Search Linux Wireless

Re: After Kernel 3.3, brcmsmac won't work on mid-2010 Mac Mini

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


Arend,

Strangely, when I rebooted the box under 3.3.5 this time, the WiFi worked!
I will post again if it drops out.

For reference, here are the files you requested.

- brent


Arend van Spriel wrote:
On 05/10/2012 02:38 AM, Brent Roman wrote:
Thanks for the quick response.

I've not blacklisted bcma for either 3.2 or 3.3 kernels.
Yes, I built the kernels myself.  The mac mini runs a Debian Mint 11.
The brcmsmac driver in 3.3 seems to have dependencies on bcma, It won't
load without it.
When I reverte to 3.2.16, I just unconfigured the bcma driver, so it
never built.
the kernel .config for 3.2 and 3.3 are attached.
Let me know if you need me to reboot the box with the 3.3 kernel and
post dmesg or other logs.

- brent


The kernel configurations you sent me look fine. I noticed you have
debugging enabled for bcma and brcmsmac so can you sent me a dmesg for
the 3.3 kernel. lspci should show bcma as the driver for the device.
Unfortunately, there is no lsbcma.

Gr. AvS



[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.3.5-mpc89mac4gb-gcc4.6 (brent@pippin) (gcc version 4.6.1 (Debian 4.6.1-4) ) #5 SMP Mon May 7 18:12:50 PDT 2012
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[    0.000000]  BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[    0.000000]  BIOS-e820: 0000000000090000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000af000000 (usable)
[    0.000000]  BIOS-e820: 00000000af000000 - 00000000bf000000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf000000 - 00000000bf70f000 (usable)
[    0.000000]  BIOS-e820: 00000000bf70f000 - 00000000bf930000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf930000 - 00000000bf931000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf931000 - 00000000bf939000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf939000 - 00000000bfef9000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[    0.000000]  BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000d3500000 - 00000000d3501000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] DMI 2.4 present.
[    0.000000] DMI: Apple Inc. Macmini4,1/Mac-F2208EC8, BIOS     MM41.88Z.0042.B00.1004221740 04/22/10
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xbf70f max_arch_pfn = 0x100000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01800000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
[    0.000000] ACPI: XSDT bf96a1c0 00084 (v01 APPLE   Apple00 00000042      01000013)
[    0.000000] ACPI: FACP bf968000 000F4 (v04 APPLE   Apple00 00000042 Loki 0000005F)
[    0.000000] ACPI: DSDT bf95b000 054A1 (v01 APPLE   Macmini 00040001 INTL 20061109)
[    0.000000] ACPI: FACS bf71e000 00040
[    0.000000] ACPI: HPET bf967000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: APIC bf966000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: APIC bf965000 00068 (v02 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ASF! bf963000 000A5 (v32 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SBST bf962000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT bf961000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT bf957000 00024 (v01 APPLE     Apple 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT bf956000 004DC (v01  APPLE    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: MCFG bf964000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT bf95a000 000A5 (v01 SataRe  SataPri 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT bf959000 0009F (v01 SataRe  SataSec 00001000 INTL 20061109)
[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 2175MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x000bf70f
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000008f
[    0.000000]     0: 0x00000090 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000af000
[    0.000000]     0: 0x000bf000 -> 0x000bf70f
[    0.000000] On node 0 totalpages: 718493
[    0.000000] free_area_init_node: node 0, pgdat c13f4940, node_mem_map f600d200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3950 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 4351 pages used for memmap
[    0.000000]   HighMem zone: 486930 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at d3501000 (gap: d3501000:1caff000)
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 11 pages/cpu @f5800000 s24384 r0 d20672 u2097152
[    0.000000] pcpu-alloc: s24384 r0 d20672 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 712366
[    0.000000] Kernel command line: BOOT_IMAGE=debMintTxt4gNew ro root=804 reboot=pci resume=/dev/sda5 single
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Initializing HighMem for node 0 (000377fe:000bf70f)
[    0.000000] Memory: 2843788k/3136572k available (2845k kernel code, 30184k reserved, 1223k data, 308k init, 1965124k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff67000 - 0xfffff000   ( 608 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc13fa000 - 0xc1447000   ( 308 kB)
[    0.000000]       .data : 0xc12c779b - 0xc13f94c0   (1223 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c779b   (2845 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2389.177 MHz processor.
[    0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4778.35 BogoMIPS (lpj=9556708)
[    0.004137] pid_max: default: 32768 minimum: 301
[    0.004230] Mount-cache hash table entries: 512
[    0.008014] Initializing cgroup subsys cpuacct
[    0.008080] Initializing cgroup subsys devices
[    0.008145] Initializing cgroup subsys freezer
[    0.008211] Initializing cgroup subsys net_cls
[    0.008292] CPU: Physical Processor ID: 0
[    0.008355] CPU: Processor Core ID: 0
[    0.008420] mce: CPU supports 6 MCE banks
[    0.008489] CPU0: Thermal monitoring enabled (TM2)
[    0.008556] using mwait in idle threads.
[    0.008678] ACPI: Core revision 20120111
[    0.012566] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.013089] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052849] CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz stepping 0a
[    0.056003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.056003] ... version:                2
[    0.056003] ... bit width:              40
[    0.056003] ... generic registers:      2
[    0.056003] ... value mask:             000000ffffffffff
[    0.056003] ... max period:             000000007fffffff
[    0.056003] ... fixed-purpose events:   3
[    0.056003] ... event mask:             0000000700000003
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] CPU 1 irqstacks, hard=f54a0000 soft=f54a2000
[    0.056003] Booting Node   0, Processors  #1 Ok.
[    0.056003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.068026] NMI watchdog enabled, takes one hw-pmu counter.
[    0.068179] Brought up 2 CPUs
[    0.068242] Total of 2 processors activated (9556.70 BogoMIPS).
[    0.070013] devtmpfs: initialized
[    0.070013] PM: Registering ACPI NVS region at bf70f000 (2232320 bytes)
[    0.070013] PM: Registering ACPI NVS region at bf931000 (32768 bytes)
[    0.070013] NET: Registered protocol family 16
[    0.070013] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.070013] ACPI: bus type pci registered
[    0.070013] PCI: MMCONFIG for domain 0000 [bus 00-05] at [mem 0xf0000000-0xf05fffff] (base 0xf0000000)
[    0.070013] PCI: MMCONFIG at [mem 0xf0000000-0xf05fffff] reserved in E820
[    0.070013] PCI: Using MMCONFIG for extended config space
[    0.070013] PCI: Using configuration type 1 for base access
[    0.072040] bio: create slab <bio-0> at 0
[    0.072103] ACPI: Added _OSI(Module Device)
[    0.072103] ACPI: Added _OSI(Processor Device)
[    0.072164] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.072230] ACPI: Added _OSI(Processor Aggregator Device)
[    0.073380] ACPI: EC: EC description table is found, configuring boot EC
[    0.080664] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.081025] ACPI: SSDT bf71dc98 00238 (v01  APPLE  Cpu0Ist 00003000 INTL 20061109)
[    0.081426] ACPI: Dynamic OEM Table Load:
[    0.081565] ACPI: SSDT   (null) 00238 (v01  APPLE  Cpu0Ist 00003000 INTL 20061109)
[    0.081845] ACPI: SSDT bf71c618 005A6 (v01  APPLE  Cpu0Cst 00003001 INTL 20061109)
[    0.082233] ACPI: Dynamic OEM Table Load:
[    0.082371] ACPI: SSDT   (null) 005A6 (v01  APPLE  Cpu0Cst 00003001 INTL 20061109)
[    0.082545] ACPI: SSDT bf71df18 000C8 (v01  APPLE  Cpu1Ist 00003000 INTL 20061109)
[    0.082545] ACPI: Dynamic OEM Table Load:
[    0.082545] ACPI: SSDT   (null) 000C8 (v01  APPLE  Cpu1Ist 00003000 INTL 20061109)
[    0.082545] ACPI: SSDT bf71bf18 00085 (v01  APPLE  Cpu1Cst 00003000 INTL 20061109)
[    0.082545] ACPI: Dynamic OEM Table Load:
[    0.084060] ACPI: SSDT   (null) 00085 (v01  APPLE  Cpu1Cst 00003000 INTL 20061109)
[    0.084233] ACPI: Interpreter enabled
[    0.084233] ACPI: (supports S0 S3 S4 S5)
[    0.084460] ACPI: Using IOAPIC for interrupt routing
[    0.089130] ACPI: EC: GPE = 0x57, I/O: command/status = 0x66, data = 0x62
[    0.089220] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.089438] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.089583] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.089654] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.089725] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.089814] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.089904] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.089993] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.090082] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.090172] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.090261] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.090350] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.090439] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.090529] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.090618] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.090707] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.090797] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.090886] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[    0.090975] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[    0.091094] PCI host bridge to bus 0000:00
[    0.091159] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.091228] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.091298] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.091369] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[    0.091440] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[    0.091511] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[    0.091582] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[    0.091653] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.091724] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.091795] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.091867] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[    0.091938] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[    0.092007] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[    0.092078] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[    0.092149] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[    0.092220] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[    0.092291] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.092377] pci 0000:00:00.0: [10de:0d60] type 0 class 0x000600
[    0.092491] pci 0000:00:00.1: [10de:0d68] type 0 class 0x000500
[    0.092661] pci 0000:00:01.0: [10de:0d6d] type 0 class 0x000500
[    0.092824] pci 0000:00:01.1: [10de:0d6e] type 0 class 0x000500
[    0.092987] pci 0000:00:01.2: [10de:0d6f] type 0 class 0x000500
[    0.093150] pci 0000:00:01.3: [10de:0d70] type 0 class 0x000500
[    0.093318] pci 0000:00:02.0: [10de:0d71] type 0 class 0x000500
[    0.093481] pci 0000:00:02.1: [10de:0d72] type 0 class 0x000500
[    0.093643] pci 0000:00:03.0: [10de:0d80] type 0 class 0x000601
[    0.093652] pci 0000:00:03.0: reg 10: [io  0x2100-0x21ff]
[    0.093697] pci 0000:00:03.1: [10de:0d7b] type 0 class 0x000500
[    0.093779] pci 0000:00:03.2: [10de:0d79] type 0 class 0x000c05
[    0.093793] pci 0000:00:03.2: reg 10: [io  0x0000-0x00ff]
[    0.093815] pci 0000:00:03.2: reg 20: [io  0x2240-0x227f]
[    0.093821] pci 0000:00:03.2: reg 24: [io  0x2200-0x223f]
[    0.093856] pci 0000:00:03.2: PME# supported from D3hot D3cold
[    0.093883] pci 0000:00:03.3: [10de:0d69] type 0 class 0x000500
[    0.094087] pci 0000:00:03.4: [10de:0d7a] type 0 class 0x000b40
[    0.094107] pci 0000:00:03.4: reg 10: [mem 0xd3500000-0xd357ffff]
[    0.094249] pci 0000:00:04.0: [10de:0d9c] type 0 class 0x000c03
[    0.094261] pci 0000:00:04.0: reg 10: [mem 0xd358a000-0xd358afff]
[    0.094309] pci 0000:00:04.0: supports D1 D2
[    0.094311] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094326] pci 0000:00:04.1: [10de:0d9d] type 0 class 0x000c03
[    0.094340] pci 0000:00:04.1: reg 10: [mem 0xd358b100-0xd358b1ff]
[    0.094397] pci 0000:00:04.1: supports D1 D2
[    0.094399] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094422] pci 0000:00:06.0: [10de:0d9c] type 0 class 0x000c03
[    0.094433] pci 0000:00:06.0: reg 10: [mem 0xd3589000-0xd3589fff]
[    0.094481] pci 0000:00:06.0: supports D1 D2
[    0.094483] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094499] pci 0000:00:06.1: [10de:0d9d] type 0 class 0x000c03
[    0.094512] pci 0000:00:06.1: reg 10: [mem 0xd358b000-0xd358b0ff]
[    0.094569] pci 0000:00:06.1: supports D1 D2
[    0.094571] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094600] pci 0000:00:08.0: [10de:0d94] type 0 class 0x000403
[    0.094614] pci 0000:00:08.0: reg 10: [mem 0xd3580000-0xd3583fff]
[    0.094673] pci 0000:00:08.0: PME# supported from D3hot D3cold
[    0.094692] pci 0000:00:0a.0: [10de:0d85] type 0 class 0x000101
[    0.094704] pci 0000:00:0a.0: reg 10: [io  0x2298-0x229f]
[    0.094710] pci 0000:00:0a.0: reg 14: [io  0x22a4-0x22a7]
[    0.094715] pci 0000:00:0a.0: reg 18: [io  0x2290-0x2297]
[    0.094721] pci 0000:00:0a.0: reg 1c: [io  0x22a0-0x22a3]
[    0.094727] pci 0000:00:0a.0: reg 20: [io  0x2280-0x228f]
[    0.094733] pci 0000:00:0a.0: reg 24: [mem 0xd3584000-0xd3585fff]
[    0.094776] pci 0000:00:0b.0: [10de:0d75] type 0 class 0x000500
[    0.094789] pci 0000:00:0b.0: reg 10: [mem 0xd3588000-0xd3588fff]
[    0.094905] pci 0000:00:0e.0: [10de:0d9a] type 1 class 0x000604
[    0.095172] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095285] pci 0000:00:15.0: [10de:0d9b] type 1 class 0x000604
[    0.095552] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095658] pci 0000:00:16.0: [10de:0d9b] type 1 class 0x000604
[    0.095924] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.095983] pci 0000:00:17.0: [10de:0d76] type 1 class 0x000604
[    0.096043] pci 0000:00:17.0: PME# supported from D0 D3hot D3cold
[    0.096255] pci 0000:01:00.0: [104c:823e] type 1 class 0x000604
[    0.096362] pci 0000:01:00.0: supports D1 D2
[    0.104025] pci 0000:00:0e.0: PCI bridge to [bus 01-02]
[    0.104113] pci 0000:00:0e.0:   bridge window [mem 0xd3400000-0xd34fffff]
[    0.104205] pci 0000:02:00.0: [104c:823f] type 0 class 0x000c00
[    0.104228] pci 0000:02:00.0: reg 10: [mem 0xd3404000-0xd34047ff]
[    0.104242] pci 0000:02:00.0: reg 14: [mem 0xd3400000-0xd3403fff]
[    0.104336] pci 0000:02:00.0: supports D1 D2
[    0.104338] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.104399] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[    0.104475] pci 0000:01:00.0:   bridge window [mem 0xd3400000-0xd34fffff]
[    0.104715] pci 0000:03:00.0: [14e4:4353] type 0 class 0x000280
[    0.104735] pci 0000:03:00.0: reg 10: [mem 0xd3300000-0xd3303fff 64bit]
[    0.104836] pci 0000:03:00.0: supports D1 D2
[    0.104837] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.104896] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.104983] pci 0000:00:15.0:   bridge window [mem 0xd3300000-0xd33fffff]
[    0.105194] pci 0000:04:00.0: [14e4:16b4] type 0 class 0x000200
[    0.105214] pci 0000:04:00.0: reg 10: [mem 0xd3100000-0xd310ffff 64bit pref]
[    0.105231] pci 0000:04:00.0: reg 18: [mem 0xd3110000-0xd311ffff 64bit pref]
[    0.105315] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.105358] pci 0000:04:00.1: [14e4:16bc] type 0 class 0x000805
[    0.105379] pci 0000:04:00.1: reg 10: [mem 0xd3120000-0xd312ffff 64bit pref]
[    0.105474] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[    0.112029] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[    0.112117] pci 0000:00:16.0:   bridge window [mem 0xd3200000-0xd32fffff]
[    0.112132] pci 0000:00:16.0:   bridge window [mem 0xd3100000-0xd31fffff 64bit pref]
[    0.112166] pci 0000:05:00.0: [10de:08a4] type 0 class 0x000300
[    0.112178] pci 0000:05:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[    0.112186] pci 0000:05:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.112195] pci 0000:05:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.112201] pci 0000:05:00.0: reg 24: [io  0x1000-0x107f]
[    0.112207] pci 0000:05:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[    0.112253] pci 0000:00:17.0: PCI bridge to [bus 05-05]
[    0.112322] pci 0000:00:17.0:   bridge window [io  0x1000-0x1fff]
[    0.112325] pci 0000:00:17.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.112330] pci 0000:00:17.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.112373] pci_bus 0000:00: on NUMA node 0
[    0.112377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.112602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[    0.112710]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.112917]  pci0000:00: ACPI _OSC control (0x1d) granted
[    0.131446] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.132066] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.132676] ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.133282] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.133888] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.134494] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.135101] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.135707] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.136303] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.136909] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.137516] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.138122] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.138729] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *11
[    0.139297] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.139903] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.140530] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.141136] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[    0.141703] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[    0.142270] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[    0.142842] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.143448] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[    0.144038] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *5
[    0.144588] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[    0.145194] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[    0.145765] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[    0.146318] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[    0.146872] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[    0.147413] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.147413] vgaarb: loaded
[    0.147413] vgaarb: bridge control possible 0000:05:00.0
[    0.147413] SCSI subsystem initialized
[    0.147413] libata version 3.00 loaded.
[    0.147413] usbcore: registered new interface driver usbfs
[    0.147413] usbcore: registered new interface driver hub
[    0.148017] usbcore: registered new device driver usb
[    0.148113] PCI: Using ACPI for IRQ routing
[    0.148179] PCI: pci_cache_line_size set to 64 bytes
[    0.148325] reserve RAM buffer: 000000000008f000 - 000000000008ffff 
[    0.148327] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.148329] reserve RAM buffer: 00000000af000000 - 00000000afffffff 
[    0.148331] reserve RAM buffer: 00000000bf70f000 - 00000000bfffffff 
[    0.148420] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.148497] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[    0.148751] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[    0.152024] Switching to clocksource hpet
[    0.152123] pnp: PnP ACPI init
[    0.152191] ACPI: bus type pnp registered
[    0.152314] pnp 00:00: [bus 00-ff]
[    0.152316] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.152318] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.152321] pnp 00:00: [io  0x0d00-0xffff window]
[    0.152323] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.152325] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.152327] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.152329] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.152331] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.152333] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.152335] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.152337] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.152339] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.152341] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.152343] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.152345] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.152347] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.152349] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.152351] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[    0.152392] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.152410] pnp 00:01: [mem 0x00000000-0xffffffff disabled]
[    0.152412] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
[    0.152450] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.152522] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.152533] pnp 00:02: [io  0x0300-0x031f]
[    0.152540] pnp 00:02: [irq 6]
[    0.152559] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[    0.152570] pnp 00:03: [io  0x0000-0x0008]
[    0.152572] pnp 00:03: [io  0x000a-0x000f]
[    0.152574] pnp 00:03: [io  0x0081-0x0083]
[    0.152576] pnp 00:03: [io  0x0087]
[    0.152577] pnp 00:03: [io  0x0089-0x008b]
[    0.152583] pnp 00:03: [io  0x008f]
[    0.152584] pnp 00:03: [io  0x00c0-0x00d1]
[    0.152586] pnp 00:03: [io  0x00d4-0x00df]
[    0.152588] pnp 00:03: [dma 4]
[    0.152606] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.152673] pnp 00:04: [irq 0 disabled]
[    0.152678] pnp 00:04: [irq 8]
[    0.152680] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.152718] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.152790] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.152802] pnp 00:05: [io  0x00f0-0x00f1]
[    0.152807] pnp 00:05: [irq 13]
[    0.152829] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.152928] pnp 00:06: [io  0x0400-0x047f]
[    0.152930] pnp 00:06: [io  0x0480-0x04ff]
[    0.152932] pnp 00:06: [io  0x0500-0x057f]
[    0.152934] pnp 00:06: [io  0x0580-0x05ff]
[    0.152935] pnp 00:06: [io  0x0800-0x087f]
[    0.152937] pnp 00:06: [io  0x0880-0x08ff]
[    0.152939] pnp 00:06: [io  0x0010-0x001f]
[    0.152940] pnp 00:06: [io  0x0022-0x003f]
[    0.152942] pnp 00:06: [io  0x0044-0x005f]
[    0.152944] pnp 00:06: [io  0x0063]
[    0.152945] pnp 00:06: [io  0x0065]
[    0.152947] pnp 00:06: [io  0x0067-0x006f]
[    0.152948] pnp 00:06: [io  0x0072-0x0073]
[    0.152950] pnp 00:06: [io  0x0074-0x007f]
[    0.152952] pnp 00:06: [io  0x0091-0x0093]
[    0.152953] pnp 00:06: [io  0x0097-0x009f]
[    0.152955] pnp 00:06: [io  0x00a2-0x00bf]
[    0.152957] pnp 00:06: [io  0x00e0-0x00ef]
[    0.152958] pnp 00:06: [io  0x04d0-0x04d1]
[    0.152960] pnp 00:06: [io  0x0080]
[    0.152962] pnp 00:06: [io  0x0295-0x0296]
[    0.152972] pnp 00:06: disabling [io  0x0010-0x001f] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153068] pnp 00:06: disabling [io  0x0022-0x003f] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153165] pnp 00:06: disabling [io  0x0044-0x005f] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153261] pnp 00:06: disabling [io  0x0063] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153356] pnp 00:06: disabling [io  0x0065] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153451] pnp 00:06: disabling [io  0x0067-0x006f] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153547] pnp 00:06: disabling [io  0x0072-0x0073] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153644] pnp 00:06: disabling [io  0x0074-0x007f] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153740] pnp 00:06: disabling [io  0x0091-0x0093] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153836] pnp 00:06: disabling [io  0x0097-0x009f] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.153933] pnp 00:06: disabling [io  0x00a2-0x00bf] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.154029] pnp 00:06: disabling [io  0x00e0-0x00ef] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.154126] pnp 00:06: disabling [io  0x0080] because it overlaps 0000:00:03.2 BAR 0 [io  0x0000-0x00ff]
[    0.154257] system 00:06: [io  0x0400-0x047f] has been reserved
[    0.159064] system 00:06: [io  0x0480-0x04ff] has been reserved
[    0.159134] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.159203] system 00:06: [io  0x0580-0x05ff] has been reserved
[    0.159272] system 00:06: [io  0x0800-0x087f] has been reserved
[    0.159341] system 00:06: [io  0x0880-0x08ff] has been reserved
[    0.159411] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.159480] system 00:06: [io  0x0295-0x0296] has been reserved
[    0.159550] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.159558] pnp 00:07: [io  0x0070-0x0077]
[    0.159579] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.160043] pnp: PnP ACPI: found 8 devices
[    0.160108] ACPI: ACPI bus type pnp unregistered
[    0.196647] PCI: max bus depth: 2 pci_try_num: 3
[    0.196727] pci 0000:00:03.2: BAR 0: assigned [io  0x2000-0x20ff]
[    0.196799] pci 0000:01:00.0: PCI bridge to [bus 02-02]
[    0.196871] pci 0000:01:00.0:   bridge window [mem 0xd3400000-0xd34fffff]
[    0.196950] pci 0000:00:0e.0: PCI bridge to [bus 01-02]
[    0.197027] pci 0000:00:0e.0:   bridge window [mem 0xd3400000-0xd34fffff]
[    0.197116] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[    0.197192] pci 0000:00:15.0:   bridge window [mem 0xd3300000-0xd33fffff]
[    0.197282] pci 0000:00:16.0: PCI bridge to [bus 04-04]
[    0.197358] pci 0000:00:16.0:   bridge window [mem 0xd3200000-0xd32fffff]
[    0.197435] pci 0000:00:16.0:   bridge window [mem 0xd3100000-0xd31fffff 64bit pref]
[    0.197538] pci 0000:00:17.0: PCI bridge to [bus 05-05]
[    0.197606] pci 0000:00:17.0:   bridge window [io  0x1000-0x1fff]
[    0.197677] pci 0000:00:17.0:   bridge window [mem 0xd2000000-0xd30fffff]
[    0.197749] pci 0000:00:17.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.197972] ACPI: PCI Interrupt Link [Z00B] enabled at IRQ 23
[    0.198075] pci 0000:00:15.0: power state changed by ACPI to D0
[    0.198149] pci 0000:00:15.0: power state changed by ACPI to D0
[    0.198338] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 22
[    0.198533] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21
[    0.198613] pci 0000:00:17.0: setting latency timer to 64
[    0.198616] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.198618] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.198620] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.198623] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.198625] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.198627] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.198629] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[    0.198631] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.198633] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.198635] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.198637] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[    0.198639] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.198641] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.198643] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[    0.198645] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[    0.198648] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[    0.198650] pci_bus 0000:00: resource 20 [mem 0xc0000000-0xfebfffff]
[    0.198652] pci_bus 0000:01: resource 1 [mem 0xd3400000-0xd34fffff]
[    0.198654] pci_bus 0000:02: resource 1 [mem 0xd3400000-0xd34fffff]
[    0.198656] pci_bus 0000:03: resource 1 [mem 0xd3300000-0xd33fffff]
[    0.198658] pci_bus 0000:04: resource 1 [mem 0xd3200000-0xd32fffff]
[    0.198661] pci_bus 0000:04: resource 2 [mem 0xd3100000-0xd31fffff 64bit pref]
[    0.198663] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[    0.198665] pci_bus 0000:05: resource 1 [mem 0xd2000000-0xd30fffff]
[    0.198667] pci_bus 0000:05: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.198691] NET: Registered protocol family 2
[    0.198801] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.199032] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.199417] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.199629] TCP: Hash tables configured (established 131072 bind 65536)
[    0.199700] TCP reno registered
[    0.199763] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.199837] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.199950] NET: Registered protocol family 1
[    0.200158] pci 0000:00:04.0: power state changed by ACPI to D0
[    0.200230] pci 0000:00:04.0: power state changed by ACPI to D0
[    0.200422] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
[    0.272043] pci 0000:00:04.1: power state changed by ACPI to D0
[    0.272115] pci 0000:00:04.1: power state changed by ACPI to D0
[    0.272299] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
[    0.272407] pci 0000:00:06.0: power state changed by ACPI to D0
[    0.272478] pci 0000:00:06.0: power state changed by ACPI to D0
[    0.272662] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
[    0.328042] pci 0000:00:06.1: power state changed by ACPI to D0
[    0.328114] pci 0000:00:06.1: power state changed by ACPI to D0
[    0.328297] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 17
[    0.328575] PCI: CLS mismatch (256 != 64), using 64 bytes
[    0.328586] pci 0000:05:00.0: Boot video device
[    0.329129] highmem bounce pool size: 64 pages
[    0.331021] VFS: Disk quotas dquot_6.5.2
[    0.331130] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.331544] msgmni has been set to 1716
[    0.331793] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.331883] io scheduler noop registered
[    0.331947] io scheduler deadline registered
[    0.332034] io scheduler cfq registered (default)
[    0.332365] pcieport 0000:00:0e.0: irq 40 for MSI/MSI-X
[    0.332675] pcieport 0000:00:15.0: irq 41 for MSI/MSI-X
[    0.332981] pcieport 0000:00:16.0: irq 42 for MSI/MSI-X
[    0.333181] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    0.333253] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.333323] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.333400] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    0.333437] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[    0.333508] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.333585] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[    0.333622] pcieport 0000:00:16.0: Signaling PME through PCIe PME interrupt
[    0.333693] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    0.333763] pci 0000:04:00.1: Signaling PME through PCIe PME interrupt
[    0.333840] pcie_pme 0000:00:16.0:pcie01: service driver pcie_pme loaded
[    0.333896] intel_idle: MWAIT substates: 0x3122220
[    0.333898] intel_idle: does not run on family 6 model 23
[    0.333968] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.334062] ACPI: Power Button [PWRB]
[    0.334166] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.334258] ACPI: Sleep Button [SLPB]
[    0.334367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.334457] ACPI: Power Button [PWRF]
[    0.334677] Monitor-Mwait will be used to enter C-1 state
[    0.334706] Monitor-Mwait will be used to enter C-2 state
[    0.334730] Monitor-Mwait will be used to enter C-3 state
[    0.334738] Marking TSC unstable due to TSC halts in idle
[    0.334817] ACPI: acpi_idle registered with cpuidle
[    0.336466] Linux agpgart interface v0.103
[    0.336618] ahci 0000:00:0a.0: version 3.0
[    0.336683] ata_generic 0000:00:0a.0: power state changed by ACPI to D0
[    0.336755] ata_generic 0000:00:0a.0: power state changed by ACPI to D0
[    0.336946] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 16
[    0.337043] ata_generic 0000:00:0a.0: setting latency timer to 64
[    0.337260] scsi0 : ata_generic
[    0.337389] scsi1 : ata_generic
[    0.337558] ata1: PATA max UDMA/100 cmd 0x2298 ctl 0x22a4 bmdma 0x2280 irq 16
[    0.337631] ata2: PATA max UDMA/100 cmd 0x2290 ctl 0x22a0 bmdma 0x2288 irq 16
[    0.337738] tg3.c:v3.122 (December 7, 2011)
[    0.348157] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM957765) rev 57785000] (PCI Express) MAC address c4:2c:03:1d:1e:1e
[    0.348257] tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    0.348353] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.348444] tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[    0.348578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.348660] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[    0.348731] ehci_hcd 0000:00:04.1: power state changed by ACPI to D0
[    0.348812] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    0.348815] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    0.348887] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[    0.348989] ehci_hcd 0000:00:04.1: disable lpm/ppcd for nvidia mcp89
[    0.349046] ehci_hcd 0000:00:04.1: debug port 1
[    0.372017] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    0.372031] ehci_hcd 0000:00:04.1: irq 19, io mem 0xd358b100
[    0.384014] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.10
[    0.384109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.384180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.384270] usb usb1: Product: EHCI Host Controller
[    0.384336] usb usb1: Manufacturer: Linux 3.3.5-mpc89mac4gb-gcc4.6 ehci_hcd
[    0.384407] usb usb1: SerialNumber: 0000:00:04.1
[    0.384566] hub 1-0:1.0: USB hub found
[    0.384632] hub 1-0:1.0: 6 ports detected
[    0.384756] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[    0.384828] ehci_hcd 0000:00:06.1: power state changed by ACPI to D0
[    0.384907] ehci_hcd 0000:00:06.1: setting latency timer to 64
[    0.384910] ehci_hcd 0000:00:06.1: EHCI Host Controller
[    0.384980] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[    0.385080] ehci_hcd 0000:00:06.1: disable lpm/ppcd for nvidia mcp89
[    0.385136] ehci_hcd 0000:00:06.1: debug port 1
[    0.408015] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
[    0.408028] ehci_hcd 0000:00:06.1: irq 17, io mem 0xd358b000
[    0.420014] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.10
[    0.420101] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.420173] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.420262] usb usb2: Product: EHCI Host Controller
[    0.420328] usb usb2: Manufacturer: Linux 3.3.5-mpc89mac4gb-gcc4.6 ehci_hcd
[    0.420399] usb usb2: SerialNumber: 0000:00:06.1
[    0.420549] hub 2-0:1.0: USB hub found
[    0.420614] hub 2-0:1.0: 6 ports detected
[    0.420738] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.420817] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[    0.420888] ohci_hcd 0000:00:04.0: power state changed by ACPI to D0
[    0.420968] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    0.420970] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    0.421041] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[    0.421147] ohci_hcd 0000:00:04.0: irq 20, io mem 0xd358a000
[    0.478008] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.478080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.478169] usb usb3: Product: OHCI Host Controller
[    0.478235] usb usb3: Manufacturer: Linux 3.3.5-mpc89mac4gb-gcc4.6 ohci_hcd
[    0.478306] usb usb3: SerialNumber: 0000:00:04.0
[    0.478458] hub 3-0:1.0: USB hub found
[    0.478525] hub 3-0:1.0: 6 ports detected
[    0.478645] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[    0.478717] ohci_hcd 0000:00:06.0: power state changed by ACPI to D0
[    0.478797] ohci_hcd 0000:00:06.0: setting latency timer to 64
[    0.478799] ohci_hcd 0000:00:06.0: OHCI Host Controller
[    0.478869] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[    0.478977] ohci_hcd 0000:00:06.0: irq 18, io mem 0xd3589000
[    0.500207] ata1.00: ATA-8: TOSHIBA MK3255GSXF, FH415B, max UDMA/100
[    0.500278] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.500350] ata1.00: configured for UDMA/100
[    0.500510] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3255GS FH41 PQ: 0 ANSI: 5
[    0.500703] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.500829] sd 0:0:0:0: [sda] Write Protect is off
[    0.500906] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.500937] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.534008] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.534080] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.534169] usb usb4: Product: OHCI Host Controller
[    0.534236] usb usb4: Manufacturer: Linux 3.3.5-mpc89mac4gb-gcc4.6 ohci_hcd
[    0.534307] usb usb4: SerialNumber: 0000:00:06.0
[    0.534462] hub 4-0:1.0: USB hub found
[    0.534528] hub 4-0:1.0: 6 ports detected
[    0.534667] usbcore: registered new interface driver libusual
[    0.534771] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.535712] i8042: No controller found
[    0.535840] mousedev: PS/2 mouse device common for all mice
[    0.536043] rtc_cmos 00:07: RTC can wake from S4
[    0.536298] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.536415] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    0.536590] cpuidle: using governor ladder
[    0.536702] cpuidle: using governor menu
[    0.536865] usbcore: registered new interface driver usbhid
[    0.536933] usbhid: USB HID core driver
[    0.542014] TCP cubic registered
[    0.542229] NET: Registered protocol family 10
[    0.542874] Mobile IPv6
[    0.542936] NET: Registered protocol family 17
[    0.543003] Registering the dns_resolver key type
[    0.543081] Using IPI No-Shortcut mode
[    0.577009]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    0.577711] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.605362] rtc_cmos 00:07: setting system clock to 2012-05-10 17:51:22 UTC (1336672282)
[    0.656245] ata2.01: NODEV after polling detection
[    0.664222] ata2.00: ATAPI: HL-DT-STDVDRW  GA32N, KC12, max UDMA/100
[    0.664294] ata2.00: configured for UDMA/100
[    0.668017] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRW  GA32N     KC12 PQ: 0 ANSI: 5
[    0.672295] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    0.672369] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.672564] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.683375] EXT2-fs (sda4): error: couldn't mount because of unsupported optional features (240)
[    0.683770] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities
[    0.719188] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    0.719283] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[    0.719412] Freeing unused kernel memory: 308k freed
[    0.719619] Write protecting the kernel text: 2848k
[    0.719718] Write protecting the kernel read-only data: 1048k
[    0.944124] usb 3-4: new low-speed USB device number 2 using ohci_hcd
[    1.178110] usb 3-4: New USB device found, idVendor=047b, idProduct=0002
[    1.178191] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.178263] usb 3-4: Product: USB Keyboard and Mouse
[    1.178329] usb 3-4: Manufacturer: SILITEK
[    1.195358] input: SILITEK USB Keyboard and Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4:1.0/input/input3
[    1.195587] generic-usb 0003:047B:0002.0001: input,hidraw0: USB HID v1.00 Keyboard [SILITEK USB Keyboard and Mouse] on usb-0000:00:04.0-4/input0
[    1.217171] input: SILITEK USB Keyboard and Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4:1.1/input/input4
[    1.217460] generic-usb 0003:047B:0002.0002: input,hidraw1: USB HID v1.00 Mouse [SILITEK USB Keyboard and Mouse] on usb-0000:00:04.0-4/input1
[    1.328106] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[    1.460405] usb 2-4: New USB device found, idVendor=0424, idProduct=2514
[    1.460480] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.460698] hub 2-4:1.0: USB hub found
[    1.460817] hub 2-4:1.0: 3 ports detected
[    1.932100] usb 4-5: new low-speed USB device number 2 using ohci_hcd
[    2.148114] usb 4-5: New USB device found, idVendor=05ac, idProduct=8242
[    2.148195] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.148315] usb 4-5: Product: IR Receiver
[    2.148379] usb 4-5: Manufacturer: Apple Computer, Inc.
[    2.167257] apple 0003:05AC:8242.0003: hiddev0,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:06.0-5/input0
[    2.468108] usb 4-6: new full-speed USB device number 3 using ohci_hcd
[    2.690049] usb 4-6: New USB device found, idVendor=0a5c, idProduct=4500
[    2.690141] usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.690219] usb 4-6: Product: BRCM2070 Hub
[    2.690293] usb 4-6: Manufacturer: Apple Inc.
[    2.693088] hub 4-6:1.0: USB hub found
[    2.696040] hub 4-6:1.0: 3 ports detected
[    2.796143] usb 2-4.1: new high-speed USB device number 5 using ehci_hcd
[    2.904391] usb 2-4.1: New USB device found, idVendor=0424, idProduct=2640
[    2.904467] usb 2-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.904753] hub 2-4.1:1.0: USB hub found
[    2.904870] hub 2-4.1:1.0: 3 ports detected
[    2.992143] usb 2-4.3: new high-speed USB device number 6 using ehci_hcd
[    3.377089] usb 2-4.3: New USB device found, idVendor=046d, idProduct=0821
[    3.377185] usb 2-4.3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    3.377279] usb 2-4.3: SerialNumber: 44AC0E90
[    3.454043] usb 4-6.1: new full-speed USB device number 4 using ohci_hcd
[    3.565088] usb 4-6.1: New USB device found, idVendor=05ac, idProduct=820a
[    3.565169] usb 4-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.575345] input: HID 05ac:820a as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.1/4-6.1:1.0/input/input5
[    3.575554] generic-usb 0003:05AC:820A.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-6.1/input0
[    3.650033] usb 4-6.2: new full-speed USB device number 5 using ohci_hcd
[    3.705353] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0)
[    3.705463] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0)
[    3.705601] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0)
[    3.705772] bcma: Found rev 6 PMU (capabilities 0x108C2606)
[    3.776024] bcma: Failed to get SPROM: -71
[    3.776058] usb 4-6.2: New USB device found, idVendor=05ac, idProduct=820b
[    3.776061] usb 4-6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.776288] bcma: Bus registered
[    3.785250] input: HID 05ac:820b as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.2/4-6.2:1.0/input/input6
[    3.785463] generic-usb 0003:05AC:820B.0005: input,hidraw4: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-6.2/input0
[    3.862112] usb 4-6.3: new full-speed USB device number 6 using ohci_hcd
[    3.983040] usb 4-6.3: New USB device found, idVendor=05ac, idProduct=8218
[    3.983117] usb 4-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.983214] usb 4-6.3: Product: Bluetooth USB Host Controller
[    3.983282] usb 4-6.3: Manufacturer: Apple Inc.
[    4.072133] usb 2-4.1.1: new high-speed USB device number 7 using ehci_hcd
[    4.145655] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    4.198601] cfg80211: Calling CRDA to update world regulatory domain
[    4.202436] usb 2-4.1.1: New USB device found, idVendor=0424, idProduct=4063
[    4.202510] usb 2-4.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.202600] usb 2-4.1.1: Product: Ultra Fast Media Reader
[    4.202670] usb 2-4.1.1: Manufacturer: Generic
[    4.202738] usb 2-4.1.1: SerialNumber: 000000264001
[    4.212149] Initializing USB Mass Storage driver...
[    4.212499] scsi2 : usb-storage 2-4.1.1:1.0
[    4.212621] usbcore: registered new interface driver usb-storage
[    4.212692] USB Mass Storage support registered.
[    4.281434] applesmc: key=215 fan=1 temp=29 acc=0 lux=0 kbd=0
[    4.292135] usb 2-4.1.2: new full-speed USB device number 8 using ehci_hcd
[    4.343541] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 22
[    4.392118] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x2
[    4.400876] usb 2-4.1.2: New USB device found, idVendor=067b, idProduct=2303
[    4.400954] usb 2-4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.401047] usb 2-4.1.2: Product: USB-Serial Controller D
[    4.401116] usb 2-4.1.2: Manufacturer: Prolific Technology Inc. 
[    4.638392] sdhci: Secure Digital Host Controller Interface driver
[    4.638520] sdhci: Copyright(c) Pierre Ossman
[    4.714515] sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 0)
[    4.718354] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 23
[    4.718426] sdhci-pci 0000:04:00.1: Invalid iomem size. You may experience problems.
[    4.718614] Registered led device: mmc0::
[    4.719671] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
[    4.724052] bcma: Switched to core: 0x812
[    4.853291] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.853774] brcms_module_init: register returned 0
[    4.893222] firewire_core: created device fw0: GUID e80688fffeeab6ae, S800
[    4.922022] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[    4.922099] snd_hda_intel 0000:00:08.0: power state changed by ACPI to D0
[    4.922311] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
[    4.922382] hda_intel: Disabling MSI
[    4.922445] hda_intel: position_fix set to 1 for device 10de:cb89
[    4.922537] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[    5.217352] scsi 2:0:0:0: Direct-Access     Generic  Ultra HS-SD/MMC  1.91 PQ: 0 ANSI: 0
[    5.225479] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    5.473519] usbcore: registered new interface driver uas
[    5.482133] Linux video capture interface: v2.00
[    5.634632] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
[    5.684277] usbcore: registered new interface driver usbserial
[    5.684358] USB Serial support registered for generic
[    5.694255] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.694359] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.694460] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    5.754630] nvidia: module license 'NVIDIA' taints kernel.
[    5.754702] Disabling lock debugging due to kernel taint
[    5.773079] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 21
[    5.773157] nvidia 0000:05:00.0: setting latency timer to 64
[    5.773162] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.773459] NVRM: loading NVIDIA UNIX x86 Kernel Module  295.49  Mon Apr 30 23:30:07 PDT 2012
[    5.847417] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:06.1/usb2/2-4/2-4.3/2-4.3:1.2/input/input8
[    5.847643] usbcore: registered new interface driver uvcvideo
[    5.847713] USB Video Class driver (1.1.1)
[    5.900882] Bluetooth: Core ver 2.16
[    5.900967] NET: Registered protocol family 31
[    5.901033] Bluetooth: HCI device and connection manager initialized
[    5.901104] Bluetooth: HCI socket layer initialized
[    5.901170] Bluetooth: L2CAP socket layer initialized
[    5.901240] Bluetooth: SCO socket layer initialized
[    5.902891] usbcore: registered new interface driver snd-usb-audio
[    5.902908] usbcore: registered new interface driver usbserial_generic
[    5.902910] usbserial: USB Serial Driver core
[    5.919817] usbcore: registered new interface driver btusb
[    5.924675] USB Serial support registered for pl2303
[    5.924766] pl2303 2-4.1.2:1.0: pl2303 converter detected
[    5.926467] usb 2-4.1.2: pl2303 converter now attached to ttyUSB0
[    5.926558] usbcore: registered new interface driver pl2303
[    5.931469] pl2303: Prolific PL2303 USB to serial adaptor driver
[    5.945044] usb 4-6.1: USB disconnect, device number 4
[    6.084047] usb 4-6.2: USB disconnect, device number 5
[    6.400078] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.424075] HDMI status: Codec=4 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.448039] HDMI status: Codec=5 Pin=5 Presence_Detect=0 ELD_Valid=0
[    6.448184] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[    6.448378] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[    6.448562] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input11
[    6.448723] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:08.0/sound/card0/input12
[    9.994432] Adding 12287996k swap on /dev/sda5.  Priority:-1 extents:1 across:12287996k 
[    9.997188] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
[    9.997701] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[   10.109998] loop: module loaded
[   11.209493] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   11.389673] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended
[   11.396456] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[   11.518625] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   12.458711] RPC: Registered named UNIX socket transport module.
[   12.458802] RPC: Registered udp transport module.
[   12.458870] RPC: Registered tcp transport module.
[   12.458937] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.499368] FS-Cache: Loaded
[   12.515648] FS-Cache: Netfs 'nfs' registered for caching
[   12.520460] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[   13.312403] fuse init (API version 7.18)
[   30.100370] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[   30.100467] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[   30.102286] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   30.156302] tg3 0000:04:00.0: irq 43 for MSI/MSI-X
[   30.156309] tg3 0000:04:00.0: irq 44 for MSI/MSI-X
[   30.156314] tg3 0000:04:00.0: irq 45 for MSI/MSI-X
[   30.444072] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   32.221706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.221800] Bluetooth: BNEP filters: protocol multicast
[   32.426799] Bluetooth: RFCOMM TTY layer initialized
[   32.426873] Bluetooth: RFCOMM socket layer initialized
[   32.426943] Bluetooth: RFCOMM ver 1.11
[   32.861901] tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex
[   32.861976] tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
[   32.862215] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   37.800326] HDMI hot plug event: Codec=4 Pin=5 Presence_Detect=1 ELD_Valid=0
[   37.808026] HDMI status: Codec=4 Pin=5 Presence_Detect=1 ELD_Valid=0
[   37.819985] HDMI hot plug event: Codec=4 Pin=5 Presence_Detect=0 ELD_Valid=1
[   37.824042] HDMI status: Codec=4 Pin=5 Presence_Detect=1 ELD_Valid=1
[   38.592071] HDMI: detected monitor DELL U2711
[   38.592073]    at connection type DisplayPort
[   38.592078] HDMI: available speakers: FL/FR LFE FC RL/RR
[   38.592084] HDMI: supports coding type LPCM: channels = 6, rates = 32000 44100 48000 88200 96000 176400 192000, bits = 16 20 24
[   50.512169] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   50.529533] NFSD: starting 90-second grace period
[   55.570547] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,commit=0
[   55.648653] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   55.793113] EXT4-fs (sda7): re-mounted. Opts: commit=0
[   60.747850] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   60.748771] apple 0005:05AC:0239.0006: unknown main item tag 0x0
[   60.788722] power_supply hid-E8:06:88:4B:BA:19-battery: driver failed to report `capacity' property: 4294967291
[   60.788862] input: Brent Roman's Keyboard as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.3/4-6.3:1.0/bluetooth/hci0/hci0:11/input13
[   60.789009] apple 0005:05AC:0239.0006: input,hidraw3: BLUETOOTH HID v0.50 Keyboard [Brent Roman's Keyboard] on 60:33:4B:0C:4E:0C
[   60.794596] power_supply hid-E8:06:88:4B:BA:19-battery: driver failed to report `capacity' property: 4294967291
[  112.034805] magicmouse 0005:05AC:030E.0007: unknown main item tag 0x0
[  112.198372] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  112.198468] input: Brent Roman's Trackpad as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.3/4-6.3:1.0/bluetooth/hci0/hci0:12/input14
[  112.198560] magicmouse 0005:05AC:030E.0007: input,hidraw4: BLUETOOTH HID v1.60 Mouse [Brent Roman's Trackpad] on 60:33:4B:0C:4E:0C
[  112.199753] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  137.264152] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  137.266005] magicmouse 0005:05AC:030E.0008: unknown main item tag 0x0
[  137.290764] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  137.290875] input: Brent Roman's Trackpad as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.3/4-6.3:1.0/bluetooth/hci0/hci0:13/input15
[  137.291003] magicmouse 0005:05AC:030E.0008: input,hidraw4: BLUETOOTH HID v1.60 Mouse [Brent Roman's Trackpad] on 60:33:4B:0C:4E:0C
[  137.299721] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  149.340584] usb 2-4.1.3: new low-speed USB device number 9 using ehci_hcd
[  149.453780] usb 2-4.1.3: New USB device found, idVendor=046d, idProduct=c00e
[  149.453787] usb 2-4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  149.453790] usb 2-4.1.3: Product: USB-PS/2 Optical Mouse
[  149.453793] usb 2-4.1.3: Manufacturer: Logitech
[  149.457427] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:06.1/usb2/2-4/2-4.1/2-4.1.3/2-4.1.3:1.0/input/input16
[  149.457608] generic-usb 0003:046D:C00E.0009: input,hidraw5: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:06.1-4.1.3/input0
[  162.344148] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  272.605014] magicmouse 0005:05AC:030E.000A: unknown main item tag 0x0
[  272.612407] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  272.612483] input: Brent Roman's Trackpad as /devices/pci0000:00/0000:00:06.0/usb4/4-6/4-6.3/4-6.3:1.0/bluetooth/hci0/hci0:12/input17
[  272.613032] magicmouse 0005:05AC:030E.000A: input,hidraw4: BLUETOOTH HID v1.60 Mouse [Brent Roman's Trackpad] on 60:33:4B:0C:4E:0C
[  272.613710] power_supply hid-C8:BC:C8:F8:BE:7B-battery: driver failed to report `capacity' property: 4294967291
[  302.484091] usb 2-4.1.3: USB disconnect, device number 9
00:00.0 0600: 10de:0d60 (rev a1)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.1 0500: 10de:0d68 (rev a1)
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.0 0500: 10de:0d6d (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.1 0500: 10de:0d6e (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.2 0500: 10de:0d6f (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.3 0500: 10de:0d70 (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 0500: 10de:0d71 (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.1 0500: 10de:0d72 (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:03.0 0601: 10de:0d80 (rev a2)
	Subsystem: 106b:cb89
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: I/O ports at 2100 [size=256]

00:03.1 0500: 10de:0d7b (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:03.2 0c05: 10de:0d79 (rev a1)
	Subsystem: 10de:cb89
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 2000 [size=256]
	Region 4: I/O ports at 2240 [size=64]
	Region 5: I/O ports at 2200 [size=64]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:03.3 0500: 10de:0d69 (rev a1)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:03.4 0b40: 10de:0d7a (rev a1)
	Subsystem: 10de:cb89
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 14
	Region 0: Memory at d3500000 (32-bit, non-prefetchable) [size=512K]

00:04.0 0c03: 10de:0d9c (rev a1) (prog-if 10 [OHCI])
	Subsystem: 10de:cb89
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at d358a000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
	Kernel driver in use: ohci_hcd

00:04.1 0c03: 10de:0d9d (rev a2) (prog-if 20 [EHCI])
	Subsystem: 10de:cb89
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at d358b100 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=00a0
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd

00:06.0 0c03: 10de:0d9c (rev a1) (prog-if 10 [OHCI])
	Subsystem: 10de:cb89
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at d3589000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
	Kernel driver in use: ohci_hcd

00:06.1 0c03: 10de:0d9d (rev a2) (prog-if 20 [EHCI])
	Subsystem: 10de:cb89
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at d358b000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=00a0
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: ehci_hcd

00:08.0 0403: 10de:0d94 (rev a2)
	Subsystem: 10de:cb89
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at d3580000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: snd_hda_intel

00:0a.0 0101: 10de:0d85 (rev a2) (prog-if 85 [Master SecO PriO])
	Subsystem: 106b:cb89
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 2298 [size=8]
	Region 1: I/O ports at 22a4 [size=4]
	Region 2: I/O ports at 2290 [size=8]
	Region 3: I/O ports at 22a0 [size=4]
	Region 4: I/O ports at 2280 [size=16]
	Region 5: Memory at d3584000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [8c] SATA HBA v1.0 InCfgSpace
	Capabilities: [b0] MSI: Enable- Count=1/8 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Kernel driver in use: ata_generic

00:0b.0 0500: 10de:0d75 (rev a1)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at d3588000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000

00:0e.0 0604: 10de:0d9a (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
	Memory behind bridge: d3400000-d34fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: 10de:0000
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4171
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport

00:15.0 0604: 10de:0d9b (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: d3300000-d33fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: 10de:0000
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4179
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport

00:16.0 0604: 10de:0d9b (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Memory behind bridge: d3200000-d32fffff
	Prefetchable memory behind bridge: 00000000d3100000-00000000d31fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: 10de:0000
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
		Address: 00000000fee0300c  Data: 4181
	Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
		Mapping Address Base: 00000000fee00000
	Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Surprise- LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg+
			Control: AttnInd Off, PwrInd On, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Kernel driver in use: pcieport

00:17.0 0604: 10de:0d76 (rev a1) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: d2000000-d30fffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: 10de:0000
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000

01:00.0 0604: 104c:823e (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Bus: primary=01, secondary=02, subordinate=02, sec-latency=0
	Memory behind bridge: d3400000-d34fffff
	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+
	Capabilities: [60] MSI: Enable- Count=1/16 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [80] Subsystem: 0000:0000
	Capabilities: [90] Express (v1) PCI/PCI-X Bridge, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ BrConfRtry-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <16us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-

02:00.0 0c00: 104c:823f (rev 01) (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 248 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at d3404000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at d3400000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [44] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
	Kernel driver in use: firewire_ohci

03:00.0 0280: 14e4:4353 (rev 01)
	Subsystem: 106b:0093
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at d3300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
	Capabilities: [58] Vendor Specific Information: Len=78 <?>
	Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [d0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM+ Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [13c v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Capabilities: [160 v1] Device Serial Number 54-70-4b-ff-ff-0c-60-33
	Capabilities: [16c v1] Power Budgeting <?>
	Kernel driver in use: bcma-pci-bridge

04:00.0 0200: 14e4:16b4
	Subsystem: 14e4:16b4
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at d3100000 (64-bit, prefetchable) [size=64K]
	Region 2: Memory at d3110000 (64-bit, prefetchable) [size=64K]
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [a0] MSI-X: Enable+ Count=7 Masked-
		Vector table: BAR=2 offset=00000000
		PBA: BAR=2 offset=00000120
	Capabilities: [ac] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [13c v1] Device Serial Number 00-00-c4-2c-03-1d-1e-1e
	Capabilities: [150 v1] Power Budgeting <?>
	Capabilities: [160 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: tg3

04:00.1 0805: 14e4:16bc (prog-if 01)
	Subsystem: 14e4:0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin B routed to IRQ 23
	Region 0: Memory at d3120000 (64-bit, prefetchable) [size=64K]
	Capabilities: [48] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [ac] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 4096 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <64us
			ClockPM+ Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [150 v1] Power Budgeting <?>
	Capabilities: [160 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: sdhci-pci

05:00.0 0300: 10de:08a4 (rev a2) (prog-if 00 [VGA controller])
	Subsystem: 106b:00c0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at 1000 [size=128]
	[virtual] Expansion ROM at d3000000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [e0] Vendor Specific Information: Len=14 <?>
	Kernel driver in use: nvidia


[Linux Kernel]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]     [Free Dating]     [M2M Wireless]

Add to Google Powered by Linux