Re: [PATCH] hwmon: Generic ADC support for hwmon
|[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]|
On 5/15/2012 3:18 PM, Lars-Peter Clausen wrote:
Thanks Lars-Peter. That bridge is currently limited to voltage reading but that's more because my test part didn't do anything else.On 05/15/2012 03:42 PM, Guenter Roeck wrote:On Tue, May 15, 2012 at 08:42:57AM -0400, R, Durgadoss wrote:Hi Guenter, Thanks for a quick reply.On Tue, May 15, 2012 at 10:26:48AM -0400, Jenny TC wrote:Currently drivers are using custom APIs to communicate with ADC driver. So it make sense to have generic APIs to commnicate with ADC drivers. This patch introduces generic APIs to communicate with ADC drivers. Signed-off-by: Jenny TC<jenny.tc@xxxxxxxxx>Hi Jenny, Do you have a practical use case ?We have some platform specific component drivers, thermal drivers, battery drivers using this General purpose ADC in the platform. That's why we thought of doing something like this.Also, shouldn't those generic ADCs rather be supported through the IO subsystem ? After all, hwmon is all about hardware monitoring, not to provide generic ADC access.In this case, can we try this in iio or mfd subsystem ? Kindly advise.I meant iio (more specifically staging/iio/adc). I suspect it might make more sense to have a hwmon client, in parallel to the other users/clients (battery control, thermal etc), if the values reported by the ADC reflect information relevant for hardware monitoring.So there is already an experimental IIO to hwmon bridge in drivers/staging/iio/, which you can use to expose a IIO ADC driver as an hwmon device.
Trivial to add other bits and bobs as needed. In the short term, theinterrupt driven side of things is still under review (so you are limited to polling devices - though this is typically fine for hwmon etc). I'll be submitting a patch to move the existing hwmon bridge driver into drivers/hwmon in the next cycle (after the IIO core is out of staging).
Longer term plans involve reducing the connection between the IIO userspace front end and the backend to give cleaner support when people don't want generic userspace interfaces. This means making absolutely everything under the sun available through generic in kernel interfaces which will be 'interesting' for some more interesting devices... Jonathan _______________________________________________ lm-sensors mailing list lm-sensors@xxxxxxxxxxxxxx http://lists.lm-sensors.org/mailman/listinfo/lm-sensors