Search Linux Wireless

[PATCH 60g v1 5/5] wireless: bitrate calculation for 60g

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


60g band uses different from .11n MCS scheme, so bitrate should be calculated
differently

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@xxxxxxxxxxxxxxxx>
---
 include/net/cfg80211.h |    2 ++
 net/wireless/util.c    |   55 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 57 insertions(+)

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 56e840d..f760520 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -563,11 +563,13 @@ enum station_info_flags {
  * @RATE_INFO_FLAGS_MCS: @tx_bitrate_mcs filled
  * @RATE_INFO_FLAGS_40_MHZ_WIDTH: 40 Mhz width transmission
  * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
+ * @RATE_INFO_FLAGS_60G: 60gHz MCS
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS		= 1<<0,
 	RATE_INFO_FLAGS_40_MHZ_WIDTH	= 1<<1,
 	RATE_INFO_FLAGS_SHORT_GI	= 1<<2,
+	RATE_INFO_FLAGS_60G		= 1<<3,
 };
 
 /**
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 11188c6..130eaed 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -890,12 +890,67 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 	return err;
 }
 
+static u16 cfg80211_calculate_bitrate_60g(struct rate_info *rate)
+{
+	static const u16 __mcs2bitrate[] = {
+		/* control PHY */
+		[0] =   275,
+		/* SC PHY */
+		[1] =  3850,
+		[2] =  7700,
+		[3] =  9625,
+		[4] = 11550,
+		[5] = 12512, /* 1251.25 mbps */
+		[6] = 15400,
+		[7] = 19250,
+		[8] = 23100,
+		[9] = 25025,
+		[10] = 30800,
+		[11] = 38500,
+		[12] = 46200,
+		/* OFDM PHY */
+		[13] =  6930,
+		[14] =  8662, /* 866.25 mbps */
+		[15] = 13860,
+		[16] = 17325,
+		[17] = 20790,
+		[18] = 27720,
+		[19] = 34650,
+		[20] = 41580,
+		[21] = 45045,
+		[22] = 51975,
+		[23] = 62370,
+#if 0
+		/*
+		 * TODO: How to report this bitrate?
+		 * It don't fit into u16
+		 */
+		[24] = 67568, /* 6756.75 mbps */
+#endif
+		/* LP-SC PHY */
+		[25] =  6260,
+		[26] =  8340,
+		[27] = 11120,
+		[28] = 12510,
+		[29] = 16680,
+		[30] = 22240,
+		[31] = 25030,
+	};
+
+	if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate)))
+		return 0;
+
+	return __mcs2bitrate[rate->mcs];
+}
+
 u16 cfg80211_calculate_bitrate(struct rate_info *rate)
 {
 	int modulation, streams, bitrate;
 
 	if (!(rate->flags & RATE_INFO_FLAGS_MCS))
 		return rate->legacy;
+	if (rate->flags & RATE_INFO_FLAGS_60G)
+		return cfg80211_calculate_bitrate_60g(rate);
 
 	/* the formula below does only work for MCS values smaller than 32 */
 	if (WARN_ON_ONCE(rate->mcs >= 32))
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux Kernel]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]     [Free Dating]     [M2M Wireless]

Add to Google Powered by Linux