Search Linux Wireless

Re: [PATCH] rt28xx: Revert eccc068e8e84c8fe997115629925e0422a98e4de which causes txpower to be stuck at 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Helmut Schaa wrote:
> On Sun, May 6, 2012 at 5:38 PM, Tobias Diedrich
> > Before reverting this "iw phy phy0 info" would show "0.0 dBm" as
> > maximum transmit power for all frequencies.
> >
> > After reverting this (and with regdomain set to CH) it is back to
> > the expected 20 dBm.
> 
> Ok, the problem seems to come from the fact that rt2800 doesn't
> register a per channel
> max power to mac80211.

BTW I have a secondary issue that I've today bisected down to some
change between compat-wireless-2012-04-11 and
compat-wireless-2012-04-12, but I still need to narrow it down
further and verify it.
Even with the max_power issue fixed associating with an rt28xx AP
running compat-wireless-2012-04-12 or higher doesn't work (IIRC AP
claims wpa auth succeeded, but STA claims it timed out).
STA mode worked fine though (But only tested it once on Sunday).

-- 
Tobias						PGP: http://8ef7ddba.uguu.de
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux