Hi,
I may have found a usb-related problem in 2.6.24-rc4. What I am seeing is that
although usbfs is mounted on /proc/bus/usb, the directory is empty. In -rc3,
the directory is populated. The result of this is that sane doesn't find my
usb-attached scanner with -rc4.
My other usb-attached devices (mouse, keyboard, pen drive, printer) seem to be
working fine.
config -rc4 and bootlogs from -rc3 and -rc4 are attached.
I'm not subscribed, so please cc me in any reply
Chris
--
Beer is proof that God loves us and wants us to be happy - Benjamin Franklin
Dec 7 10:49:05 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started.
Dec 7 10:49:05 upstairs kernel: Inspecting /boot/System.map-2.6.24-rc3
Dec 7 10:49:06 upstairs kernel: Loaded 25641 symbols from /boot/System.map-2.6.24-rc3.
Dec 7 10:49:06 upstairs kernel: Symbols match kernel version 2.6.24.
Dec 7 10:49:06 upstairs kernel: No module symbols loaded - kernel modules not enabled.
Dec 7 10:49:06 upstairs kernel: 2 14 15)
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Dec 7 10:49:06 upstairs kernel: ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BD, should be B0 [20070126]
Dec 7 10:49:06 upstairs kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Dec 7 10:49:06 upstairs kernel: pnp: PnP ACPI init
Dec 7 10:49:06 upstairs kernel: ACPI: bus type pnp registered
Dec 7 10:49:06 upstairs kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
Dec 7 10:49:06 upstairs kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Dec 7 10:49:06 upstairs kernel: pnp: PnP ACPI: found 13 devices
Dec 7 10:49:06 upstairs kernel: ACPI: ACPI bus type pnp unregistered
Dec 7 10:49:06 upstairs kernel: SCSI subsystem initialized
Dec 7 10:49:06 upstairs kernel: libata version 3.00 loaded.
Dec 7 10:49:06 upstairs kernel: usbcore: registered new interface driver usbfs
Dec 7 10:49:06 upstairs kernel: usbcore: registered new interface driver hub
Dec 7 10:49:06 upstairs kernel: usbcore: registered new device driver usb
Dec 7 10:49:06 upstairs kernel: PCI: Using ACPI for IRQ routing
Dec 7 10:49:06 upstairs kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Dec 7 10:49:06 upstairs kernel: Time: tsc clocksource has been installed.
Dec 7 10:49:06 upstairs kernel: pnp: the driver 'system' has been registered
Dec 7 10:49:06 upstairs kernel: system 00:07: ioport range 0x290-0x297 has been reserved
Dec 7 10:49:06 upstairs kernel: system 00:07: driver attached
Dec 7 10:49:06 upstairs kernel: system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
Dec 7 10:49:06 upstairs kernel: system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
Dec 7 10:49:06 upstairs kernel: system 00:08: driver attached
Dec 7 10:49:06 upstairs kernel: system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
Dec 7 10:49:06 upstairs kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Dec 7 10:49:06 upstairs kernel: system 00:09: driver attached
Dec 7 10:49:06 upstairs kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Dec 7 10:49:06 upstairs kernel: system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
Dec 7 10:49:06 upstairs kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Dec 7 10:49:06 upstairs kernel: system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
Dec 7 10:49:06 upstairs kernel: system 00:0c: driver attached
Dec 7 10:49:06 upstairs kernel: PCI: Bridge: 0000:00:01.0
Dec 7 10:49:06 upstairs kernel: IO window: d000-dfff
Dec 7 10:49:06 upstairs kernel: MEM window: fbe00000-fbefffff
Dec 7 10:49:06 upstairs kernel: PREFETCH window: f0000000-faffffff
Dec 7 10:49:06 upstairs kernel: PCI: Bridge: 0000:00:1e.0
Dec 7 10:49:06 upstairs kernel: IO window: e000-efff
Dec 7 10:49:06 upstairs kernel: MEM window: fbf00000-fbffffff
Dec 7 10:49:06 upstairs kernel: PREFETCH window: disabled.
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Dec 7 10:49:06 upstairs kernel: NET: Registered protocol family 2
Dec 7 10:49:06 upstairs kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 7 10:49:06 upstairs kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 7 10:49:06 upstairs kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Dec 7 10:49:06 upstairs kernel: TCP: Hash tables configured (established 131072 bind 65536)
Dec 7 10:49:06 upstairs kernel: TCP reno registered
Dec 7 10:49:06 upstairs kernel: highmem bounce pool size: 64 pages
Dec 7 10:49:06 upstairs kernel: io scheduler noop registered
Dec 7 10:49:06 upstairs kernel: io scheduler cfq registered (default)
Dec 7 10:49:06 upstairs kernel: Boot video device is 0000:01:00.0
Dec 7 10:49:06 upstairs kernel: input: Power Button (FF) as /devices/virtual/input/input0
Dec 7 10:49:06 upstairs kernel: ACPI: Power Button (FF) [PWRF]
Dec 7 10:49:06 upstairs kernel: input: Power Button (CM) as /devices/virtual/input/input1
Dec 7 10:49:06 upstairs kernel: ACPI: Power Button (CM) [PWRB]
Dec 7 10:49:06 upstairs kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Dec 7 10:49:06 upstairs kernel: ACPI Exception (processor_core-0813): AE_NOT_FOUND, Processor Device is not present [20070126]
Dec 7 10:49:06 upstairs kernel: ACPI Exception (processor_core-0813): AE_NOT_FOUND, Processor Device is not present [20070126]
Dec 7 10:49:06 upstairs kernel: Real Time Clock Driver v1.12ac
Dec 7 10:49:06 upstairs kernel: Linux agpgart interface v0.102
Dec 7 10:49:06 upstairs kernel: agpgart: Detected an Intel 865 Chipset.
Dec 7 10:49:06 upstairs kernel: agpgart: AGP aperture is 128M @ 0xe8000000
Dec 7 10:49:06 upstairs kernel: [drm] Initialized drm 1.1.0 20060810
Dec 7 10:49:06 upstairs kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Dec 7 10:49:06 upstairs kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 7 10:49:06 upstairs kernel: pnp: the driver 'serial' has been registered
Dec 7 10:49:06 upstairs kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 7 10:49:06 upstairs kernel: serial 00:0b: driver attached
Dec 7 10:49:06 upstairs kernel: 8139too Fast Ethernet driver 0.9.28
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 16
Dec 7 10:49:06 upstairs kernel: eth0: RealTek RTL8139 at 0xf8816800, 00:17:31:a9:1d:48, IRQ 16
Dec 7 10:49:06 upstairs kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Dec 7 10:49:06 upstairs kernel: ata_piix 0000:00:1f.1: version 2.12
Dec 7 10:49:06 upstairs kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Dec 7 10:49:06 upstairs kernel: scsi0 : ata_piix
Dec 7 10:49:06 upstairs kernel: scsi1 : ata_piix
Dec 7 10:49:06 upstairs kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Dec 7 10:49:06 upstairs kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Dec 7 10:49:06 upstairs kernel: ata1.00: ATA-7: MAXTOR STM3250820A, 3.AAE, max UDMA/100
Dec 7 10:49:06 upstairs kernel: ata1.00: 488397168 sectors, multi 16: LBA48
Dec 7 10:49:06 upstairs kernel: ata1.01: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133
Dec 7 10:49:06 upstairs kernel: ata1.01: 320173056 sectors, multi 16: LBA48
Dec 7 10:49:06 upstairs kernel: ata1.00: configured for UDMA/100
Dec 7 10:49:06 upstairs kernel: ata1.01: configured for UDMA/100
Dec 7 10:49:06 upstairs kernel: Switched to NOHz mode on CPU #1
Dec 7 10:49:06 upstairs kernel: Switched to NOHz mode on CPU #0
Dec 7 10:49:06 upstairs kernel: ata2.00: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66
Dec 7 10:49:06 upstairs kernel: ata2.01: ATAPI: PHILIPS DVDR1628P1, Q2.2, max UDMA/33
Dec 7 10:49:06 upstairs kernel: ata2.00: limited to UDMA/33 due to 40-wire cable
Dec 7 10:49:06 upstairs kernel: ata2.00: configured for UDMA/33
Dec 7 10:49:06 upstairs kernel: ata2.01: configured for UDMA/33
Dec 7 10:49:06 upstairs kernel: scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:49:06 upstairs kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Dec 7 10:49:06 upstairs kernel: scsi 0:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:49:06 upstairs kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
Dec 7 10:49:06 upstairs kernel: sdb2: <bsd: sdb10 sdb11 sdb12 sdb13 sdb14 >
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Dec 7 10:49:06 upstairs kernel: scsi 1:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS2 PQ: 0 ANSI: 5
Dec 7 10:49:06 upstairs kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Dec 7 10:49:06 upstairs kernel: Uniform CD-ROM driver Revision: 3.20
Dec 7 10:49:06 upstairs kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Dec 7 10:49:06 upstairs kernel: scsi 1:0:1:0: CD-ROM PHILIPS DVDR1628P1 Q2.2 PQ: 0 ANSI: 5
Dec 7 10:49:06 upstairs kernel: sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Dec 7 10:49:06 upstairs kernel: sr 1:0:1:0: Attached scsi CD-ROM sr1
Dec 7 10:49:06 upstairs kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Dec 7 10:49:06 upstairs kernel: scsi2 : ata_piix
Dec 7 10:49:06 upstairs kernel: scsi3 : ata_piix
Dec 7 10:49:06 upstairs kernel: ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 17
Dec 7 10:49:06 upstairs kernel: ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 17
Dec 7 10:49:06 upstairs kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133
Dec 7 10:49:06 upstairs kernel: ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
Dec 7 10:49:06 upstairs kernel: ata3.00: configured for UDMA/133
Dec 7 10:49:06 upstairs kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:49:06 upstairs kernel: sdc: sdc1 sdc2 sdc3
Dec 7 10:49:06 upstairs kernel: sdc3: <solaris: [s0] sdc5 [s1] sdc6 [s2] sdc7 [s7] sdc8 [s8] sdc9 [s9] sdc10 >
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 7 10:49:06 upstairs kernel: pnp: the driver 'i8042 kbd' has been registered
Dec 7 10:49:06 upstairs kernel: pnp: the driver 'i8042 aux' has been registered
Dec 7 10:49:06 upstairs kernel: i8042 aux 00:0a: driver attached
Dec 7 10:49:06 upstairs kernel: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Dec 7 10:49:06 upstairs kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
Dec 7 10:49:06 upstairs kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 7 10:49:06 upstairs kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 7 10:49:06 upstairs kernel: mice: PS/2 mouse device common for all mice
Dec 7 10:49:06 upstairs kernel: Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Oct 23 06:09:18 2007 UTC).
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
Dec 7 10:49:06 upstairs kernel: intel8x0_measure_ac97_clock: measured 50832 usecs
Dec 7 10:49:06 upstairs kernel: intel8x0: clocking to 48000
Dec 7 10:49:06 upstairs kernel: ALSA device list:
Dec 7 10:49:06 upstairs kernel: #0: Intel ICH5 with ALC655 at irq 18
Dec 7 10:49:06 upstairs kernel: TCP cubic registered
Dec 7 10:49:06 upstairs kernel: NET: Registered protocol family 1
Dec 7 10:49:06 upstairs kernel: NET: Registered protocol family 15
Dec 7 10:49:06 upstairs kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Dec 7 10:49:06 upstairs kernel: Starting balanced_irq
Dec 7 10:49:06 upstairs kernel: Using IPI No-Shortcut mode
Dec 7 10:49:06 upstairs kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
Dec 7 10:49:06 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:49:06 upstairs kernel: VFS: Mounted root (ext3 filesystem) readonly.
Dec 7 10:49:06 upstairs kernel: Freeing unused kernel memory: 180k freed
Dec 7 10:49:06 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:49:06 upstairs kernel: EXT3 FS on sdc1, internal journal
Dec 7 10:49:06 upstairs kernel: USB Universal Host Controller Interface driver v3.0
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000b800
Dec 7 10:49:06 upstairs kernel: usb usb1: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 1-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 1-0:1.0: 2 ports detected
Dec 7 10:49:06 upstairs kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 7 10:49:06 upstairs kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
Dec 7 10:49:06 upstairs kernel: sr 1:0:0:0: Attached scsi generic sg2 type 5
Dec 7 10:49:06 upstairs kernel: sr 1:0:1:0: Attached scsi generic sg3 type 5
Dec 7 10:49:06 upstairs kernel: sd 2:0:0:0: Attached scsi generic sg4 type 0
Dec 7 10:49:06 upstairs kernel: pnp: the driver 'parport_pc' has been registered
Dec 7 10:49:06 upstairs kernel: parport_pc 00:06: reported by Plug and Play ACPI
Dec 7 10:49:06 upstairs kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Dec 7 10:49:06 upstairs kernel: parport_pc 00:06: driver attached
Dec 7 10:49:06 upstairs kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c000
Dec 7 10:49:06 upstairs kernel: usb usb2: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 2-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 2-0:1.0: 2 ports detected
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000c400
Dec 7 10:49:06 upstairs kernel: usb usb3: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 3-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 3-0:1.0: 2 ports detected
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Dec 7 10:49:06 upstairs kernel: uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000c800
Dec 7 10:49:06 upstairs kernel: usb usb4: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 4-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 4-0:1.0: 2 ports detected
Dec 7 10:49:06 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Dec 7 10:49:06 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 21
Dec 7 10:49:06 upstairs kernel: ohci_hcd 0000:02:0a.0: OHCI Host Controller
Dec 7 10:49:06 upstairs kernel: ohci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 5
Dec 7 10:49:06 upstairs kernel: ohci_hcd 0000:02:0a.0: irq 21, io mem 0xfbffd000
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
Dec 7 10:49:06 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:00:1d.7: debug port 1
Dec 7 10:49:06 upstairs kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfbdffc00
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Dec 7 10:49:06 upstairs kernel: usb usb6: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 6-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 6-0:1.0: 8 ports detected
Dec 7 10:49:06 upstairs kernel: usb 1-2: USB disconnect, address 2
Dec 7 10:49:06 upstairs kernel: usb usb5: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 5-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 5-0:1.0: 3 ports detected
Dec 7 10:49:06 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 3
Dec 7 10:49:06 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: usb 2-2: new low speed USB device using uhci_hcd and address 2
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 16
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:02:0a.2: EHCI Host Controller
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 7
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:02:0a.2: irq 16, io mem 0xfbfffc00
Dec 7 10:49:06 upstairs kernel: ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Dec 7 10:49:06 upstairs kernel: usb usb7: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 7-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 7-0:1.0: 5 ports detected
Dec 7 10:49:06 upstairs kernel: usb 2-2: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input3
Dec 7 10:49:06 upstairs kernel: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
Dec 7 10:49:06 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Dec 7 10:49:06 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 22 (level, low) -> IRQ 22
Dec 7 10:49:06 upstairs kernel: ohci_hcd 0000:02:0a.1: OHCI Host Controller
Dec 7 10:49:06 upstairs kernel: ohci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 8
Dec 7 10:49:06 upstairs kernel: ohci_hcd 0000:02:0a.1: irq 22, io mem 0xfbffe000
Dec 7 10:49:06 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input4
Dec 7 10:49:06 upstairs kernel: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Dec 7 10:49:06 upstairs kernel: usb 7-4: new high speed USB device using ehci_hcd and address 2
Dec 7 10:49:06 upstairs kernel: usb 7-4: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 7-4:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 7-4:1.0: 4 ports detected
Dec 7 10:49:06 upstairs kernel: usbcore: registered new interface driver usbhid
Dec 7 10:49:06 upstairs kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Dec 7 10:49:06 upstairs kernel: usb usb8: configuration #1 chosen from 1 choice
Dec 7 10:49:06 upstairs kernel: hub 8-0:1.0: USB hub found
Dec 7 10:49:06 upstairs kernel: hub 8-0:1.0: 2 ports detected
Dec 7 10:49:06 upstairs kernel: NTFS driver 2.1.29 [Flags: R/W MODULE].
Dec 7 10:49:06 upstairs kernel: NTFS volume version 3.1.
Dec 7 10:49:06 upstairs kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc]
Dec 7 10:49:06 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:49:06 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:49:06 upstairs kernel: EXT3 FS on sdb6, internal journal
Dec 7 10:49:06 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:49:06 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:49:06 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:49:06 upstairs kernel: EXT3 FS on sda6, internal journal
Dec 7 10:49:06 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:49:06 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:49:06 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:49:06 upstairs kernel: EXT3 FS on sda7, internal journal
Dec 7 10:49:06 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:49:06 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:49:06 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:49:06 upstairs kernel: EXT3 FS on sdc2, internal journal
Dec 7 10:49:06 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:49:06 upstairs kernel: Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
Dec 7 10:49:06 upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Dec 7 10:49:06 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 7 10:49:06 upstairs kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Dec 7 10:49:11 upstairs kernel: parport_pc 00:06: disabled
Dec 7 10:49:11 upstairs kernel: pnp: the driver 'parport_pc' has been unregistered
Dec 7 10:49:11 upstairs kernel: ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00110666000013cc]
Dec 7 10:49:15 upstairs kernel: [drm] Initialized radeon 1.28.0 20060524 on minor 0
Dec 7 10:49:15 upstairs kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Dec 7 10:49:15 upstairs kernel: agpgart: Device is in legacy mode, falling back to 2.x
Dec 7 10:49:15 upstairs kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Dec 7 10:49:15 upstairs kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Dec 7 10:49:15 upstairs kernel: [drm] Setting GART location based on old memory map
Dec 7 10:49:15 upstairs kernel: [drm] writeback test succeeded in 1 usecs
Dec 7 10:49:27 upstairs kernel: mtrr: no MTRR for f0000000,4000000 found
Dec 7 10:50:28 upstairs kernel: klogd 1.3-3, log source = /proc/kmsg started.
Dec 7 10:50:28 upstairs kernel: Inspecting /boot/System.map-2.6.24-rc4
Dec 7 10:50:29 upstairs kernel: Loaded 25630 symbols from /boot/System.map-2.6.24-rc4.
Dec 7 10:50:29 upstairs kernel: Symbols match kernel version 2.6.24.
Dec 7 10:50:29 upstairs kernel: No module symbols loaded - kernel modules not enabled.
Dec 7 10:50:29 upstairs kernel: Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BD, should be B0 [20070126]
Dec 7 10:50:29 upstairs kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Dec 7 10:50:29 upstairs kernel: pnp: PnP ACPI init
Dec 7 10:50:29 upstairs kernel: ACPI: bus type pnp registered
Dec 7 10:50:29 upstairs kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
Dec 7 10:50:29 upstairs kernel: pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Dec 7 10:50:29 upstairs kernel: pnp: PnP ACPI: found 13 devices
Dec 7 10:50:29 upstairs kernel: ACPI: ACPI bus type pnp unregistered
Dec 7 10:50:29 upstairs kernel: SCSI subsystem initialized
Dec 7 10:50:29 upstairs kernel: libata version 3.00 loaded.
Dec 7 10:50:29 upstairs kernel: usbcore: registered new interface driver usbfs
Dec 7 10:50:29 upstairs kernel: usbcore: registered new interface driver hub
Dec 7 10:50:29 upstairs kernel: usbcore: registered new device driver usb
Dec 7 10:50:29 upstairs kernel: PCI: Using ACPI for IRQ routing
Dec 7 10:50:29 upstairs kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Dec 7 10:50:29 upstairs kernel: Time: tsc clocksource has been installed.
Dec 7 10:50:29 upstairs kernel: pnp: the driver 'system' has been registered
Dec 7 10:50:29 upstairs kernel: system 00:07: ioport range 0x290-0x297 has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:07: driver attached
Dec 7 10:50:29 upstairs kernel: system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:08: ioport range 0x800-0x87f has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:08: ioport range 0x400-0x41f has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:08: ioport range 0x480-0x4bf has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
Dec 7 10:50:29 upstairs kernel: system 00:08: driver attached
Dec 7 10:50:29 upstairs kernel: system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Dec 7 10:50:29 upstairs kernel: system 00:09: driver attached
Dec 7 10:50:29 upstairs kernel: system 00:0c: iomem range 0x0-0x9ffff could not be reserved
Dec 7 10:50:29 upstairs kernel: system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
Dec 7 10:50:29 upstairs kernel: system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
Dec 7 10:50:29 upstairs kernel: system 00:0c: iomem range 0x100000-0x7ffeffff could not be reserved
Dec 7 10:50:29 upstairs kernel: system 00:0c: iomem range 0xfff00000-0xffffffff could not be reserved
Dec 7 10:50:29 upstairs kernel: system 00:0c: driver attached
Dec 7 10:50:29 upstairs kernel: PCI: Bridge: 0000:00:01.0
Dec 7 10:50:29 upstairs kernel: IO window: d000-dfff
Dec 7 10:50:29 upstairs kernel: MEM window: fbe00000-fbefffff
Dec 7 10:50:29 upstairs kernel: PREFETCH window: f0000000-faffffff
Dec 7 10:50:29 upstairs kernel: PCI: Bridge: 0000:00:1e.0
Dec 7 10:50:29 upstairs kernel: IO window: e000-efff
Dec 7 10:50:29 upstairs kernel: MEM window: fbf00000-fbffffff
Dec 7 10:50:29 upstairs kernel: PREFETCH window: disabled.
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
Dec 7 10:50:29 upstairs kernel: NET: Registered protocol family 2
Dec 7 10:50:29 upstairs kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Dec 7 10:50:29 upstairs kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 7 10:50:29 upstairs kernel: TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
Dec 7 10:50:29 upstairs kernel: TCP: Hash tables configured (established 131072 bind 65536)
Dec 7 10:50:29 upstairs kernel: TCP reno registered
Dec 7 10:50:29 upstairs kernel: highmem bounce pool size: 64 pages
Dec 7 10:50:29 upstairs kernel: io scheduler noop registered
Dec 7 10:50:29 upstairs kernel: io scheduler cfq registered (default)
Dec 7 10:50:29 upstairs kernel: Boot video device is 0000:01:00.0
Dec 7 10:50:29 upstairs kernel: input: Power Button (FF) as /devices/virtual/input/input0
Dec 7 10:50:29 upstairs kernel: ACPI: Power Button (FF) [PWRF]
Dec 7 10:50:29 upstairs kernel: input: Power Button (CM) as /devices/virtual/input/input1
Dec 7 10:50:29 upstairs kernel: ACPI: Power Button (CM) [PWRB]
Dec 7 10:50:29 upstairs kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
Dec 7 10:50:29 upstairs kernel: ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
Dec 7 10:50:29 upstairs kernel: ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
Dec 7 10:50:29 upstairs kernel: Real Time Clock Driver v1.12ac
Dec 7 10:50:29 upstairs kernel: Linux agpgart interface v0.102
Dec 7 10:50:29 upstairs kernel: agpgart: Detected an Intel 865 Chipset.
Dec 7 10:50:29 upstairs kernel: agpgart: AGP aperture is 128M @ 0xe8000000
Dec 7 10:50:29 upstairs kernel: [drm] Initialized drm 1.1.0 20060810
Dec 7 10:50:29 upstairs kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Dec 7 10:50:29 upstairs kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 7 10:50:29 upstairs kernel: pnp: the driver 'serial' has been registered
Dec 7 10:50:29 upstairs kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Dec 7 10:50:29 upstairs kernel: serial 00:0b: driver attached
Dec 7 10:50:29 upstairs kernel: 8139too Fast Ethernet driver 0.9.28
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 16
Dec 7 10:50:29 upstairs kernel: eth0: RealTek RTL8139 at 0xf8816800, 00:17:31:a9:1d:48, IRQ 16
Dec 7 10:50:29 upstairs kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Dec 7 10:50:29 upstairs kernel: ata_piix 0000:00:1f.1: version 2.12
Dec 7 10:50:29 upstairs kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.1 to 64
Dec 7 10:50:29 upstairs kernel: scsi0 : ata_piix
Dec 7 10:50:29 upstairs kernel: scsi1 : ata_piix
Dec 7 10:50:29 upstairs kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
Dec 7 10:50:29 upstairs kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
Dec 7 10:50:29 upstairs kernel: ata1.00: ATA-7: MAXTOR STM3250820A, 3.AAE, max UDMA/100
Dec 7 10:50:29 upstairs kernel: ata1.00: 488397168 sectors, multi 16: LBA48
Dec 7 10:50:29 upstairs kernel: ata1.01: ATA-7: Maxtor 6L160P0, BAJ41G20, max UDMA/133
Dec 7 10:50:29 upstairs kernel: ata1.01: 320173056 sectors, multi 16: LBA48
Dec 7 10:50:29 upstairs kernel: ata1.00: configured for UDMA/100
Dec 7 10:50:29 upstairs kernel: ata1.01: configured for UDMA/100
Dec 7 10:50:29 upstairs kernel: Switched to NOHz mode on CPU #1
Dec 7 10:50:29 upstairs kernel: Switched to NOHz mode on CPU #0
Dec 7 10:50:29 upstairs kernel: ata2.00: ATAPI: SONY DVD RW DW-G120A, MYS2, max UDMA/66
Dec 7 10:50:29 upstairs kernel: ata2.01: ATAPI: PHILIPS DVDR1628P1, Q2.2, max UDMA/33
Dec 7 10:50:29 upstairs kernel: ata2.00: limited to UDMA/33 due to 40-wire cable
Dec 7 10:50:29 upstairs kernel: ata2.00: configured for UDMA/33
Dec 7 10:50:29 upstairs kernel: ata2.01: configured for UDMA/33
Dec 7 10:50:29 upstairs kernel: scsi 0:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:50:29 upstairs kernel: sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Dec 7 10:50:29 upstairs kernel: scsi 0:0:1:0: Direct-Access ATA Maxtor 6L160P0 BAJ4 PQ: 0 ANSI: 5
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] 320173056 512-byte hardware sectors (163929 MB)
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] Write Protect is off
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:50:29 upstairs kernel: sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 >
Dec 7 10:50:29 upstairs kernel: sdb2: <bsd: sdb10 sdb11 sdb12 sdb13 sdb14 >
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Dec 7 10:50:29 upstairs kernel: scsi 1:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS2 PQ: 0 ANSI: 5
Dec 7 10:50:29 upstairs kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Dec 7 10:50:29 upstairs kernel: Uniform CD-ROM driver Revision: 3.20
Dec 7 10:50:29 upstairs kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
Dec 7 10:50:29 upstairs kernel: scsi 1:0:1:0: CD-ROM PHILIPS DVDR1628P1 Q2.2 PQ: 0 ANSI: 5
Dec 7 10:50:29 upstairs kernel: sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Dec 7 10:50:29 upstairs kernel: sr 1:0:1:0: Attached scsi CD-ROM sr1
Dec 7 10:50:29 upstairs kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64
Dec 7 10:50:29 upstairs kernel: scsi2 : ata_piix
Dec 7 10:50:29 upstairs kernel: scsi3 : ata_piix
Dec 7 10:50:29 upstairs kernel: ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 17
Dec 7 10:50:29 upstairs kernel: ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 17
Dec 7 10:50:29 upstairs kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OA70A, max UDMA/133
Dec 7 10:50:29 upstairs kernel: ata3.00: 321672960 sectors, multi 16: LBA48 NCQ (depth 0/32)
Dec 7 10:50:29 upstairs kernel: ata3.00: configured for UDMA/133
Dec 7 10:50:29 upstairs kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] 321672960 512-byte hardware sectors (164697 MB)
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] Write Protect is off
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 7 10:50:29 upstairs kernel: sdc: sdc1 sdc2 sdc3
Dec 7 10:50:29 upstairs kernel: sdc3: <solaris: [s0] sdc5 [s1] sdc6 [s2] sdc7 [s7] sdc8 [s8] sdc9 [s9] sdc10 >
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 7 10:50:29 upstairs kernel: pnp: the driver 'i8042 kbd' has been registered
Dec 7 10:50:29 upstairs kernel: pnp: the driver 'i8042 aux' has been registered
Dec 7 10:50:29 upstairs kernel: i8042 aux 00:0a: driver attached
Dec 7 10:50:29 upstairs kernel: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
Dec 7 10:50:29 upstairs kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
Dec 7 10:50:29 upstairs kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 7 10:50:29 upstairs kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Dec 7 10:50:29 upstairs kernel: mice: PS/2 mouse device common for all mice
Dec 7 10:50:29 upstairs kernel: Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC).
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 18
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1f.5 to 64
Dec 7 10:50:29 upstairs kernel: intel8x0_measure_ac97_clock: measured 50814 usecs
Dec 7 10:50:29 upstairs kernel: intel8x0: clocking to 48000
Dec 7 10:50:29 upstairs kernel: ALSA device list:
Dec 7 10:50:29 upstairs kernel: #0: Intel ICH5 with ALC655 at irq 18
Dec 7 10:50:29 upstairs kernel: TCP cubic registered
Dec 7 10:50:29 upstairs kernel: NET: Registered protocol family 1
Dec 7 10:50:29 upstairs kernel: NET: Registered protocol family 15
Dec 7 10:50:29 upstairs kernel: p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Dec 7 10:50:29 upstairs kernel: Starting balanced_irq
Dec 7 10:50:29 upstairs kernel: Using IPI No-Shortcut mode
Dec 7 10:50:29 upstairs kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
Dec 7 10:50:29 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:50:29 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:50:29 upstairs kernel: VFS: Mounted root (ext3 filesystem) readonly.
Dec 7 10:50:29 upstairs kernel: Freeing unused kernel memory: 180k freed
Dec 7 10:50:29 upstairs kernel: EXT3 FS on sdc1, internal journal
Dec 7 10:50:29 upstairs kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 7 10:50:29 upstairs kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
Dec 7 10:50:29 upstairs kernel: sr 1:0:0:0: Attached scsi generic sg2 type 5
Dec 7 10:50:29 upstairs kernel: sr 1:0:1:0: Attached scsi generic sg3 type 5
Dec 7 10:50:29 upstairs kernel: sd 2:0:0:0: Attached scsi generic sg4 type 0
Dec 7 10:50:29 upstairs kernel: USB Universal Host Controller Interface driver v3.0
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000b800
Dec 7 10:50:29 upstairs kernel: usb usb1: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 1-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 1-0:1.0: 2 ports detected
Dec 7 10:50:29 upstairs kernel: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c000
Dec 7 10:50:29 upstairs kernel: usb usb2: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 2-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 2-0:1.0: 2 ports detected
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000c400
Dec 7 10:50:29 upstairs kernel: usb usb3: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 3-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 3-0:1.0: 2 ports detected
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 19
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.3 to 64
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Dec 7 10:50:29 upstairs kernel: uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000c800
Dec 7 10:50:29 upstairs kernel: usb usb4: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 4-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 4-0:1.0: 2 ports detected
Dec 7 10:50:29 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
Dec 7 10:50:29 upstairs kernel: pnp: the driver 'parport_pc' has been registered
Dec 7 10:50:29 upstairs kernel: parport_pc 00:06: reported by Plug and Play ACPI
Dec 7 10:50:29 upstairs kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
Dec 7 10:50:29 upstairs kernel: parport_pc 00:06: driver attached
Dec 7 10:50:29 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 16
Dec 7 10:50:29 upstairs kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:00:1d.7: debug port 1
Dec 7 10:50:29 upstairs kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfbdffc00
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Dec 7 10:50:29 upstairs kernel: usb usb5: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 5-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 5-0:1.0: 8 ports detected
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.2[C] -> GSI 23 (level, low) -> IRQ 16
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:02:0a.2: EHCI Host Controller
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:02:0a.2: new USB bus registered, assigned bus number 6
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:02:0a.2: irq 16, io mem 0xfbfffc00
Dec 7 10:50:29 upstairs kernel: ehci_hcd 0000:02:0a.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
Dec 7 10:50:29 upstairs kernel: usb usb6: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 6-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 6-0:1.0: 5 ports detected
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 21
Dec 7 10:50:29 upstairs kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fbfff000-fbfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 22
Dec 7 10:50:29 upstairs kernel: ohci_hcd 0000:02:0a.0: OHCI Host Controller
Dec 7 10:50:29 upstairs kernel: ohci_hcd 0000:02:0a.0: new USB bus registered, assigned bus number 7
Dec 7 10:50:29 upstairs kernel: ohci_hcd 0000:02:0a.0: irq 22, io mem 0xfbffd000
Dec 7 10:50:29 upstairs kernel: usb 1-2: USB disconnect, address 2
Dec 7 10:50:29 upstairs kernel: usb 1-2: new full speed USB device using uhci_hcd and address 3
Dec 7 10:50:29 upstairs kernel: usb 1-2: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: usb usb7: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 7-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 7-0:1.0: 3 ports detected
Dec 7 10:50:29 upstairs kernel: usb 6-4: new high speed USB device using ehci_hcd and address 2
Dec 7 10:50:29 upstairs kernel: usb 6-4: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 6-4:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 6-4:1.0: 4 ports detected
Dec 7 10:50:29 upstairs kernel: usb 2-2: new low speed USB device using uhci_hcd and address 2
Dec 7 10:50:29 upstairs kernel: ACPI: PCI Interrupt 0000:02:0a.1[B] -> GSI 22 (level, low) -> IRQ 21
Dec 7 10:50:29 upstairs kernel: ohci_hcd 0000:02:0a.1: OHCI Host Controller
Dec 7 10:50:29 upstairs kernel: ohci_hcd 0000:02:0a.1: new USB bus registered, assigned bus number 8
Dec 7 10:50:29 upstairs kernel: ohci_hcd 0000:02:0a.1: irq 21, io mem 0xfbffe000
Dec 7 10:50:29 upstairs kernel: usb 2-2: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input3
Dec 7 10:50:29 upstairs kernel: input: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Dec 7 10:50:29 upstairs kernel: ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc]
Dec 7 10:50:29 upstairs kernel: input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input4
Dec 7 10:50:29 upstairs kernel: usb usb8: configuration #1 chosen from 1 choice
Dec 7 10:50:29 upstairs kernel: hub 8-0:1.0: USB hub found
Dec 7 10:50:29 upstairs kernel: hub 8-0:1.0: 2 ports detected
Dec 7 10:50:29 upstairs kernel: input: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1A] on usb-0000:00:1d.1-2
Dec 7 10:50:29 upstairs kernel: usbcore: registered new interface driver usbhid
Dec 7 10:50:29 upstairs kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Dec 7 10:50:29 upstairs kernel: NTFS driver 2.1.29 [Flags: R/W MODULE].
Dec 7 10:50:29 upstairs kernel: NTFS volume version 3.1.
Dec 7 10:50:29 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:50:29 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:50:29 upstairs kernel: EXT3 FS on sdb6, internal journal
Dec 7 10:50:29 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:50:29 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:50:29 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:50:29 upstairs kernel: EXT3 FS on sda6, internal journal
Dec 7 10:50:29 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:50:29 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:50:29 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:50:29 upstairs kernel: EXT3 FS on sda7, internal journal
Dec 7 10:50:29 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:50:29 upstairs kernel: EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
Dec 7 10:50:29 upstairs kernel: kjournald starting. Commit interval 5 seconds
Dec 7 10:50:29 upstairs kernel: EXT3 FS on sdc2, internal journal
Dec 7 10:50:29 upstairs kernel: EXT3-fs: mounted filesystem with ordered data mode.
Dec 7 10:50:29 upstairs kernel: Adding 4096532k swap on /dev/sda5. Priority:-1 extents:1 across:4096532k
Dec 7 10:50:29 upstairs kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Dec 7 10:50:29 upstairs kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 7 10:50:29 upstairs kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Dec 7 10:50:34 upstairs kernel: parport_pc 00:06: disabled
Dec 7 10:50:34 upstairs kernel: pnp: the driver 'parport_pc' has been unregistered
Dec 7 10:50:34 upstairs kernel: ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00110666000013cc]
Dec 7 10:50:38 upstairs kernel: [drm] Initialized radeon 1.28.0 20060524 on minor 0
Dec 7 10:50:38 upstairs kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Dec 7 10:50:38 upstairs kernel: agpgart: Device is in legacy mode, falling back to 2.x
Dec 7 10:50:38 upstairs kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Dec 7 10:50:38 upstairs kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Dec 7 10:50:38 upstairs kernel: [drm] Setting GART location based on old memory map
Dec 7 10:50:38 upstairs kernel: [drm] writeback test succeeded in 1 usecs
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc4
# Fri Dec 7 10:32:59 2007
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_HPET_TIMER is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_CPU_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=m
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_BRIDGE_NETFILTER is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK=m
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_REJECT is not set
CONFIG_IP_NF_TARGET_LOG=m
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_REDIRECT is not set
# CONFIG_IP_NF_TARGET_NETMAP is not set
# CONFIG_IP_NF_TARGET_SAME is not set
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_RR is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not set
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
# CONFIG_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
CONFIG_SIGMATEL_FIR=m
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m
#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_IFB is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
# CONFIG_SLIP_COMPRESSED is not set
CONFIG_SLHC=m
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=m
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=128
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not set
# CONFIG_DVB_USB_DIBUSB_MC is not set
# CONFIG_DVB_USB_DIB0700 is not set
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_GP8PSK is not set
# CONFIG_DVB_USB_NOVA_T_USB2 is not set
# CONFIG_DVB_USB_TTUSB2 is not set
CONFIG_DVB_USB_DTT200U=m
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_TDA10086 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
#
# Miscellaneous devices
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=y
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set
#
# SoC Audio support for SuperH
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_RODATA is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
[Home]
[Video for Linux]
[Photo]
[Yosemite Forum]
[Yosemite Photos]
[Video Projectors]
[PDAs]
[Hacking TiVo]
[Linux Kernel]
[Linux SCSI]
[XFree86]
[Devices]
[Big List of Linux Books]
[Free Dating]
