Am Thu, 31 Jan 2008 14:14:53 +0100schrieb Matteo Vit <matteo.vit@xxxxxxx>:
> Hans-Jürgen Koch wrote:> > I've been asked if an NXP ISP1362 controller is supported. During my> > research I became a bit confused. There are lots of mails in the> > archives talking about 1362 support, many of them 3 years old. But> > in current mainline I only see isp116x-hcd.c. Does it also support> > isp1362? Or is it supported by another driver? Or not at all?> > > > Thanks,> > Hans> > > > Hi,> the isp1362 is used in one of the Blackfin evaluation board
yes, e.g. on the BF537. But if you look intoarch/blackfin/mach-bf537/boards/stamp.c, you find that it includeslinux/usb/isp1362.h - a file that doesn't exist in mainline.
> and you can find there the device driver.
You mean that isp1362-hcd stuff on sourceforge? Well...
> It works for me, but not with all> the USB devices. For example it works only with some USB keys. In any> case that chip is quite old, try to find something new (and better> supported).
Unfortunately, that's not my choice. The hardware is as it is...
OK, seems to be a bit of work to get this running on a recent kernel.
Thanks for your help,Hans
-------------------------------------------------------------------------This SF.net email is sponsored by: MicrosoftDefy all challenges. Microsoft(R) Visual Studio 2008.http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/_______________________________________________linux-usb-devel@xxxxxxxxxxxxxxxxxxxxxxx unsubscribe, use the last form field at:https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
[Home]
[Video for Linux]
[Photo]
[Yosemite Forum]
[Yosemite Photos]
[Video Projectors]
[PDAs]
[Hacking TiVo]
[Linux Kernel]
[Linux SCSI]
[XFree86]
[Devices]
[Big List of Linux Books]
[Free Dating]