Re: [Fwd: USB EHCI/OHCI Problem with IXP4xx]

[Stefan Althoefer <as@xxxxxxx>]

Alan Stern schrieb:
> On Tue, 11 Dec 2007, Stefan Althoefer wrote:
> 
>> Sorry if this is duplicated, I sent it linux-usb@xxxxxxxxxxxxxxx but
>> it did not appear in the mailing list archives.
>>
>> -------- Original-Nachricht --------
>> Hi,
>>
>> I'm recognizing a problem with USB EHCI/OCHI driver in kernel 2.6.20.3.
>> I'm running this on a special system, and I haven't yet had the time
>> to test a more recent kernel.
>>
>> Platform        : ARM  (Janz Automationssystem AG: emPC-A400)
>> Processor       : XScale-IXP42x Family rev 1 (v5l)
>> USB             : integrated ISP1562BE and add-on board with NEC 720101,
>>                    both showing the errors.
>> Memory          : 128MByte
>>                    THE PROBLEM DID NOT YET APPEAR WHEN ONLY 64MBYTE ARE USED
>>                    (with mem=64M kernel parameter).
>> USB device      : SanDisk memory stick USB2.0
> 
> I believe this problem was recognized and fixed some time after 2.6.20.  
> Try using a more recent kernel, like 2.6.23.
> 
> Alan Stern
> 
> 

I tested with 2.6.22.9 and 2.6.23.9 and with both I still see the error.

Stefan Althöfer


-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel