Search Linux Wireless

Re: [ath9k-devel] [RFC] ath9k: Fix softlockup in AR9485

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


On Thursday 31 May 2012 11:11 AM, Sujith Manoharan wrote:
Mohammed Shafi Shajakhan wrote:
should we check  if (work_pending(&sc->hw_reset_work)) like we do in
ath_beacon_tasklet in all the other work routine that access hardware
registers in case the hw_reset_work is not cancelled(possible in
ath_set_channel)

Probably, but this needs to be done in a clean manner.

ok.


don't know, i put a printk to see the routine seems to get executed for
every 200ms(HZ/5). scan work in mac80211 seems to use HZ
ieee80211_queue_delayed_work(&local->hw,&local->scan_work, next_delay);

HZ can be configured to a user-defined value, so we need to make sure
that the timing for the PLL work is what we want.

ok, then we will change it.


Sujith


--
thanks,
shafi
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux Kernel]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]     [Free Dating]     [M2M Wireless]

Add to Google Powered by Linux