[PATCH v3 1/3] USB: Add driver for NXP ISP1301 USB transceiver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


This very-lowlevel driver registers the NXP ISP1301 chip via the I2C subsystem.
The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and
isp1301_omap.

Following patches let the respective USB host and gadget drivers use this
driver, instead of duplicating ISP1301 handling.

Signed-off-by: Roland Stigge <stigge@xxxxxxxxx>
Acked-by: Arnd Bergmann <arnd@xxxxxxxx>

---

Applies to v3.4-rc3

Changes since v2:
* Moved to drivers/usb/phy/
* Support multiple ISP1301 chips by referencing via DT phandle "transceiver"
* Added DT documentation

Thanks to Arnd Bergmann for reviewing!

 Documentation/devicetree/bindings/usb/isp1301.txt |   25 ++++++
 drivers/usb/Kconfig                               |    2 
 drivers/usb/Makefile                              |    1 
 drivers/usb/phy/Kconfig                           |   17 ++++
 drivers/usb/phy/Makefile                          |    7 +
 drivers/usb/phy/isp1301.c                         |   76 +++++++++++++++++++
 include/linux/usb/isp1301.h                       |   84 ++++++++++++++++++++++
 7 files changed, 212 insertions(+)

--- /dev/null
+++ linux-2.6/Documentation/devicetree/bindings/usb/isp1301.txt
@@ -0,0 +1,25 @@
+* NXP ISP1301 USB transceiver
+
+Required properties:
+- compatible: must be "nxp,isp1301"
+- reg: I2C address of the ISP1301 device
+
+Optional properties of devices using ISP1301:
+- transceiver: phandle of isp1301 - this helps the ISP1301 driver to find the
+               ISP1301 instance associated with the respective USB driver
+
+Example:
+
+	isp1301: usb-transceiver@2c {
+		compatible = "nxp,isp1301";
+		reg = <0x2c>;
+	};
+
+	usbd@31020000 {
+		compatible = "nxp,lpc32xx-udc";
+		reg = <0x31020000 0x300>;
+		interrupt-parent = <&mic>;
+		interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>;
+		transceiver = <&isp1301>;
+		status = "okay";
+	};
--- linux-2.6.orig/drivers/usb/Kconfig
+++ linux-2.6/drivers/usb/Kconfig
@@ -177,6 +177,8 @@ source "drivers/usb/serial/Kconfig"
 
 source "drivers/usb/misc/Kconfig"
 
+source "drivers/usb/phy/Kconfig"
+
 source "drivers/usb/atm/Kconfig"
 
 source "drivers/usb/gadget/Kconfig"
--- linux-2.6.orig/drivers/usb/Makefile
+++ linux-2.6/drivers/usb/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_USB_MICROTEK)	+= image/
 obj-$(CONFIG_USB_SERIAL)	+= serial/
 
 obj-$(CONFIG_USB)		+= misc/
+obj-$(CONFIG_USB)		+= phy/
 obj-$(CONFIG_EARLY_PRINTK_DBGP)	+= early/
 
 obj-$(CONFIG_USB_ATM)		+= atm/
--- /dev/null
+++ linux-2.6/drivers/usb/phy/Kconfig
@@ -0,0 +1,17 @@
+#
+# Physical Layer USB driver configuration
+#
+comment "USB Physical Layer drivers"
+	depends on USB
+
+config USB_ISP1301
+	tristate "NXP ISP1301 USB transceiver support"
+	depends on USB
+	depends on I2C
+	help
+	  Say Y here to add support for the NXP ISP1301 USB transceiver driver.
+	  This chip is typically used as USB transceiver for USB host, gadget
+	  and OTG drivers (to be selected separately).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called isp1301.
--- /dev/null
+++ linux-2.6/drivers/usb/phy/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for physical layer USB drivers
+#
+
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+
+obj-$(CONFIG_USB_ISP1301)		+= isp1301.o
--- /dev/null
+++ linux-2.6/drivers/usb/phy/isp1301.c
@@ -0,0 +1,76 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * Author: Roland Stigge <stigge@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+
+#define DRV_NAME		"isp1301"
+#define DRV_VERSION		"0.1.0"
+
+#define ISP1301_I2C_ADDR	0x2C
+
+static const unsigned short normal_i2c[] = {
+	ISP1301_I2C_ADDR, ISP1301_I2C_ADDR + 1, I2C_CLIENT_END
+};
+
+static const struct i2c_device_id isp1301_id[] = {
+	{ "isp1301", 0 },
+	{ }
+};
+
+static struct i2c_client *isp1301_i2c_client;
+
+static int match(struct device *dev, void *data)
+{
+	struct device_node *node = (struct device_node *)data;
+	return dev->of_node == node ? 1 : 0;
+}
+
+struct i2c_client *isp1301_get_client(struct device_node *node)
+{
+	if (node) { /* reference of ISP1301 I2C node via  DT */
+		struct device *dev = bus_find_device(&i2c_bus_type, NULL,
+						     node, match);
+		return to_i2c_client(dev);
+	} else { /* non-DT: only one ISP1301 chip supported */
+		return isp1301_i2c_client;
+	}
+}
+EXPORT_SYMBOL(isp1301_get_client);
+
+static int isp1301_probe(struct i2c_client *client,
+			 const struct i2c_device_id *i2c_id)
+{
+	isp1301_i2c_client = client;
+	return 0;
+}
+
+static int isp1301_remove(struct i2c_client *client)
+{
+	return 0;
+}
+
+static struct i2c_driver isp1301_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = isp1301_probe,
+	.remove = isp1301_remove,
+	.id_table = isp1301_id,
+};
+
+module_i2c_driver(isp1301_driver);
+
+MODULE_AUTHOR("Roland Stigge <stigge@xxxxxxxxx>");
+MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
--- /dev/null
+++ linux-2.6/include/linux/usb/isp1301.h
@@ -0,0 +1,84 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge <stigge@xxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#ifndef __LINUX_USB_ISP1301_H
+#define __LINUX_USB_ISP1301_H
+
+#include <linux/of.h>
+
+/* I2C Register definitions: */
+
+#define ISP1301_I2C_MODE_CONTROL_1	0x04	/* u8 read, set, +1 clear */
+
+#define MC1_SPEED_REG			(1 << 0)
+#define MC1_SUSPEND_REG			(1 << 1)
+#define MC1_DAT_SE0			(1 << 2)
+#define MC1_TRANSPARENT			(1 << 3)
+#define MC1_BDIS_ACON_EN		(1 << 4)
+#define MC1_OE_INT_EN			(1 << 5)
+#define MC1_UART_EN			(1 << 6)
+#define MC1_MASK			0x7f
+
+#define ISP1301_I2C_MODE_CONTROL_2	0x12	/* u8 read, set, +1 clear */
+
+#define MC2_GLOBAL_PWR_DN		(1 << 0)
+#define MC2_SPD_SUSP_CTRL		(1 << 1)
+#define MC2_BI_DI			(1 << 2)
+#define MC2_TRANSP_BDIR0		(1 << 3)
+#define MC2_TRANSP_BDIR1		(1 << 4)
+#define MC2_AUDIO_EN			(1 << 5)
+#define MC2_PSW_EN			(1 << 6)
+#define MC2_EN2V7			(1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_1	0x06	/* u8 read, set, +1 clear */
+
+#define OTG1_DP_PULLUP			(1 << 0)
+#define OTG1_DM_PULLUP			(1 << 1)
+#define OTG1_DP_PULLDOWN		(1 << 2)
+#define OTG1_DM_PULLDOWN		(1 << 3)
+#define OTG1_ID_PULLDOWN		(1 << 4)
+#define OTG1_VBUS_DRV			(1 << 5)
+#define OTG1_VBUS_DISCHRG		(1 << 6)
+#define OTG1_VBUS_CHRG			(1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_2	0x10	/* u8 readonly */
+
+#define OTG_B_SESS_END			(1 << 6)
+#define OTG_B_SESS_VLD			(1 << 7)
+
+#define ISP1301_I2C_INTERRUPT_SOURCE	0x8
+#define ISP1301_I2C_INTERRUPT_LATCH	0xA
+#define ISP1301_I2C_INTERRUPT_FALLING	0xC
+#define ISP1301_I2C_INTERRUPT_RISING	0xE
+
+#define INT_VBUS_VLD			(1 << 0)
+#define INT_SESS_VLD			(1 << 1)
+#define INT_DP_HI			(1 << 2)
+#define INT_ID_GND			(1 << 3)
+#define INT_DM_HI			(1 << 4)
+#define INT_ID_FLOAT			(1 << 5)
+#define INT_BDIS_ACON			(1 << 6)
+#define INT_CR_INT			(1 << 7)
+
+#define ISP1301_I2C_REG_CLEAR_ADDR	1	/* Register Address Modifier */
+
+struct i2c_client *isp1301_get_client(struct device_node *node);
+
+#endif /* __LINUX_USB_ISP1301_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


B and H Foto and Electronics Corp.

[Linux Media]     [Video for Linux]     [Linux Input]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]     [More Archives]

Add to Google Powered by Linux