[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH] [34/66] x86_64: Fix formatting in time.c



Only white space changes, code should be identical

Signed-off-by: Andi Kleen <ak@xxxxxxx>

---
 arch/x86_64/kernel/time.c |   92 ++++++++++++++++++++++------------------------
 1 files changed, 44 insertions(+), 48 deletions(-)

Index: linux/arch/x86_64/kernel/time.c
===================================================================
--- linux.orig/arch/x86_64/kernel/time.c
+++ linux/arch/x86_64/kernel/time.c
@@ -88,7 +88,8 @@ static inline unsigned int do_gettimeoff
 	unsigned long t;
 	unsigned long x;
 	t = get_cycles_sync();
-	if (t < vxtime.last_tsc) t = vxtime.last_tsc; /* hack */
+	if (t < vxtime.last_tsc) 
+		t = vxtime.last_tsc; /* hack */
 	x = ((t - vxtime.last_tsc) * vxtime.tsc_quot) >> 32;
 	return x;
 }
@@ -178,8 +179,9 @@ unsigned long profile_pc(struct pt_regs 
 {
 	unsigned long pc = instruction_pointer(regs);
 
-	/* Assume the lock function has either no stack frame or only a single word.
-	   This checks if the address on the stack looks like a kernel text address.
+	/* Assume the lock function has either no stack frame or only a single 
+	   word.  This checks if the address on the stack looks like a kernel 
+	   text address.
 	   There is a small window for false hits, but in that case the tick
 	   is just accounted to the spinlock function.
 	   Better would be to write these functions in assembler again
@@ -293,8 +295,7 @@ unsigned long long monotonic_clock(void)
 			this_offset = hpet_readl(HPET_COUNTER);
 		} while (read_seqretry(&xtime_lock, seq));
 		offset = (this_offset - last_offset);
-		offset *=(NSEC_PER_SEC/HZ)/hpet_tick;
-		return base + offset;
+		offset *= (NSEC_PER_SEC/HZ) / hpet_tick;
 	} else {
 		do {
 			seq = read_seqbegin(&xtime_lock);
@@ -303,50 +304,46 @@ unsigned long long monotonic_clock(void)
 			base = monotonic_base;
 		} while (read_seqretry(&xtime_lock, seq));
 		this_offset = get_cycles_sync();
-		offset = (this_offset - last_offset)*1000/cpu_khz; 
-		return base + offset;
+		offset = (this_offset - last_offset)*1000 / cpu_khz; 
 	}
+	return base + offset;
 }
 EXPORT_SYMBOL(monotonic_clock);
 
 static noinline void handle_lost_ticks(int lost, struct pt_regs *regs)
 {
-    static long lost_count;
-    static int warned;
+	static long lost_count;
+	static int warned;
+	if (report_lost_ticks) {
+		printk(KERN_WARNING "time.c: Lost %d timer tick(s)! ", lost);
+		print_symbol("rip %s)\n", regs->rip);
+	}
 
-    if (report_lost_ticks) {
-	    printk(KERN_WARNING "time.c: Lost %d timer "
-		   "tick(s)! ", lost);
-	    print_symbol("rip %s)\n", regs->rip);
-    }
-
-    if (lost_count == 1000 && !warned) {
-	    printk(KERN_WARNING
-		   "warning: many lost ticks.\n"
-		   KERN_WARNING "Your time source seems to be instable or "
+	if (lost_count == 1000 && !warned) {
+		printk(KERN_WARNING "warning: many lost ticks.\n"
+		       KERN_WARNING "Your time source seems to be instable or "
 		   		"some driver is hogging interupts\n");
-	    print_symbol("rip %s\n", regs->rip);
-	    if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) {
-		    printk(KERN_WARNING "Falling back to HPET\n");
-		    if (hpet_use_timer)
-		    	vxtime.last = hpet_readl(HPET_T0_CMP) - hpet_tick;
-		    else
-		    	vxtime.last = hpet_readl(HPET_COUNTER);
-		    vxtime.mode = VXTIME_HPET;
-		    do_gettimeoffset = do_gettimeoffset_hpet;
-	    }
-	    /* else should fall back to PIT, but code missing. */
-	    warned = 1;
-    } else
-	    lost_count++;
+		print_symbol("rip %s\n", regs->rip);
+		if (vxtime.mode == VXTIME_TSC && vxtime.hpet_address) {
+			printk(KERN_WARNING "Falling back to HPET\n");
+			if (hpet_use_timer)
+				vxtime.last = hpet_readl(HPET_T0_CMP) - 
+							hpet_tick;
+			else
+				vxtime.last = hpet_readl(HPET_COUNTER);
+			vxtime.mode = VXTIME_HPET;
+			do_gettimeoffset = do_gettimeoffset_hpet;
+		}
+		/* else should fall back to PIT, but code missing. */
+		warned = 1;
+	} else
+		lost_count++;
 
 #ifdef CONFIG_CPU_FREQ
-    /* In some cases the CPU can change frequency without us noticing
-       (like going into thermal throttle)
-       Give cpufreq a change to catch up. */
-    if ((lost_count+1) % 25 == 0) {
-	    cpufreq_delayed_get();
-    }
+	/* In some cases the CPU can change frequency without us noticing
+	   Give cpufreq a change to catch up. */
+	if ((lost_count+1) % 25 == 0)
+		cpufreq_delayed_get();
 #endif
 }
 
@@ -556,7 +553,7 @@ static unsigned long get_cmos_time(void)
 	/*
 	 * We know that x86-64 always uses BCD format, no need to check the
 	 * config register.
- 	*/
+ 	 */
 
 	BCD_TO_BIN(sec);
 	BCD_TO_BIN(min);
@@ -618,7 +615,8 @@ static void cpufreq_delayed_get(void)
 		cpufreq_delayed_issched = 1;
 		if (!warned) {
 			warned = 1;
-			printk(KERN_DEBUG "Losing some ticks... checking if CPU frequency changed.\n");
+			printk(KERN_DEBUG 
+	"Losing some ticks... checking if CPU frequency changed.\n");
 		}
 		schedule_work(&cpufreq_delayed_get_work);
 	}
@@ -641,9 +639,9 @@ static int time_cpufreq_notifier(struct 
 	lpj = &dummy;
 	if (!(freq->flags & CPUFREQ_CONST_LOOPS))
 #ifdef CONFIG_SMP
-	lpj = &cpu_data[freq->cpu].loops_per_jiffy;
+		lpj = &cpu_data[freq->cpu].loops_per_jiffy;
 #else
-	lpj = &boot_cpu_data.loops_per_jiffy;
+		lpj = &boot_cpu_data.loops_per_jiffy;
 #endif
 
 	if (!ref_freq) {
@@ -780,9 +778,8 @@ static __init int late_hpet_init(void)
 		int			i;
 
 		hpet = (struct hpet *) fix_to_virt(FIX_HPET_BASE);
-
-		for (i = 2, timer = &hpet->hpet_timers[2]; i < ntimer;
-		     timer++, i++)
+		timer = &hpet->hpet_timers[2];
+		for (i = 2; i < ntimer; timer++, i++)
 			hd.hd_irq[i] = (timer->hpet_config &
 					Tn_INT_ROUTE_CNF_MASK) >>
 				Tn_INT_ROUTE_CNF_SHIFT;
@@ -939,8 +936,7 @@ void __init time_init(void)
 	                        -xtime.tv_sec, -xtime.tv_nsec);
 
 	if (!hpet_init())
-                vxtime_hz = (1000000000000000L + hpet_period / 2) /
-			hpet_period;
+                vxtime_hz = (1000000000000000L + hpet_period / 2) / hpet_period;
 	else
 		vxtime.hpet_address = 0;
 
-
: send the line "unsubscribe linux-x86_64" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Linux ia64]     [Linux Kernel]     [DCCP]     [Linux ARM]     [Linux]     [Photo]     [Yosemite News]     [Linux SCSI]     [Linux Hams]

Add to Google Powered by Linux