Re: Raon Everun (Microchip multifunction HID)

[Bill Gribble <grib@xxxxxxxxxxxxxxx>]

Alan Stern writes:
> To start, try building a kernel without all the HID debugging, but do
> enable CONFIG_USB_DEBUG.  Then post the dmesg output showing what 
> happens during startup.

Ok, done.  Here's dmesg output with CONFIG_USB_DEBUG.  The builtin
keyboard never worked during this boot/shutdown cycle.  I believe the
EXPHID0x25 device is the keyboard/mouse/touchscreen/gamepad.

Thanks,
Bill Gribble

Version 1.0.14 (Thu May 31 09:03:25 2007 UTC).
PM: Adding info for No Bus:timer
PM: Adding info for No Bus:seq
ALSA device list:
  No soundcards found.
oprofile: using timer interrupt.
IPv4 over IPv4 tunneling driver
PM: Adding info for No Bus:tunl0
Device driver tunl0 lacks bus and class support for being resumed.
GRE over IPv4 tunneling driver
PM: Adding info for No Bus:gre0
Device driver gre0 lacks bus and class support for being resumed.
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 5
PM: Adding info for No Bus:irlan0
Device driver irlan0 lacks bus and class support for being resumed.
PM: Adding info for No Bus:irnet
IrCOMM protocol (Dag Brattli)
PM: Adding info for No Bus:ircomm0
PM: Adding info for No Bus:ircomm1
PM: Adding info for No Bus:ircomm2
PM: Adding info for No Bus:ircomm3
PM: Adding info for No Bus:ircomm4
PM: Adding info for No Bus:ircomm5
PM: Adding info for No Bus:ircomm6
PM: Adding info for No Bus:ircomm7
PM: Adding info for No Bus:ircomm8
PM: Adding info for No Bus:ircomm9
PM: Adding info for No Bus:ircomm10
PM: Adding info for No Bus:ircomm11
PM: Adding info for No Bus:ircomm12
PM: Adding info for No Bus:ircomm13
PM: Adding info for No Bus:ircomm14
PM: Adding info for No Bus:ircomm15
PM: Adding info for No Bus:ircomm16
PM: Adding info for No Bus:ircomm17
PM: Adding info for No Bus:ircomm18
PM: Adding info for No Bus:ircomm19
PM: Adding info for No Bus:ircomm20
PM: Adding info for No Bus:ircomm21
PM: Adding info for No Bus:ircomm22
PM: Adding info for No Bus:ircomm23
PM: Adding info for No Bus:ircomm24
PM: Adding info for No Bus:ircomm25
PM: Adding info for No Bus:ircomm26
PM: Adding info for No Bus:ircomm27
PM: Adding info for No Bus:ircomm28
PM: Adding info for No Bus:ircomm29
PM: Adding info for No Bus:ircomm30
PM: Adding info for No Bus:ircomm31
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.5
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'CCMP'
ieee80211_crypt: registered algorithm 'TKIP'
Using IPI Shortcut mode
Suspend v2.2.10
Suspend2 Userspace Storage Manager support registered.
Suspend2 Basic User Interface support registered.
Suspend2 Compressor support registered.
Suspend2 Block I/O support registered.
Suspend2 Swap Allocator support registered.
Suspend2 File Allocator support registered.
Suspend2 Userspace UI support registered.
  Magic number: 11:267:137
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
No storage allocator is currently active. Rechecking whether we can use one.
Suspend2: SwapAllocator: No swap signature found at specified location.
Compression Driver: Argh! Nothing follows me in the pipeline!
Compressor didn't initialise okay.
Suspend2: Initialise modules failed!
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
PM: Removing info for No Bus:vcs1
PM: Removing info for No Bus:vcsa1
PM: Adding info for No Bus:vcs1
PM: Adding info for No Bus:vcsa1
geode-aes: GEODE AES engine enabled.
PCI driver Geode LX AES lacks driver specific resume support.
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
PCI: Setting latency timer of device 0000:00:0f.4 to 64
ohci_hcd 0000:00:0f.4: OHCI Host Controller
drivers/usb/core/inode.c: creating file 'devices'
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0f.4: created debug files
ohci_hcd 0000:00:0f.4: irq 7, io mem 0xefffc000
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ohci_hcd 0000:00:0f.4: OHCI controller state
ohci_hcd 0000:00:0f.4: OHCI 1.0, NO legacy support registers
ohci_hcd 0000:00:0f.4: control 0x283 RWC HCFS=operational CBSR=3
ohci_hcd 0000:00:0f.4: cmdstatus 0x00000 SOC=0
ohci_hcd 0000:00:0f.4: intrstatus 0x00000004 SF
ohci_hcd 0000:00:0f.4: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci_hcd 0000:00:0f.4: hcca frame #0007
ohci_hcd 0000:00:0f.4: roothub.a 03000204 POTPGT=3 NPS NDP=4(4)
ohci_hcd 0000:00:0f.4: roothub.b 00000000 PPCM=0000 DR=0000
ohci_hcd 0000:00:0f.4: roothub.status 00008000 DRWE
ohci_hcd 0000:00:0f.4: roothub.portstatus [0] 0x00000100 PPS
ohci_hcd 0000:00:0f.4: roothub.portstatus [1] 0x00000100 PPS
ohci_hcd 0000:00:0f.4: roothub.portstatus [2] 0x00000100 PPS
ohci_hcd 0000:00:0f.4: roothub.portstatus [3] 0x00010301 CSC LSDA PPS CCS
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.9 ohci_hcd
usb usb1: SerialNumber: 0000:00:0f.4
PM: Adding info for usb:usb1
usb usb1: uevent
usb usb1: usb_probe_device
PM: Adding info for No Bus:usbdev1.1_ep00
Device driver usbdev1.1_ep00 lacks bus and class support for being resumed.
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
PM: Adding info for usb:1-0:1.0
usb 1-0:1.0: uevent
usb 1-0:1.0: uevent
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 6ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: trying to enable port power on non-switchable hub
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0000
PM: Adding info for No Bus:usbdev1.1_ep81
Device driver usbdev1.1_ep81 lacks bus and class support for being resumed.
drivers/usb/core/inode.c: creating file '001'
ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [3] = 0x00010301 CSC LSDA PPS CCS
hub 1-0:1.0: port 4, status 0301, change 0001, 1.5 Mb/s
PCI: Setting latency timer of device 0000:00:0f.5 to 64
ehci_hcd 0000:00:0f.5: EHCI Host Controller
drivers/usb/core/inode.c: creating file '002'
ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:0f.5: reset hcs_params 0x1414 dbg=0 cc=1 pcc=4 ordered ports=4
ehci_hcd 0000:00:0f.5: reset hcc_params 5012 thresh 1 uframes 256/512/1024
ehci_hcd 0000:00:0f.5: MWI active
ehci_hcd 0000:00:0f.5: ...powerdown ports...
ehci_hcd 0000:00:0f.5: irq 7, io mem 0xefffb000
ehci_hcd 0000:00:0f.5: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:0f.5: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: default language 0x0409
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.9 ehci_hcd
usb usb2: SerialNumber: 0000:00:0f.5
PM: Adding info for usb:usb2
usb usb2: uevent
usb usb2: usb_probe_device
PM: Adding info for No Bus:usbdev2.1_ep00
Device driver usbdev2.1_ep00 lacks bus and class support for being resumed.
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
PM: Adding info for usb:2-0:1.0
usb 2-0:1.0: uevent
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: individual port power switching
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: Single TT
hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns)
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: enabling power on all ports
ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [3] = 0x00010100 CSC PPS
PM: Adding info for No Bus:usbdev2.1_ep81
Device driver usbdev2.1_ep81 lacks bus and class support for being resumed.
drivers/usb/core/inode.c: creating file '001'
hub 1-0:1.0: debounce: port 4: total 125ms stable 100ms status 0x100
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
ehci_hcd 0000:00:0f.5: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT
hub 2-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 2-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:0f.5: port 4 low speed --> companion
ehci_hcd 0000:00:0f.5: GetStatus port 4 status 003002 POWER OWNER sig=se0 CSC
hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0010
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0010
ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [3] = 0x00010301 CSC LSDA PPS CCS
hub 1-0:1.0: port 4, status 0301, change 0001, 1.5 Mb/s
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x301
ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS
usb 1-4: new low speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:0f.4: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS
usb 1-4: skipped 1 descriptor after interface
usb 1-4: skipped 1 descriptor after interface
usb 1-4: skipped 1 descriptor after interface
usb 1-4: skipped 1 descriptor after interface
usb 1-4: skipped 1 descriptor after interface
usb 1-4: skipped 1 descriptor after interface
usb 1-4: default language 0x0409
usb 1-4: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: EXPHID0x25
usb 1-4: Manufacturer: ----
PM: Adding info for usb:1-4
usb 1-4: uevent
usb 1-4: usb_probe_device
PM: Adding info for No Bus:usbdev1.2_ep00
Device driver usbdev1.2_ep00 lacks bus and class support for being resumed.
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: adding 1-4:1.0 (config #1, interface 0)
PM: Adding info for usb:1-4:1.0
usb 1-4:1.0: uevent
usb 1-4:1.0: uevent
PM: Adding info for No Bus:usbdev1.2_ep81
Device driver usbdev1.2_ep81 lacks bus and class support for being resumed.
usb 1-4: adding 1-4:1.1 (config #1, interface 1)
PM: Adding info for usb:1-4:1.1
usb 1-4:1.1: uevent
usb 1-4:1.1: uevent
PM: Adding info for No Bus:usbdev1.2_ep82
Device driver usbdev1.2_ep82 lacks bus and class support for being resumed.
usb 1-4: adding 1-4:1.2 (config #1, interface 2)
PM: Adding info for usb:1-4:1.2
usb 1-4:1.2: uevent
usb 1-4:1.2: uevent
PM: Adding info for No Bus:usbdev1.2_ep83
Device driver usbdev1.2_ep83 lacks bus and class support for being resumed.
usb 1-4: adding 1-4:1.3 (config #1, interface 3)
PM: Adding info for usb:1-4:1.3
usb 1-4:1.3: uevent
usb 1-4:1.3: uevent
PM: Adding info for No Bus:usbdev1.2_ep84
Device driver usbdev1.2_ep84 lacks bus and class support for being resumed.
usb 1-4: adding 1-4:1.4 (config #1, interface 4)
PM: Adding info for usb:1-4:1.4
usb 1-4:1.4: uevent
usb 1-4:1.4: uevent
PM: Adding info for No Bus:usbdev1.2_ep85
Device driver usbdev1.2_ep85 lacks bus and class support for being resumed.
usb 1-4: adding 1-4:1.5 (config #1, interface 5)
PM: Adding info for usb:1-4:1.5
usb 1-4:1.5: uevent
usb 1-4:1.5: uevent
PM: Adding info for No Bus:usbdev1.2_ep86
Device driver usbdev1.2_ep86 lacks bus and class support for being resumed.
PM: Adding info for No Bus:usbdev1.2_ep06
Device driver usbdev1.2_ep06 lacks bus and class support for being resumed.
drivers/usb/core/inode.c: creating file '002'
hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0010
usbcore: registered new interface driver hiddev
USB driver hiddev lacks resume support.
usbhid 1-4:1.0: usb_probe_interface
usbhid 1-4:1.0: usb_probe_interface - got id
input: ---- EXPHID0x25 as /class/input/input0
input: USB HID v1.01 Keyboard [---- EXPHID0x25] on usb-0000:00:0f.4-4
usbhid 1-4:1.1: usb_probe_interface
usbhid 1-4:1.1: usb_probe_interface - got id
input: ---- EXPHID0x25 as /class/input/input1
input: USB HID v1.01 Mouse [---- EXPHID0x25] on usb-0000:00:0f.4-4
usbhid 1-4:1.2: usb_probe_interface
usbhid 1-4:1.2: usb_probe_interface - got id
input: ---- EXPHID0x25 as /class/input/input2
input: USB HID v1.01 Mouse [---- EXPHID0x25] on usb-0000:00:0f.4-4
usbhid 1-4:1.3: usb_probe_interface
usbhid 1-4:1.3: usb_probe_interface - got id
input: ---- EXPHID0x25 as /class/input/input3
input: USB HID v1.01 Keyboard [---- EXPHID0x25] on usb-0000:00:0f.4-4
usbhid 1-4:1.4: usb_probe_interface
usbhid 1-4:1.4: usb_probe_interface - got id
input: ---- EXPHID0x25 as /class/input/input4
input: USB HID v1.01 Gamepad [---- EXPHID0x25] on usb-0000:00:0f.4-4
usbhid 1-4:1.5: usb_probe_interface
usbhid 1-4:1.5: usb_probe_interface - got id
drivers/usb/core/file.c: looking for a minor, starting at 96
PM: Adding info for No Bus:hiddev0
hiddev96: USB HID v1.01 Device [---- EXPHID0x25] on usb-0000:00:0f.4-4
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
hub 2-0:1.0: hub_suspend
ehci_hcd 0000:00:0f.5: suspend root hub
usb usb2: usb auto-suspend
EXT3 FS on sda1, internal journal
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Removing info for No Bus:vcs2
PM: Removing info for No Bus:vcsa2

!DSPAM:47069adc307322566512740!



-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel