The mac address for the primary interface was handled different from
the other interfaces. The code has been restructured such that the
brcmf_net_attach function treats the interfaces equal.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
.../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 25 +++++++++----------
1 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
index 153d369..07836a8 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c
@@ -843,27 +843,26 @@ static const struct net_device_ops brcmf_netdev_ops_pri = {
.ndo_set_rx_mode = brcmf_netdev_set_multicast_list
};
-static int brcmf_net_attach(struct brcmf_pub *drvr, int ifidx)
+static int brcmf_net_attach(struct brcmf_if *ifp)
{
+ struct brcmf_pub *drvr = ifp->drvr;
struct net_device *ndev;
- u8 temp_addr[ETH_ALEN] = {
- 0x00, 0x90, 0x4c, 0x11, 0x22, 0x33};
+ u8 temp_addr[ETH_ALEN];
- brcmf_dbg(TRACE, "ifidx %d\n", ifidx);
+ brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx);
- ndev = drvr->iflist[ifidx]->ndev;
+ ndev = drvr->iflist[ifp->idx]->ndev;
ndev->netdev_ops = &brcmf_netdev_ops_pri;
/*
- * We have to use the primary MAC for virtual interfaces
+ * determine mac address to use
*/
- if (ifidx != 0) {
- /* for virtual interfaces use the primary MAC */
+ if (is_valid_ether_addr(ifp->mac_addr))
+ memcpy(temp_addr, ifp->mac_addr, ETH_ALEN);
+ else
memcpy(temp_addr, drvr->mac, ETH_ALEN);
- }
-
- if (ifidx == 1) {
+ if (ifp->idx == 1) {
brcmf_dbg(TRACE, "ACCESS POINT MAC:\n");
/* ACCESSPOINT INTERFACE CASE */
temp_addr[0] |= 0X02; /* set bit 2 ,
@@ -879,7 +878,7 @@ static int brcmf_net_attach(struct brcmf_pub *drvr, int ifidx)
memcpy(ndev->dev_addr, temp_addr, ETH_ALEN);
/* attach to cfg80211 for primary interface */
- if (!ifidx) {
+ if (!ifp->idx) {
drvr->config = brcmf_cfg80211_attach(ndev, drvr->dev, drvr);
if (drvr->config == NULL) {
brcmf_dbg(ERROR, "wl_cfg80211_attach failed\n");
@@ -940,7 +939,7 @@ brcmf_add_if(struct device *dev, int ifidx, char *name, u8 *mac_addr)
if (mac_addr != NULL)
memcpy(&ifp->mac_addr, mac_addr, ETH_ALEN);
- if (brcmf_net_attach(drvr, ifp->idx)) {
+ if (brcmf_net_attach(ifp)) {
brcmf_dbg(ERROR, "brcmf_net_attach failed");
free_netdev(ifp->ndev);
drvr->iflist[ifidx] = NULL;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[Linux Kernel]
[Linux Bluetooth]
[Linux Netdev]
[Kernel Newbies]
[Share Photos]
[IDE]
[Security]
[Git]
[Netfilter]
[Bugtraq]
[Photo]
[Yosemite]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Linux ATA RAID]
[Samba]
[Video 4 Linux]
[Device Mapper]
[Linux Resources]
[Free Dating]
[M2M Wireless]