Add support for SuperH SH7722 USB Function.
M66592 is similar to SH7722 USBF. It can support SH7722 USBF by
changing several M66592 code.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@xxxxxxxxxxx>
---
drivers/usb/gadget/Kconfig | 10 +++++++
drivers/usb/gadget/m66592-udc.c | 40 +++++++++++++++++++++++++++++-
drivers/usb/gadget/m66592-udc.h | 34 +++++++++++++++++++++++++
3 files changed, 83 insertions(+), 1 deletion(-)
diff -uprN a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
--- a/drivers/usb/gadget/Kconfig 2007-10-24 12:50:57.000000000 +0900
+++ b/drivers/usb/gadget/Kconfig 2007-10-29 13:23:48.000000000 +0900
@@ -220,6 +220,16 @@ config USB_M66592
default USB_GADGET
select USB_GADGET_SELECTED
+config SUPERH_BUILT_IN_M66592
+ boolean "Enable SuperH built-in USB like the M66592"
+ depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722
+ help
+ SH7722 has USB like the M66592.
+
+ The transfer rate is very slow when use "Ethernet Gadget".
+ However, this problem is improved if change a value of
+ NET_IP_ALIGN to 4.
+
config USB_GADGET_GOKU
boolean "Toshiba TC86C001 'Goku-S'"
depends on PCI
diff -uprN a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c
--- a/drivers/usb/gadget/m66592-udc.c 2007-10-24 12:50:57.000000000 +0900
+++ b/drivers/usb/gadget/m66592-udc.c 2007-10-29 13:23:48.000000000 +0900
@@ -36,9 +36,14 @@ MODULE_DESCRIPTION("M66592 USB gadget dr
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Yoshihiro Shimoda");
-#define DRIVER_VERSION "29 May 2007"
+#define DRIVER_VERSION "18 Oct 2007"
/* module parameters */
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+static unsigned short endian = M66592_LITTLE;
+module_param(endian, ushort, 0644);
+MODULE_PARM_DESC(endian, "data endian: big=0, little=0 (default=0)");
+#else
static unsigned short clock = M66592_XTAL24;
module_param(clock, ushort, 0644);
MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 "
@@ -56,6 +61,7 @@ static unsigned short irq_sense = M66592
module_param(irq_sense, ushort, 0644);
MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=2, falling edge=0 "
"(default=2)");
+#endif
static const char udc_name[] = "m66592_udc";
static const char *m66592_ep_name[] = {
@@ -360,6 +366,7 @@ static void m66592_ep_setting(struct m66
ep->fifosel = M66592_D0FIFOSEL;
ep->fifoctr = M66592_D0FIFOCTR;
ep->fifotrn = M66592_D0FIFOTRN;
+#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
} else if (m66592->num_dma == 1) {
m66592->num_dma++;
ep->use_dma = 1;
@@ -367,6 +374,7 @@ static void m66592_ep_setting(struct m66
ep->fifosel = M66592_D1FIFOSEL;
ep->fifoctr = M66592_D1FIFOCTR;
ep->fifotrn = M66592_D1FIFOTRN;
+#endif
} else {
ep->use_dma = 0;
ep->fifoaddr = M66592_CFIFO;
@@ -611,6 +619,31 @@ static void start_ep0(struct m66592_ep *
}
}
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+static void init_controller(struct m66592 *m66592)
+{
+ m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */
+ m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG);
+ m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG);
+ m66592_bset(m66592, M66592_USBE, M66592_SYSCFG);
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+ /*
+ * This is a workaound for SH7722 2nd cut
+ */
+ m66592_bset(m66592, 0x8000, M66592_DVSTCTR);
+ m66592_bset(m66592, 0x1000, M66592_TESTMODE);
+ m66592_bclr(m66592, 0x8000, M66592_DVSTCTR);
+#endif
+
+ m66592_bset(m66592, M66592_INTL, M66592_INTENB1);
+
+ m66592_write(m66592, 0, M66592_CFBCFG);
+ m66592_write(m66592, 0, M66592_D0FBCFG);
+ m66592_bset(m66592, endian, M66592_CFBCFG);
+ m66592_bset(m66592, endian, M66592_D0FBCFG);
+}
+#else /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
static void init_controller(struct m66592 *m66592)
{
m66592_bset(m66592, (vif & M66592_LDRV) | (endian & M66592_BIGEND),
@@ -636,9 +669,11 @@ static void init_controller(struct m6659
m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR,
M66592_DMA0CFG);
}
+#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
static void disable_controller(struct m66592 *m66592)
{
+#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG);
udelay(1);
m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG);
@@ -646,15 +681,18 @@ static void disable_controller(struct m6
m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG);
udelay(1);
m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG);
+#endif
}
static void m66592_start_xclock(struct m66592 *m66592)
{
+#if !defined(CONFIG_SUPERH_BUILT_IN_M66592)
u16 tmp;
tmp = m66592_read(m66592, M66592_SYSCFG);
if (!(tmp & M66592_XCKE))
m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG);
+#endif
}
/*-------------------------------------------------------------------------*/
diff -uprN a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h
--- a/drivers/usb/gadget/m66592-udc.h 2007-10-24 12:50:57.000000000 +0900
+++ b/drivers/usb/gadget/m66592-udc.h 2007-10-29 13:23:48.000000000 +0900
@@ -72,6 +72,11 @@
#define M66592_P_TST_J 0x0001 /* PERI TEST J */
#define M66592_P_TST_NORMAL 0x0000 /* PERI Normal Mode */
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+#define M66592_CFBCFG 0x0A
+#define M66592_D0FBCFG 0x0C
+#define M66592_LITTLE 0x0100 /* b8: Little endian mode */
+#else
#define M66592_PINCFG 0x0A
#define M66592_LDRV 0x8000 /* b15: Drive Current Adjust */
#define M66592_BIGEND 0x0100 /* b8: Big endian mode */
@@ -91,6 +96,7 @@
#define M66592_PKTM 0x0020 /* b5: Packet mode */
#define M66592_DENDE 0x0010 /* b4: Dend enable */
#define M66592_OBUS 0x0004 /* b2: OUTbus mode */
+#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
#define M66592_CFIFO 0x10
#define M66592_D0FIFO 0x14
@@ -103,9 +109,13 @@
#define M66592_REW 0x4000 /* b14: Buffer rewind */
#define M66592_DCLRM 0x2000 /* b13: DMA buffer clear mode */
#define M66592_DREQE 0x1000 /* b12: DREQ output enable */
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+#define M66592_MBW 0x0800 /* b11: Maximum bit width for FIFO */
+#else
#define M66592_MBW 0x0400 /* b10: Maximum bit width for FIFO */
#define M66592_MBW_8 0x0000 /* 8bit */
#define M66592_MBW_16 0x0400 /* 16bit */
+#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
#define M66592_TRENB 0x0200 /* b9: Transaction counter enable */
#define M66592_TRCLR 0x0100 /* b8: Transaction counter clear */
#define M66592_DEZPM 0x0080 /* b7: Zero-length packet mode */
@@ -530,8 +540,13 @@ static inline void m66592_read_fifo(stru
{
unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+ len = (len + 3) / 4;
+ insl(fifoaddr, buf, len);
+#else
len = (len + 1) / 2;
insw(fifoaddr, buf, len);
+#endif
}
static inline void m66592_write(struct m66592 *m66592, u16 val,
@@ -545,6 +560,24 @@ static inline void m66592_write_fifo(str
void *buf, unsigned long len)
{
unsigned long fifoaddr = (unsigned long)m66592->reg + offset;
+#if defined(CONFIG_SUPERH_BUILT_IN_M66592)
+ unsigned long count;
+ unsigned char *pb;
+ int i;
+
+ count = len / 4;
+ outsl(fifoaddr, buf, count);
+
+ if (len & 0x00000003) {
+ pb = buf + count * 4;
+ for (i = 0; i < (len & 0x00000003); i++) {
+ if (m66592_read(m66592, M66592_CFBCFG)) /* little */
+ outb(pb[i], fifoaddr + (3 - i));
+ else
+ outb(pb[i], fifoaddr + i);
+ }
+ }
+#else
unsigned long odd = len & 0x0001;
len = len / 2;
@@ -553,6 +586,7 @@ static inline void m66592_write_fifo(str
unsigned char *p = buf + len*2;
outb(*p, fifoaddr);
}
+#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */
}
static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat,
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
[Home]
[Video for Linux]
[Photo]
[Yosemite Forum]
[Yosemite Photos]
[Video Projectors]
[PDAs]
[Hacking TiVo]
[Linux Kernel]
[Linux SCSI]
[XFree86]
[Devices]
[Big List of Linux Books]
[Free Dating]
