[PATCH] ath6kl: issue wmi disconnect after notifying cfg80211

[Thomas Pedersen <c_tpeder@xxxxxxxxxxxxxxxx>]

ath6kl would issue a wmi disconnect command in response to a remote
disconnect and return early without notifying cfg80211, only sending a
cfg80211_disconnected (with reason code always 3) in response to the
second disconnect firmware event.

Pass the right reason code to cfg80211 on the first disconnect instead.

Signed-off-by: Thomas Pedersen <c_tpeder@xxxxxxxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |   27 ++++++++++++---------------
 1 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index f3a6cfc..7845d33 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -860,20 +860,6 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 		}
 	}
 
-	/*
-	 * Send a disconnect command to target when a disconnect event is
-	 * received with reason code other than 3 (DISCONNECT_CMD - disconnect
-	 * request from host) to make the firmware stop trying to connect even
-	 * after giving disconnect event. There will be one more disconnect
-	 * event for this disconnect command with reason code DISCONNECT_CMD
-	 * which will be notified to cfg80211.
-	 */
-
-	if (reason != DISCONNECT_CMD) {
-		ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
-		return;
-	}
-
 	clear_bit(CONNECT_PEND, &vif->flags);
 
 	if (vif->sme_state == SME_CONNECTING) {
@@ -883,11 +869,22 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 					WLAN_STATUS_UNSPECIFIED_FAILURE,
 					GFP_KERNEL);
 	} else if (vif->sme_state == SME_CONNECTED) {
-		cfg80211_disconnected(vif->ndev, reason,
+		cfg80211_disconnected(vif->ndev, proto_reason,
 				      NULL, 0, GFP_KERNEL);
 	}
 
 	vif->sme_state = SME_DISCONNECTED;
+
+	/*
+	 * Send a disconnect command to target when a disconnect event is
+	 * received with reason code other than 3 (DISCONNECT_CMD - disconnect
+	 * request from host) to make the firmware stop trying to connect even
+	 * after giving disconnect event. There will be one more disconnect
+	 * event for this disconnect command with reason code DISCONNECT_CMD
+	 * which won't be notified to cfg80211.
+	 */
+	if (reason != DISCONNECT_CMD)
+		ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
 }
 
 static int ath6kl_set_probed_ssids(struct ath6kl *ar,
-- 
1.7.4.1

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html