Re: Logitech HD Webcam C525 does not work when connected to USB 2 port, works on USB 3

[Frederik Himpe <fhimpe@xxxxxxxxxx>]

On Sat, 2012-06-30 at 22:12 -0400, Alan Stern wrote:
> On Sat, 30 Jun 2012, Frederik Himpe wrote:
> 
> > Hello,
> > 
> > I've got a Logitech HD Webcam C525 using the uvcvideo module and I use
> > Linux 3.5 RC4. When this camera is connected to a USB2 port, it does not
> > work most of the time. However it does work fine when connected to a USB
> > 3 port. In Windows it works on both ports.
> 
> ...
> 
> > Complete dmesg and lsusb -v output about a failed attempt (on USB 2
> > port) and a succeeded attempt (on USB 3) can be found on
> > http://artipc10.vub.ac.be/~frederik/webcam/
> 
> A usbmon trace would be more helpful.  Or perhaps a pair of traces, one 
> for the USB-2 port and one for the USB-3 port.  See the instructions in 
> Documentation/usb/usbmon.txt.

OK, I created a usbmon trace both from the USB-2 port as the USB-3 port.
During the trace, I connected the USB webcam to the USB port and started
mplayer, which failed on USB-2 but worked fine on USB-3.

The two traces can be found here:
http://artipc10.vub.ac.be/~frederik/webcam/

Thanks!
-- 
Frederik Himpe <fhimpe@xxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html