[PATCH v3 3/8] ath9k_hw: set the PHY mode for half/quarter channels on AR9003

[Felix Fietkau <nbd@xxxxxxxxxxx>]

Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath9k/ar9003_phy.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index bbda25f..be6069b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -723,6 +723,10 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah,
 
 	if (IS_CHAN_A_FAST_CLOCK(ah, chan))
 		rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE);
+	if (IS_CHAN_QUARTER_RATE(chan))
+		rfMode |= AR_PHY_MODE_QUARTER;
+	if (IS_CHAN_HALF_RATE(chan))
+		rfMode |= AR_PHY_MODE_HALF;
 
 	REG_WRITE(ah, AR_PHY_MODE, rfMode);
 }
-- 
1.7.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html