[PATCH v5] gadget: fsl_mxc_udc: do not depend on grouped clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>

With the new common clock infrastructure, the following clocks should be 
used on i.MX drivers: ipg, per and ahb.

Adapt fsl_mxc_udc to follow this new behaviour to fix the following probe error:

Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
fsl-usb2-udc fsl-usb2-udc: clk_get("usb") failed
fsl-usb2-udc: probe of fsl-usb2-udc failed with error -2

Reported-by: Christoph Fritz <chf.fritz@xxxxxxxxxxxxxx>
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
Changes since v4:
- Avoid unbalanced clk_disable_uprepare calls for mxc_per_clk
Changes since v3:
- Remove some cpu_is_ functions
- Simplify error handling
Changes since v2:
- Fix one more error in the mxc_ipg_clk path
Changes since v1:
- Fix error path for mxc_ipg_clk
- Use clk_disable_unprepare in other locations as well
 drivers/usb/gadget/fsl_mxc_udc.c |   76 ++++++++++++++++----------------------
 1 files changed, 32 insertions(+), 44 deletions(-)

diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index dcbc0a2..adb6cb8 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -21,7 +21,8 @@
 #include <mach/hardware.h>
 
 static struct clk *mxc_ahb_clk;
-static struct clk *mxc_usb_clk;
+static struct clk *mxc_per_clk;
+static struct clk *mxc_ipg_clk;
 
 /* workaround ENGcm09152 for i.MX35 */
 #define USBPHYCTRL_OTGBASE_OFFSET	0x608
@@ -35,28 +36,31 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
 	pdata = pdev->dev.platform_data;
 
-	if (!cpu_is_mx35() && !cpu_is_mx25()) {
-		mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-		if (IS_ERR(mxc_ahb_clk))
-			return PTR_ERR(mxc_ahb_clk);
-
-		ret = clk_enable(mxc_ahb_clk);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-			goto eenahb;
-		}
+	mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+	if (IS_ERR(mxc_ipg_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
+		return PTR_ERR(mxc_ipg_clk);
 	}
 
-	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	mxc_usb_clk = clk_get(&pdev->dev, "usb");
-	if (IS_ERR(mxc_usb_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
-		ret = PTR_ERR(mxc_usb_clk);
-		goto egusb;
+	mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(mxc_ahb_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
+		return PTR_ERR(mxc_ahb_clk);
 	}
+
+	mxc_per_clk = devm_clk_get(&pdev->dev, "per");
+	if (IS_ERR(mxc_per_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
+		return PTR_ERR(mxc_per_clk);
+	}
+
+	clk_prepare_enable(mxc_ipg_clk);
+	clk_prepare_enable(mxc_ahb_clk);
+	clk_prepare_enable(mxc_per_clk);
 
+	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
 	if (!cpu_is_mx51()) {
-		freq = clk_get_rate(mxc_usb_clk);
+		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
 			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
@@ -65,24 +69,13 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 		}
 	}
 
-	ret = clk_enable(mxc_usb_clk);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
-		goto eenusb;
-	}
-
 	return 0;
 
-eenusb:
 eclkrate:
-	clk_put(mxc_usb_clk);
-	mxc_usb_clk = NULL;
-egusb:
-	if (!cpu_is_mx35())
-		clk_disable(mxc_ahb_clk);
-eenahb:
-	if (!cpu_is_mx35())
-		clk_put(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_ipg_clk);
+	clk_disable_unprepare(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_per_clk);
+	mxc_per_clk = NULL;
 	return ret;
 }
 
@@ -104,20 +97,15 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
-		clk_disable(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-		mxc_usb_clk = NULL;
+		clk_disable_unprepare(mxc_per_clk);
+		mxc_per_clk = NULL;
 	}
 }
 
 void fsl_udc_clk_release(void)
 {
-	if (mxc_usb_clk) {
-		clk_disable(mxc_usb_clk);
-		clk_put(mxc_usb_clk);
-	}
-	if (!cpu_is_mx35()) {
-		clk_disable(mxc_ahb_clk);
-		clk_put(mxc_ahb_clk);
-	}
+	if (mxc_per_clk)
+		clk_disable_unprepare(mxc_per_clk);
+	clk_disable_unprepare(mxc_ahb_clk);
+	clk_disable_unprepare(mxc_ipg_clk);
 }
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


B and H Foto and Electronics Corp.

[Linux Media]     [Video for Linux]     [Linux Input]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]     [More Archives]

Add to Google Powered by Linux