[PATCH 03/10] usb: dwc3: gadget: rename phy_power() to phy_suspend()

[Felipe Balbi <balbi@xxxxxx>]

From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>

those two functions don't power PHYs, they simply
put them in suspend state. Rename to reflect better
what functions actually do.

Signed-off-by: Paul Zimmerman <paulz@xxxxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
 drivers/usb/dwc3/gadget.c |   32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 98a1dbd..6f72e09 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1884,30 +1884,30 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 	dwc->setup_packet_pending = false;
 }
 
-static void dwc3_gadget_usb3_phy_power(struct dwc3 *dwc, int on)
+static void dwc3_gadget_usb3_phy_suspend(struct dwc3 *dwc, int suspend)
 {
 	u32			reg;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
-	if (on)
-		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
-	else
+	if (suspend)
 		reg |= DWC3_GUSB3PIPECTL_SUSPHY;
+	else
+		reg &= ~DWC3_GUSB3PIPECTL_SUSPHY;
 
 	dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg);
 }
 
-static void dwc3_gadget_usb2_phy_power(struct dwc3 *dwc, int on)
+static void dwc3_gadget_usb2_phy_suspend(struct dwc3 *dwc, int suspend)
 {
 	u32			reg;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 
-	if (on)
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-	else
+	if (suspend)
 		reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+	else
+		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 
 	dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 }
@@ -1952,9 +1952,9 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 	/* after reset -> Default State */
 	dwc->dev_state = DWC3_DEFAULT_STATE;
 
-	/* Enable PHYs */
-	dwc3_gadget_usb2_phy_power(dwc, true);
-	dwc3_gadget_usb3_phy_power(dwc, true);
+	/* Resume PHYs */
+	dwc3_gadget_usb2_phy_suspend(dwc, false);
+	dwc3_gadget_usb3_phy_suspend(dwc, false);
 
 	if (dwc->gadget.speed != USB_SPEED_UNKNOWN)
 		dwc3_disconnect_gadget(dwc);
@@ -2000,16 +2000,16 @@ static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 }
 
-static void dwc3_gadget_disable_phy(struct dwc3 *dwc, u8 speed)
+static void dwc3_gadget_phy_suspend(struct dwc3 *dwc, u8 speed)
 {
 	switch (speed) {
 	case USB_SPEED_SUPER:
-		dwc3_gadget_usb2_phy_power(dwc, false);
+		dwc3_gadget_usb2_phy_suspend(dwc, true);
 		break;
 	case USB_SPEED_HIGH:
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		dwc3_gadget_usb3_phy_power(dwc, false);
+		dwc3_gadget_usb3_phy_suspend(dwc, true);
 		break;
 	}
 }
@@ -2072,8 +2072,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		break;
 	}
 
-	/* Disable unneded PHY */
-	dwc3_gadget_disable_phy(dwc, dwc->gadget.speed);
+	/* Suspend unneded PHY */
+	dwc3_gadget_phy_suspend(dwc, dwc->gadget.speed);
 
 	dep = dwc->eps[0];
 	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL);
-- 
1.7.10

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html