Re: [PATCH v2 07/12] ARM: imx6q: add config-on-boot gpios

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Shawn Guo,

> On 22 May 2012 11:25, Marek Vasut <marex@xxxxxxx> wrote:
> > Dear Shawn Guo,
> > 
> >> Apart from my comments below, we really need to know Rob and Grant's
> >> opinion on this.
> > 
> > Hm ... so why don't you actually write per-board driver ? :-) That'd
> > handle every single board very well, you'd configure the GPIOs there,
> > every single additional necessary thing that has to be configured would
> > sink there too etc.
> 
> I'm not completely sure about how the per-board driver looks like
> exactly.  Can you have some code demonstrating it?

Well such per-board driver would handle the board-specific init, like 
configuring the hub GPIO (as Richard has to do so on mx6q) or flick some other 
GPIOs, configure registers etc.

You can not depend on a bootloader to do such init for you, even though the 
bootloader should do it and should do it right.

> 
> Regards,
> Shawn

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux