[PATCH 10/10] usb: host: mips: sead3: USB Host controller support for SEAD-3 platform.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


From: "Steven J. Hill" <sjhill@xxxxxxxx>

Add EHCI driver for MIPS SEAD-3 development platform.

Signed-off-by: Chris Dearman <chris@xxxxxxxx>
Signed-off-by: Steven J. Hill <sjhill@xxxxxxxx>
---
 drivers/usb/host/Kconfig      |    4 +-
 drivers/usb/host/ehci-hcd.c   |    5 +
 drivers/usb/host/ehci-sead3.c |  299 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 306 insertions(+), 2 deletions(-)
 create mode 100644 drivers/usb/host/ehci-sead3.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index f788eb8..db29a9f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -110,13 +110,13 @@ config USB_EHCI_BIG_ENDIAN_MMIO
 	depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
 				    ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
 				    PPC_MPC512x || CPU_CAVIUM_OCTEON || \
-				    PMC_MSP || SPARC_LEON)
+				    PMC_MSP || SPARC_LEON || MIPS_SEAD3)
 	default y
 
 config USB_EHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-				    PPC_MPC512x || PMC_MSP || SPARC_LEON)
+				    PPC_MPC512x || PMC_MSP || SPARC_LEON || MIPS_SEAD3)
 	default y
 
 config XPS_USB_HCD_XILINX
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index aede637..30563ff 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1371,6 +1371,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_ls1x_driver
 #endif
 
+#ifdef CONFIG_MIPS_SEAD3
+#include "ehci-sead3.c"
+#define	PLATFORM_DRIVER		ehci_hcd_mips_driver
+#endif
+
 #ifdef CONFIG_USB_EHCI_HCD_PLATFORM
 #include "ehci-platform.c"
 #define PLATFORM_DRIVER		ehci_platform_driver
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
new file mode 100644
index 0000000..743a0c1
--- /dev/null
+++ b/drivers/usb/host/ehci-sead3.c
@@ -0,0 +1,299 @@
+/*
+ * MIPS CI13320A EHCI Host Controller driver
+ * Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@xxxxxxx>
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_PM
+static void mips_start_ehc(void)
+{
+	pr_debug("mips_start_ehc\n");
+}
+#endif
+
+static void mips_stop_ehc(void)
+{
+	pr_debug("mips_start_ehc\n");
+}
+
+static int mips_run(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	u32 temp;
+
+	temp = ehci_reset(ehci);
+	if (temp != 0) {
+		ehci_mem_cleanup(ehci);
+		return temp;
+	}
+
+	return ehci_run(hcd);
+}
+
+const struct hc_driver ehci_mips_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "MIPS EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 *
+	 */
+	.reset			= ehci_init,
+	.start			= mips_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+};
+
+static int ehci_hcd_mips_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+	hcd = usb_create_hcd(&ehci_mips_hc_driver, &pdev->dev, "MIPS");
+	if (!hcd)
+		return -ENOMEM;
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_debug("request_mem_region failed");
+		ret = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_debug("ioremap failed");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	hcd->has_tt = 1;
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+		HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase));
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+	/* SEAD-3 EHCI matches CPU endianness. */
+#ifdef __BIG_ENDIAN
+	ehci->big_endian_mmio = 1;
+	ehci->big_endian_desc = 1;
+#endif
+
+	/* Set burst length to 16 words */
+	/* FIXME: should be tunable */
+	ehci_writel(ehci, 0x1010, &ehci->regs->reserved[1]);
+
+	ret = usb_add_hcd(hcd, pdev->resource[1].start,
+			  IRQF_DISABLED | IRQF_SHARED);
+	if (ret == 0) {
+		platform_set_drvdata(pdev, hcd);
+		return ret;
+	}
+
+	mips_stop_ehc();
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int ehci_hcd_mips_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	mips_stop_ehc();
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ehci_hcd_mips_drv_suspend(struct platform_device *pdev,
+					pm_message_t message)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	unsigned long flags;
+	int rc;
+
+	return 0;
+	rc = 0;
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(10);
+
+	/* Root hub was already suspended. Disable irq emission and
+	 * mark HW unaccessible, bail out if RH has been resumed. Use
+	 * the spinlock to properly synchronize with possible pending
+	 * RH suspend or resume activity.
+	 *
+	 * This is still racy as hcd->state is manipulated outside of
+	 * any locks =P But that will be a different fix.
+	 */
+	spin_lock_irqsave(&ehci->lock, flags);
+	if (hcd->state != HC_STATE_SUSPENDED) {
+		rc = -EINVAL;
+		goto bail;
+	}
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
+
+	/* make sure snapshot being resumed re-enumerates everything */
+	if (message.event == PM_EVENT_PRETHAW) {
+		ehci_halt(ehci);
+		ehci_reset(ehci);
+	}
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	mips_stop_ehc();
+
+bail:
+	spin_unlock_irqrestore(&ehci->lock, flags);
+
+	/* could save FLADJ in case of Vaux power loss */
+	/* ... we'd only use it to handle clock skew   */
+
+	return rc;
+}
+
+
+static int ehci_hcd_mips_drv_resume(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+	mips_start_ehc();
+
+	/* maybe restore FLADJ */
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(100);
+
+	/* Mark hardware accessible again as we are out of D3 state by now */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/* If CF is still set, we maintained PCI Vaux power.
+	 * Just undo the effect of ehci_pci_suspend().
+	 */
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+		int	mask = INTR_MASK;
+
+		if (!hcd->self.root_hub->do_remote_wakeup)
+			mask &= ~STS_PCD;
+		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+		ehci_readl(ehci, &ehci->regs->intr_enable);
+		return 0;
+	}
+
+	ehci_dbg(ehci, "lost power, restarting\n");
+	usb_root_hub_lost_power(hcd->self.root_hub);
+
+	/* Else reset, to cope with power loss or flush-to-storage
+	 * style "resume" having let BIOS kick in during reboot.
+	 */
+	(void) ehci_halt(ehci);
+	(void) ehci_reset(ehci);
+
+	/* emptying the schedule aborts any urbs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->reclaim)
+		end_unlink_async(ehci);
+	ehci_work(ehci);
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	/* here we "know" root ports should always stay powered */
+	ehci_port_power(ehci, 1);
+
+	hcd->state = HC_STATE_SUSPENDED;
+
+	return 0;
+}
+
+#else
+#define ehci_hcd_mips_drv_suspend NULL
+#define ehci_hcd_mips_drv_resume NULL
+#endif
+
+static struct platform_driver ehci_hcd_mips_driver = {
+	.probe		= ehci_hcd_mips_drv_probe,
+	.remove		= ehci_hcd_mips_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.suspend	= ehci_hcd_mips_drv_suspend,
+	.resume		= ehci_hcd_mips_drv_resume,
+	.driver = {
+		.name	= "sead3-ehci",
+		.owner	= THIS_MODULE,
+	}
+};
+
+MODULE_ALIAS("platform:sead3-ehci");
-- 
1.7.9.6

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


B and H Foto and Electronics Corp.

[Linux Media]     [Video for Linux]     [Linux Input]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]    [Free Online Dating]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]     [More Archives]

Add to Google Powered by Linux