Re: [PATCH v4 1/3] hwmon: (lm90) Define status bits

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/31/2013 10:47 AM, Wei Ni wrote:
> On 10/30/2013 11:41 PM, Jean Delvare wrote:
>> Hi Wei,
>>
>> On Wed, 7 Aug 2013 14:18:24 +0800, Wei Ni wrote:
>>> Add bit defines for the status register. And add a function
>>> lm90_is_tripped() which will read status register and return
>>> tripped or not, then lm90_alert can call it directly, and in the
>>> future the IRQ thread also can use it.
>>>
>>> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
>>> ---
>>>  drivers/hwmon/lm90.c |   75 +++++++++++++++++++++++++++++++++-----------------
>>>  1 file changed, 50 insertions(+), 25 deletions(-)
>>>
>>> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
>>> index cdff742..1da2eff 100644
>>> --- a/drivers/hwmon/lm90.c
>>> +++ b/drivers/hwmon/lm90.c
>>> @@ -179,6 +179,18 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
>>>  #define LM90_HAVE_TEMP3		(1 << 6) /* 3rd temperature sensor	*/
>>>  #define LM90_HAVE_BROKEN_ALERT	(1 << 7) /* Broken alert		*/
>>>  
>>> +/* LM90 status */
>>> +#define LM90_STATUS_LTHRM	(1 << 0) /* local THERM limit tripped */
>>> +#define LM90_STATUS_RTHRM	(1 << 1) /* remote THERM limit tripped */
>>> +#define LM90_STATUS_OPEN	(1 << 2) /* remote is an open circuit */
>>> +#define LM90_STATUS_RLOW	(1 << 3) /* remote low temp limit tripped */
>>> +#define LM90_STATUS_RHIGH	(1 << 4) /* remote high temp limit tripped */
>>> +#define LM90_STATUS_LLOW	(1 << 5) /* local low temp limit tripped */
>>> +#define LM90_STATUS_LHIGH	(1 << 6) /* local high temp limit tripped */
>>> +
>>> +#define MAX6696_STATUS2_RLOW	(1 << 3) /* remote2 low temp limit tripped */
>>> +#define MAX6696_STATUS2_RHIGH	(1 << 4) /* remote2 high temp limit tripped */
>>> +
>>>  /*
>>>   * Driver data (common to all clients)
>>>   */
>>> @@ -1391,6 +1403,36 @@ static void lm90_init_client(struct i2c_client *client)
>>>  		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
>>>  }
>>>  
>>> +static bool lm90_is_tripped(struct i2c_client *client)
>>> +{
>>> +	struct lm90_data *data = i2c_get_clientdata(client);
>>> +	u8 status, status2 = 0;
>>> +
>>> +	lm90_read_reg(client, LM90_REG_R_STATUS, &status);
>>> +
>>> +	if (data->kind == max6696)
>>> +		lm90_read_reg(client, MAX6696_REG_R_STATUS2, &status2);
>>> +
>>> +	if ((status & 0x7f) == 0 && (status2 & 0xfe) == 0)
>>> +		return false;
>>> +
>>> +	if (status & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM))
>>> +		dev_warn(&client->dev,
>>> +			 "temp%d out of range, please check!\n", 1);
>>> +	if (status & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM))
>>> +		dev_warn(&client->dev,
>>> +			 "temp%d out of range, please check!\n", 2);
>>> +	if (status & LM90_STATUS_OPEN)
>>> +		dev_warn(&client->dev,
>>> +			 "temp%d diode open, please check!\n", 2);
>>> +
>>> +	if (status2 & (MAX6696_STATUS2_RLOW | MAX6696_STATUS2_RHIGH))
>>> +		dev_warn(&client->dev,
>>> +			 "temp%d out of range, please check!\n", 3);
>>> +
>>> +	return true;
>>> +}
>>> +
>>>  static int lm90_probe(struct i2c_client *client,
>>>  		      const struct i2c_device_id *id)
>>>  {
>>> @@ -1489,36 +1531,17 @@ static int lm90_remove(struct i2c_client *client)
>>>  
>>>  static void lm90_alert(struct i2c_client *client, unsigned int flag)
>>>  {
>>> -	struct lm90_data *data = i2c_get_clientdata(client);
>>> -	u8 config, alarms, alarms2 = 0;
>>> -
>>> -	lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
>>> -
>>> -	if (data->kind == max6696)
>>> -		lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms2);
>>> -
>>> -	if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) {
>>> -		dev_info(&client->dev, "Everything OK\n");
>>> -	} else {
>>> -		if (alarms & 0x61)
>>> -			dev_warn(&client->dev,
>>> -				 "temp%d out of range, please check!\n", 1);
>>> -		if (alarms & 0x1a)
>>> -			dev_warn(&client->dev,
>>> -				 "temp%d out of range, please check!\n", 2);
>>> -		if (alarms & 0x04)
>>> -			dev_warn(&client->dev,
>>> -				 "temp%d diode open, please check!\n", 2);
>>> -
>>> -		if (alarms2 & 0x18)
>>> -			dev_warn(&client->dev,
>>> -				 "temp%d out of range, please check!\n", 3);
>>> -
>>> +	if (lm90_is_tripped(client)) {
>>
>> You are reading LM90_REG_R_STATUS here...
>>
>>>  		/*
>>>  		 * Disable ALERT# output, because these chips don't implement
>>>  		 * SMBus alert correctly; they should only hold the alert line
>>>  		 * low briefly.
>>>  		 */
>>> +		struct lm90_data *data = i2c_get_clientdata(client);
>>> +		u8 config, alarms;
>>> +
>>> +		lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
>>
>> ... and here again. I already complained about this in my previous
>> review of this patch, and you were supposed to address it, but you did
>> not. As a result I am still not happy with this patch and I can't apply
>> it, sorry.
> 
> It's so sorry, I made a mistake, I sent a old patch for this. I will
> sent the right one right now.
> Sorry again.

Hi, Jean

I resend this patch:
[PATCH RESEND v4 1/3] hwmon: (lm90) Define status bits
Please review it.

Thanks.
Wei.

> 
> Wei.
> 
>>
>>> +
>>>  		if ((data->flags & LM90_HAVE_BROKEN_ALERT)
>>>  		 && (alarms & data->alert_alarms)) {
>>>  			dev_dbg(&client->dev, "Disabling ALERT#\n");
>>> @@ -1526,6 +1549,8 @@ static void lm90_alert(struct i2c_client *client, unsigned int flag)
>>>  			i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
>>>  						  config | 0x80);
>>>  		}
>>> +	} else {
>>> +		dev_info(&client->dev, "Everything OK\n");
>>>  	}
>>>  }
>>>  
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


_______________________________________________
lm-sensors mailing list
lm-sensors@xxxxxxxxxxxxxx
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors




[Index of Archives]     [Linux Kernel]     [Linux Hardware Monitoring]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux