Re: [RFC] 802.11d Country IE parsing/support

["Luis R. Rodriguez" <lrodriguez@xxxxxxxxxxx>]

On Thu, Sep 04, 2008 at 01:23:10AM -0700, Helmut Schaa wrote:
> Am Donnerstag, 4. September 2008 schrieb Luis R. Rodriguez:
> > static int reg_rules_intersect(
> >       struct ieee80211_reg_rule *rule1,
> >       struct ieee80211_reg_rule *rule2,
> >       struct ieee80211_reg_rule **intersected_rule)
> > {
> >       struct ieee80211_freq_range *freq_range1, *freq_range2, *freq_range;
> >       struct ieee80211_power_rule *power_rule1, *power_rule2, *power_rule;
> >       u32 freq_diff;
> >
> >       freq_range1 = &rule1->freq_range;
> >       freq_range2 = &rule2->freq_range;
> >       freq_range = &(*intersected_rule)->freq_range;
> >
> >       power_rule1 = &rule1->power_rule;
> >       power_rule2 = &rule2->power_rule;
> >       power_rule = &(*intersected_rule)->power_rule;
> >
> >       freq_range->start_freq = max(freq_range1->start_freq,
> >               freq_range2->start_freq);
> >       freq_range->end_freq = min(freq_range1->end_freq,
> >               freq_range2->end_freq);
> >       freq_range->max_bandwidth = min(freq_range1->max_bandwidth,
> >               freq_range2->max_bandwidth);
> >
> >       freq_diff = freq_range->end_freq - freq_range->start_freq;
> >       if (freq_range->max_bandwidth > freq_diff)
> >               freq_range->max_bandwidth = freq_diff;
> >
> >       power_rule->max_eirp = min(power_rule1->max_eirp,
> >               power_rule2->max_eirp);
> >       power_rule->max_eirp = min(power_rule1->max_eirp,
> >               power_rule2->max_eirp);
> 
> max_eirp should be max_antenna_gain in the second block, right?

Yes, thanks.

> 
> >       (*intersected_rule)->flags = (rule1->flags | rule2->flags);
> 
> Wouldn't (rule1->flags & rule2->flags) be more feasible?

Well the flags are all negatives, so like:

* Thou shall not kill = 1 << 1
* Thou shall not send "fix" patches after merge window = 1 << 2

And you have one rule with 1 << 1 and another with 1 << 2, you'd want
both so you use "or" to be more restrictive. Using "&" would get you
the negatives they both have in common.

> 
> >       if (!reg_is_valid_rule(*intersected_rule))
> >               return -EINVAL;
> >
> >       return 0;
> > }
> >
> > static int regdom_intersect(
> >       struct ieee80211_regdomain *rd1,
> >       struct ieee80211_regdomain *rd2,
> >       struct ieee80211_regdomain **rd)
> > {
> >       int r, size_of_regd;
> >       unsigned int x, y;
> >       unsigned int num_rules = 0, rule_idx = 0;
> >       struct ieee80211_reg_rule *rule1, *rule2, *intersected_rule;
> >
> >       *rd = NULL;
> >
> >       if (!rd1 || !rd2)
> >               return -EINVAL;
> >
> >       /* First we get a count of the rules we'll need, then we actually
> >        * build them. This is to so we can kzalloc() and kfree() a
> >        * regdomain once */
> >
> >       for (x = 0; x < rd1->n_reg_rules; x++) {
> >               rule1 = &rd1->reg_rules[x];
> >               for (y = 0; y < rd2->n_reg_rules; y++) {
> >                       rule2 = &rd2->reg_rules[y];
> >                       if (!reg_rules_intersect(rule1, rule2,
> >                                       &intersected_rule))
> 
> Hmm, &intersected_rule is uninitialized here and reg_rules_intersect does not
> allocate anything.

Ah yes, since its just a temporary rule we will disregard we can use the
stack then for this, will fix, thanks.

> 
> >                               num_rules++;
> >               }
> >       }
> >
> >       if (!num_rules)
> >               return -ENODATA;
> >
> >       size_of_regd = sizeof(struct ieee80211_regdomain) +
> >               (num_rules * sizeof(struct ieee80211_reg_rule));
> >
> >       *rd = kzalloc(size_of_regd, GFP_KERNEL);
> >       if (!*rd)
> >               return -ENOMEM;
> >
> >       for (x = 0; x < rd1->n_reg_rules; x++) {
> >               rule1 = &rd1->reg_rules[x];
> >               for (y = 0; y < rd2->n_reg_rules; y++) {
> >                       rule2 = &rd2->reg_rules[y];
> >                       r = reg_rules_intersect(rule1, rule2,
> >                               &intersected_rule);
> 
> Same here.

Thanks, we can use the stack.

> 
> >                       if (r)
> >                               continue;
> >                       memcpy(&(*rd)->reg_rules[rule_idx],
> >                               intersected_rule,
> >                               sizeof(intersected_rule));
> 
> sizeof(*intersected_rule)?

Yes, thanks for your review!

  Luis
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html