[PATCH 1/5] ath9k_hw: start noisefloor calibration after MCI reset

[Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>]

noisefloor calibration has to be loaded and started after
chip reset completion and restoring chainmask. Right now it is
being started before MCI reset completion on full reset. Fix that.

Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/hw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ebfb2a3..10a55bc 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -1949,9 +1949,6 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (!ath9k_hw_init_cal(ah, chan))
 		return -EIO;
 
-	ath9k_hw_loadnf(ah, chan);
-	ath9k_hw_start_nfcal(ah, true);
-
 	if (ath9k_hw_mci_is_enabled(ah) && ar9003_mci_end_reset(ah, chan, caldata))
 		return -EIO;
 
@@ -2000,6 +1997,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (ath9k_hw_mci_is_enabled(ah))
 		ar9003_mci_check_bt(ah);
 
+	ath9k_hw_loadnf(ah, chan);
+	ath9k_hw_start_nfcal(ah, true);
+
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		ar9003_hw_bb_watchdog_config(ah);
 
-- 
1.7.11.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html