This series adds initial support for the 18xx chip family. The new
module uses wlcore for functionality common with the 12xx family.
Arik Nemtsov (28):
wl18xx: create per-chip-family private storage
wl18xx: set the number of Tx descriptors
wl18xx: set normal/GEM Tx spare block counts
wl18xx: implement hw op for calculating hw block count per packet
wl18xx: implement hw op for setting blocks in hw_tx_desc
wl18xx: implement hw op for setting frame length in tx_hw_desc
wl18xx: define HW-rate translation elements/tables
wl18xx: add fw_status private data
wl18xx: set Rx block-size alignment quirk
wl18xx: implement hw op for getting rx buffer data alignment
wl18xx: implement hw op for getting rx packet data length
wl18xx: implement immediate Tx completion
wlcore/wl18xx: add hw op for setting Tx HW checksum
wlcore/wl18xx: add hw op for Rx HW checksum
wlcore: track current channel type per vif
wl18xx: send channel type to FW on role start
wl18xx: ipmlement ap_rate_mask hw op
wlcore: support peer MIMO rates
wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config
wl18xx: set HT capabilities
wl18xx: add module param for overriding HT caps
wl18xx: read FW pc on recovery
wl18xx: disable FW log functionality
wl18xx: implement hw op to read PG version
wl18xx: init Tx-released index to 0 on HW init
wl18xx: don't upload NVS to FW
wl18xx: change board type enum according to new FW
wlcore/wl12xx/18xx: split fw_status struct into two
Assaf Azulay (1):
wl18xx: change default tcp_checksum to false
Luciano Coelho (49):
wl18xx: add new module
wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips
wl18xx: add empty operations struct
wl18xx: add partition table
wl18xx: add register table
wl18xx: add identify chip operation
wl18xx: add some boot operations and hw-specific configurations
wl18xx: add trigger command and ack event operations
wl18xx: add hw_init operation
wl18xx: add runtime configuration parameters
wl18xx: add board type module argument
wl18xx: translate and write the board type to SCR_PAD2
wl18xx: read clock frequency and do top init accordingly
wlcore: rename wl12xx.h to wlcore_i.h
wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx
wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx
wlcore/wl12xx: add plt_init op and move the code to wl12xx
wl18xx: add plt_init operation
wl18xx: change the low_band_component_type for HDK boards
wl18xx: add number of antennas and dc2dc type as module params
wl18xx: add module parameter to disable TCP checksum
wl18xx: derive the MAC address from the BD_ADDR in fuse ROM
wl18xx: add a module parameter to control 11a support
wlcore: add module parameter to dump SDIO reads and writes
wl18xx: copy the default configuration before checking the board_type
wl18xx: changed default board_type to HDK
wlcore: add space for private area when allocating fw_status
wl18xx: change low_band_component_type value for COM8
wlcore: reorder identify_chip and get_hw_info
wl18xx: disable MCS_13 for wl18xx PG 1.0
wlcore: update beacon and probe_resp templates when rates change
wlcore: use all AP basic rates as default
wlcore: abstract debugfs fw_stats to be handled by the lower drivers
wlcore: add debugfs macro to help print fw statistics arrays
wl12xx: implement fw status debugfs entries
wl18xx: implement fw status debugfs entries
wlcore: create private static_data area and add operation to parse it
wl18xx: print the PHY firmware version from the private static data
wlcore: print the interrupt status when recovery is triggered
wl18xx: don't use MIMO when ht_mode is set to wide
wlcore: use proper values for supported local rates
wl18xx: add module parameter to force SISO 20MHz
wl18xx: add power limit reference value to mac_and_phy settings
wl18xx: export low/high band component values as module params
wl18xx: export pwr_limit_reference_11_abg value as a module parameter
wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir
wlcore: increase aggregation buffer size by one page
wl18xx: increase tx_ba_win_size to 64
wl18xx: use new fw stats structures
drivers/net/wireless/ti/Kconfig | 1 +
drivers/net/wireless/ti/Makefile | 1 +
drivers/net/wireless/ti/wl12xx/Makefile | 2 +-
drivers/net/wireless/ti/wl12xx/acx.h | 223 +++++
drivers/net/wireless/ti/wl12xx/cmd.c | 8 +-
drivers/net/wireless/ti/wl12xx/debugfs.c | 243 ++++++
drivers/net/wireless/ti/wl12xx/debugfs.h | 28 +
drivers/net/wireless/ti/wl12xx/main.c | 164 +++-
drivers/net/wireless/ti/wl12xx/wl12xx.h | 8 +
drivers/net/wireless/ti/wl18xx/Kconfig | 6 +
drivers/net/wireless/ti/wl18xx/Makefile | 3 +
drivers/net/wireless/ti/wl18xx/acx.c | 83 ++
drivers/net/wireless/ti/wl18xx/acx.h | 241 ++++++
drivers/net/wireless/ti/wl18xx/conf.h | 53 ++
drivers/net/wireless/ti/wl18xx/debugfs.c | 309 +++++++
drivers/net/wireless/ti/wl18xx/debugfs.h | 28 +
drivers/net/wireless/ti/wl18xx/io.c | 60 ++
drivers/net/wireless/ti/wl18xx/io.h | 28 +
drivers/net/wireless/ti/wl18xx/main.c | 1282 +++++++++++++++++++++++++++++
drivers/net/wireless/ti/wl18xx/reg.h | 241 ++++++
drivers/net/wireless/ti/wl18xx/tx.c | 126 +++
drivers/net/wireless/ti/wl18xx/tx.h | 42 +
drivers/net/wireless/ti/wl18xx/wl18xx.h | 87 ++
drivers/net/wireless/ti/wlcore/acx.c | 8 +-
drivers/net/wireless/ti/wlcore/acx.h | 227 +----
drivers/net/wireless/ti/wlcore/boot.c | 53 +-
drivers/net/wireless/ti/wlcore/boot.h | 1 +
drivers/net/wireless/ti/wlcore/cmd.c | 34 +-
drivers/net/wireless/ti/wlcore/cmd.h | 11 +-
drivers/net/wireless/ti/wlcore/conf.h | 16 +-
drivers/net/wireless/ti/wlcore/debugfs.c | 283 +------
drivers/net/wireless/ti/wlcore/debugfs.h | 87 ++
drivers/net/wireless/ti/wlcore/hw_ops.h | 48 ++
drivers/net/wireless/ti/wlcore/init.c | 3 +
drivers/net/wireless/ti/wlcore/main.c | 362 ++++----
drivers/net/wireless/ti/wlcore/rx.c | 11 +-
drivers/net/wireless/ti/wlcore/rx.h | 7 +-
drivers/net/wireless/ti/wlcore/sdio.c | 35 +-
drivers/net/wireless/ti/wlcore/tx.c | 11 +-
drivers/net/wireless/ti/wlcore/tx.h | 26 +-
drivers/net/wireless/ti/wlcore/wl12xx.h | 507 ------------
drivers/net/wireless/ti/wlcore/wlcore.h | 42 +-
drivers/net/wireless/ti/wlcore/wlcore_i.h | 508 ++++++++++++
43 files changed, 4306 insertions(+), 1241 deletions(-)
create mode 100644 drivers/net/wireless/ti/wl12xx/debugfs.c
create mode 100644 drivers/net/wireless/ti/wl12xx/debugfs.h
create mode 100644 drivers/net/wireless/ti/wl18xx/Kconfig
create mode 100644 drivers/net/wireless/ti/wl18xx/Makefile
create mode 100644 drivers/net/wireless/ti/wl18xx/acx.c
create mode 100644 drivers/net/wireless/ti/wl18xx/acx.h
create mode 100644 drivers/net/wireless/ti/wl18xx/conf.h
create mode 100644 drivers/net/wireless/ti/wl18xx/debugfs.c
create mode 100644 drivers/net/wireless/ti/wl18xx/debugfs.h
create mode 100644 drivers/net/wireless/ti/wl18xx/io.c
create mode 100644 drivers/net/wireless/ti/wl18xx/io.h
create mode 100644 drivers/net/wireless/ti/wl18xx/main.c
create mode 100644 drivers/net/wireless/ti/wl18xx/reg.h
create mode 100644 drivers/net/wireless/ti/wl18xx/tx.c
create mode 100644 drivers/net/wireless/ti/wl18xx/tx.h
create mode 100644 drivers/net/wireless/ti/wl18xx/wl18xx.h
delete mode 100644 drivers/net/wireless/ti/wlcore/wl12xx.h
create mode 100644 drivers/net/wireless/ti/wlcore/wlcore_i.h
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[Linux Kernel]
[Linux Bluetooth]
[Linux Netdev]
[Kernel Newbies]
[Share Photos]
[IDE]
[Security]
[Git]
[Netfilter]
[Bugtraq]
[Photo]
[Yosemite]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Linux ATA RAID]
[Samba]
[Video 4 Linux]
[Device Mapper]
[Linux Resources]
[Free Dating]
[M2M Wireless]
