285d
>>
>> Randy, can you please confirm if this fix the issue for you?
>>
> The patch looks good to me, will apply it after it has been verified to fix the problem.
> BTW, I've been thinking of make CONFIG_THERMAL a bool since long time ago, the only thing that blocks me is that Thermal subsystem needs to register a hwmon device for each thermal zone and CONFIG_HWMON is a tristate.
> 

I agree with the move of having CONFIG_THERMAL as bool. Unless you have
use cases where users are dynamically loading and unloading thermal per
user demand, which I doubt.

> Thanks,
> rui
>> --
>> You have got to be excited about what you are doing. (L. Lamport)
>>
>> Eduardo Valentin
> 
> 
> 


-- 
You have got to be excited about what you are doing. (L. Lamport)

Eduardo Valentin

Attachment: signature.asc
Description: OpenPGP digital signature

_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux