Re: [patch 19/26] USB: mutual exclusion for EHCI init and port resets

[Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>]

On Mon, 19 Nov 2007, David Brownell wrote:

> Still needs the following update, IMO ... 
> 
> ======	CUT HERE
> A recent patch added software synchronization during EHCI startup,
> so ports aren't switched away from the companion controllers after
> resets have started.  This patch adds a short delay letting hardware
> get a chance to finish that port switching before any new resets begin.
> 
> That is, both sides of that hardware race window need to be closed.
> 
> Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/usb/host/ehci-hcd.c |    5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> --- g26.orig/drivers/usb/host/ehci-hcd.c	2007-11-13 16:07:12.000000000 -0800
> +++ g26/drivers/usb/host/ehci-hcd.c	2007-11-13 16:13:01.000000000 -0800
> @@ -594,12 +594,15 @@ static int ehci_run (struct usb_hcd *hcd
>  	 * from the companions to the EHCI controller.  If any of the
>  	 * companions are in the middle of a port reset at the time, it
>  	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
> -	 * guarantees that no resets are in progress.
> +	 * guarantees that no resets are in progress.  After we set CF,
> +	 * a short delay lets the hardware catch up; new resets shouldn't
> +	 * start before the port switching actions complete.
>  	 */
>  	down_write(&ehci_cf_port_reset_rwsem);
>  	hcd->state = HC_STATE_RUNNING;
>  	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
>  	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
> +	msleep(5);
>  	up_write(&ehci_cf_port_reset_rwsem);
>  
>  	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));

This addition certainly won't hurt.  Did we ever get any feedback as to 
whether it actually helped?

Alan Stern


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel