[PATCH] USB: don't change HC power state for a FREEZE

[Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>]

This patch (as1016) prevents PCI-based host controllers from
undergoing a power-state change during a FREEZE or a PRETHAW.  Such
changes are needed only during a SUSPEND.

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
CC: David Brownell <david-b@xxxxxxxxxxx>

---

Index: usb-2.6/drivers/usb/core/hcd-pci.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/hcd-pci.c
+++ usb-2.6/drivers/usb/core/hcd-pci.c
@@ -250,6 +250,12 @@ int usb_hcd_pci_suspend (struct pci_dev 
 			pci_disable_device (dev);
 		}
 
+		if (message.event == PM_EVENT_FREEZE ||
+				message.event == PM_EVENT_PRETHAW) {
+			dev_dbg(hcd->self.controller, "--> no state change\n");
+			goto done;
+		}
+
 		if (!has_pci_pm) {
 			dev_dbg (hcd->self.controller, "--> PCI D0/legacy\n");
 			goto done;


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel