Hans-Jürgen Koch wrote:> Am Thu, 31 Jan 2008 14:14:53 +0100> schrieb Matteo Vit <matteo.vit@xxxxxxx>:> >> Hans-Jürgen Koch wrote:>>> I've been asked if an NXP ISP1362 controller is supported. During my>>> research I became a bit confused. There are lots of mails in the>>> archives talking about 1362 support, many of them 3 years old. But>>> in current mainline I only see isp116x-hcd.c. Does it also support>>> isp1362? Or is it supported by another driver? Or not at all?>>>>>> Thanks,>>> Hans>>>>> Hi,>> the isp1362 is used in one of the Blackfin evaluation board > > yes, e.g. on the BF537. But if you look into> arch/blackfin/mach-bf537/boards/stamp.c, you find that it includes> linux/usb/isp1362.h - a file that doesn't exist in mainline.> >> and you can find there the device driver.> > You mean that isp1362-hcd stuff on sourceforge? Well... http://blackfin.uclinux.org/gf/project/uclinux-dist/ > >> It works for me, but not with all>> the USB devices. For example it works only with some USB keys. In any>> case that chip is quite old, try to find something new (and better>> supported).> > Unfortunately, that's not my choice. The hardware is as it is... :( > > OK, seems to be a bit of work to get this running on a recent kernel. I'm using the driver with a 2.6.20 kernel, you have just to modify the low level I/O functions. I don't know what is the effort for the mainline kernel. The blackfin/uclinux driver work as is with little endian architecture. If you have to use it with a big endian architecture I can send you a patch. -- Matteo VIT DAVE Srl - Electronics System Housevia Forniz 2/1 33080 Porcia (PN) - ItalyTelephone: +39.0434.921215Telefax: +39.0434.1994030web: www.dave.eue-mail: matteo.vit@xxxxxxxxxx to reach us: http://mail.map24.com/dave -------------------------------------------------------------------------This SF.net email is sponsored by: MicrosoftDefy all challenges. Microsoft(R) Visual Studio 2008.http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/_______________________________________________linux-usb-devel@xxxxxxxxxxxxxxxxxxxxxxx unsubscribe, use the last form field at:https://lists.sourceforge.net/lists/listinfo/linux-usb-devel