[tip:x86/vmware] x86, vmware: Remove deprecated VMI kernel support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Commit-ID:  9863c90f682fba34cdc26c3437e8c00da6c83fa4
Gitweb:     http://git.kernel.org/tip/9863c90f682fba34cdc26c3437e8c00da6c83fa4
Author:     Alok Kataria <akataria@xxxxxxxxxx>
AuthorDate: Mon, 23 Aug 2010 14:49:11 -0700
Committer:  H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
CommitDate: Mon, 23 Aug 2010 15:18:50 -0700

x86, vmware: Remove deprecated VMI kernel support

With the recent innovations in CPU hardware acceleration technologies
from Intel and AMD, VMware ran a few experiments to compare these
techniques to guest paravirtualization technique on VMware's platform.
These hardware assisted virtualization techniques have outperformed the
performance benefits provided by VMI in most of the workloads. VMware
expects that these hardware features will be ubiquitous in a couple of
years, as a result, VMware has started a phased retirement of this
feature from the hypervisor.

Please note that VMI has always been an optimization and non-VMI kernels
still work fine on VMware's platform.
Latest versions of VMware's product which support VMI are,
Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
releases for these products will continue supporting VMI.

For more details about VMI retirement take a look at this,
http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html

This feature removal was scheduled for 2.6.37 back in September 2009.

Signed-off-by: Alok N Kataria <akataria@xxxxxxxxxx>
LKML-Reference: <1282600151.19396.22.camel@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxxxxxxxx>
---
 Documentation/feature-removal-schedule.txt |   28 -
 Documentation/kernel-parameters.txt        |    2 +-
 arch/x86/Kconfig                           |   19 -
 arch/x86/include/asm/vmi.h                 |  269 ---------
 arch/x86/include/asm/vmi_time.h            |   98 ---
 arch/x86/kernel/Makefile                   |    1 -
 arch/x86/kernel/setup.c                    |   12 +-
 arch/x86/kernel/smpboot.c                  |    2 -
 arch/x86/kernel/vmi_32.c                   |  893 ----------------------------
 arch/x86/kernel/vmiclock_32.c              |  317 ----------
 10 files changed, 5 insertions(+), 1636 deletions(-)

diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 842aa9d..5e2bc4a 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -386,34 +386,6 @@ Who:	Tejun Heo <tj@xxxxxxxxxx>
 
 ----------------------------
 
-What:	Support for VMware's guest paravirtuliazation technique [VMI] will be
-	dropped.
-When:	2.6.37 or earlier.
-Why:	With the recent innovations in CPU hardware acceleration technologies
-	from Intel and AMD, VMware ran a few experiments to compare these
-	techniques to guest paravirtualization technique on VMware's platform.
-	These hardware assisted virtualization techniques have outperformed the
-	performance benefits provided by VMI in most of the workloads. VMware
-	expects that these hardware features will be ubiquitous in a couple of
-	years, as a result, VMware has started a phased retirement of this
-	feature from the hypervisor. We will be removing this feature from the
-	Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
-	technical reasons (read opportunity to remove major chunk of pvops)
-	arise.
-
-	Please note that VMI has always been an optimization and non-VMI kernels
-	still work fine on VMware's platform.
-	Latest versions of VMware's product which support VMI are,
-	Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
-	releases for these products will continue supporting VMI.
-
-	For more details about VMI retirement take a look at this,
-	http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
-
-Who:	Alok N Kataria <akataria@xxxxxxxxxx>
-
-----------------------------
-
 What:	Support for lcd_switch and display_get in asus-laptop driver
 When:	March 2010
 Why:	These two features use non-standard interfaces. There are the
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 2c85c06..5824098 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -455,7 +455,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			[ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
 				pxa_timer,timer3,32k_counter,timer0_1
 			[AVR32] avr32
-			[X86-32] pit,hpet,tsc,vmi-timer;
+			[X86-32] pit,hpet,tsc;
 				scx200_hrt on Geode; cyclone on IBM x440
 			[MIPS] MIPS
 			[PARISC] cr16
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index cea0cd9..f0ee331 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -517,25 +517,6 @@ if PARAVIRT_GUEST
 
 source "arch/x86/xen/Kconfig"
 
-config VMI
-	bool "VMI Guest support (DEPRECATED)"
-	select PARAVIRT
-	depends on X86_32
-	---help---
-	  VMI provides a paravirtualized interface to the VMware ESX server
-	  (it could be used by other hypervisors in theory too, but is not
-	  at the moment), by linking the kernel to a GPL-ed ROM module
-	  provided by the hypervisor.
-
-	  As of September 2009, VMware has started a phased retirement
-	  of this feature from VMware's products. Please see
-	  feature-removal-schedule.txt for details.  If you are
-	  planning to enable this option, please note that you cannot
-	  live migrate a VMI enabled VM to a future VMware product,
-	  which doesn't support VMI. So if you expect your kernel to
-	  seamlessly migrate to newer VMware products, keep this
-	  disabled.
-
 config KVM_CLOCK
 	bool "KVM paravirtualized clock"
 	select PARAVIRT
diff --git a/arch/x86/include/asm/vmi.h b/arch/x86/include/asm/vmi.h
deleted file mode 100644
index 61e08c0..0000000
--- a/arch/x86/include/asm/vmi.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * VMI interface definition
- *
- * Copyright (C) 2005, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Maintained by: Zachary Amsden zach@xxxxxxxxxx
- *
- */
-#include <linux/types.h>
-
-/*
- *---------------------------------------------------------------------
- *
- *  VMI Option ROM API
- *
- *---------------------------------------------------------------------
- */
-#define VMI_SIGNATURE 0x696d5663   /* "cVmi" */
-
-#define PCI_VENDOR_ID_VMWARE            0x15AD
-#define PCI_DEVICE_ID_VMWARE_VMI        0x0801
-
-/*
- * We use two version numbers for compatibility, with the major
- * number signifying interface breakages, and the minor number
- * interface extensions.
- */
-#define VMI_API_REV_MAJOR       3
-#define VMI_API_REV_MINOR       0
-
-#define VMI_CALL_CPUID			0
-#define VMI_CALL_WRMSR			1
-#define VMI_CALL_RDMSR			2
-#define VMI_CALL_SetGDT			3
-#define VMI_CALL_SetLDT			4
-#define VMI_CALL_SetIDT			5
-#define VMI_CALL_SetTR			6
-#define VMI_CALL_GetGDT			7
-#define VMI_CALL_GetLDT			8
-#define VMI_CALL_GetIDT			9
-#define VMI_CALL_GetTR			10
-#define VMI_CALL_WriteGDTEntry		11
-#define VMI_CALL_WriteLDTEntry		12
-#define VMI_CALL_WriteIDTEntry		13
-#define VMI_CALL_UpdateKernelStack	14
-#define VMI_CALL_SetCR0			15
-#define VMI_CALL_SetCR2			16
-#define VMI_CALL_SetCR3			17
-#define VMI_CALL_SetCR4			18
-#define VMI_CALL_GetCR0			19
-#define VMI_CALL_GetCR2			20
-#define VMI_CALL_GetCR3			21
-#define VMI_CALL_GetCR4			22
-#define VMI_CALL_WBINVD			23
-#define VMI_CALL_SetDR			24
-#define VMI_CALL_GetDR			25
-#define VMI_CALL_RDPMC			26
-#define VMI_CALL_RDTSC			27
-#define VMI_CALL_CLTS			28
-#define VMI_CALL_EnableInterrupts	29
-#define VMI_CALL_DisableInterrupts	30
-#define VMI_CALL_GetInterruptMask	31
-#define VMI_CALL_SetInterruptMask	32
-#define VMI_CALL_IRET			33
-#define VMI_CALL_SYSEXIT		34
-#define VMI_CALL_Halt			35
-#define VMI_CALL_Reboot			36
-#define VMI_CALL_Shutdown		37
-#define VMI_CALL_SetPxE			38
-#define VMI_CALL_SetPxELong		39
-#define VMI_CALL_UpdatePxE		40
-#define VMI_CALL_UpdatePxELong		41
-#define VMI_CALL_MachineToPhysical	42
-#define VMI_CALL_PhysicalToMachine	43
-#define VMI_CALL_AllocatePage		44
-#define VMI_CALL_ReleasePage		45
-#define VMI_CALL_InvalPage		46
-#define VMI_CALL_FlushTLB		47
-#define VMI_CALL_SetLinearMapping	48
-
-#define VMI_CALL_SetIOPLMask		61
-#define VMI_CALL_SetInitialAPState	62
-#define VMI_CALL_APICWrite		63
-#define VMI_CALL_APICRead		64
-#define VMI_CALL_IODelay		65
-#define VMI_CALL_SetLazyMode		73
-
-/*
- *---------------------------------------------------------------------
- *
- * MMU operation flags
- *
- *---------------------------------------------------------------------
- */
-
-/* Flags used by VMI_{Allocate|Release}Page call */
-#define VMI_PAGE_PAE             0x10  /* Allocate PAE shadow */
-#define VMI_PAGE_CLONE           0x20  /* Clone from another shadow */
-#define VMI_PAGE_ZEROED          0x40  /* Page is pre-zeroed */
-
-
-/* Flags shared by Allocate|Release Page and PTE updates */
-#define VMI_PAGE_PT              0x01
-#define VMI_PAGE_PD              0x02
-#define VMI_PAGE_PDP             0x04
-#define VMI_PAGE_PML4            0x08
-
-#define VMI_PAGE_NORMAL          0x00 /* for debugging */
-
-/* Flags used by PTE updates */
-#define VMI_PAGE_CURRENT_AS      0x10 /* implies VMI_PAGE_VA_MASK is valid */
-#define VMI_PAGE_DEFER           0x20 /* may queue update until TLB inval */
-#define VMI_PAGE_VA_MASK         0xfffff000
-
-#ifdef CONFIG_X86_PAE
-#define VMI_PAGE_L1		(VMI_PAGE_PT | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
-#define VMI_PAGE_L2		(VMI_PAGE_PD | VMI_PAGE_PAE | VMI_PAGE_ZEROED)
-#else
-#define VMI_PAGE_L1		(VMI_PAGE_PT | VMI_PAGE_ZEROED)
-#define VMI_PAGE_L2		(VMI_PAGE_PD | VMI_PAGE_ZEROED)
-#endif
-
-/* Flags used by VMI_FlushTLB call */
-#define VMI_FLUSH_TLB            0x01
-#define VMI_FLUSH_GLOBAL         0x02
-
-/*
- *---------------------------------------------------------------------
- *
- *  VMI relocation definitions for ROM call get_reloc
- *
- *---------------------------------------------------------------------
- */
-
-/* VMI Relocation types */
-#define VMI_RELOCATION_NONE     0
-#define VMI_RELOCATION_CALL_REL 1
-#define VMI_RELOCATION_JUMP_REL 2
-#define VMI_RELOCATION_NOP	3
-
-#ifndef __ASSEMBLY__
-struct vmi_relocation_info {
-	unsigned char           *eip;
-	unsigned char           type;
-	unsigned char           reserved[3];
-};
-#endif
-
-
-/*
- *---------------------------------------------------------------------
- *
- *  Generic ROM structures and definitions
- *
- *---------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLY__
-
-struct vrom_header {
-	u16     rom_signature;  /* option ROM signature */
-	u8      rom_length;     /* ROM length in 512 byte chunks */
-	u8      rom_entry[4];   /* 16-bit code entry point */
-	u8      rom_pad0;       /* 4-byte align pad */
-	u32     vrom_signature; /* VROM identification signature */
-	u8      api_version_min;/* Minor version of API */
-	u8      api_version_maj;/* Major version of API */
-	u8      jump_slots;     /* Number of jump slots */
-	u8      reserved1;      /* Reserved for expansion */
-	u32     virtual_top;    /* Hypervisor virtual address start */
-	u16     reserved2;      /* Reserved for expansion */
-	u16	license_offs;	/* Offset to License string */
-	u16     pci_header_offs;/* Offset to PCI OPROM header */
-	u16     pnp_header_offs;/* Offset to PnP OPROM header */
-	u32     rom_pad3;       /* PnP reserverd / VMI reserved */
-	u8      reserved[96];   /* Reserved for headers */
-	char    vmi_init[8];    /* VMI_Init jump point */
-	char    get_reloc[8];   /* VMI_GetRelocationInfo jump point */
-} __attribute__((packed));
-
-struct pnp_header {
-	char sig[4];
-	char rev;
-	char size;
-	short next;
-	short res;
-	long devID;
-	unsigned short manufacturer_offset;
-	unsigned short product_offset;
-} __attribute__((packed));
-
-struct pci_header {
-	char sig[4];
-	short vendorID;
-	short deviceID;
-	short vpdData;
-	short size;
-	char rev;
-	char class;
-	char subclass;
-	char interface;
-	short chunks;
-	char rom_version_min;
-	char rom_version_maj;
-	char codetype;
-	char lastRom;
-	short reserved;
-} __attribute__((packed));
-
-/* Function prototypes for bootstrapping */
-#ifdef CONFIG_VMI
-extern void vmi_init(void);
-extern void vmi_activate(void);
-extern void vmi_bringup(void);
-#else
-static inline void vmi_init(void) {}
-static inline void vmi_activate(void) {}
-static inline void vmi_bringup(void) {}
-#endif
-
-/* State needed to start an application processor in an SMP system. */
-struct vmi_ap_state {
-	u32 cr0;
-	u32 cr2;
-	u32 cr3;
-	u32 cr4;
-
-	u64 efer;
-
-	u32 eip;
-	u32 eflags;
-	u32 eax;
-	u32 ebx;
-	u32 ecx;
-	u32 edx;
-	u32 esp;
-	u32 ebp;
-	u32 esi;
-	u32 edi;
-	u16 cs;
-	u16 ss;
-	u16 ds;
-	u16 es;
-	u16 fs;
-	u16 gs;
-	u16 ldtr;
-
-	u16 gdtr_limit;
-	u32 gdtr_base;
-	u32 idtr_base;
-	u16 idtr_limit;
-};
-
-#endif
diff --git a/arch/x86/include/asm/vmi_time.h b/arch/x86/include/asm/vmi_time.h
deleted file mode 100644
index c6e0bee..0000000
--- a/arch/x86/include/asm/vmi_time.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * VMI Time wrappers
- *
- * Copyright (C) 2006, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to dhecht@xxxxxxxxxx
- *
- */
-
-#ifndef _ASM_X86_VMI_TIME_H
-#define _ASM_X86_VMI_TIME_H
-
-/*
- * Raw VMI call indices for timer functions
- */
-#define VMI_CALL_GetCycleFrequency	66
-#define VMI_CALL_GetCycleCounter	67
-#define VMI_CALL_SetAlarm		68
-#define VMI_CALL_CancelAlarm		69
-#define VMI_CALL_GetWallclockTime	70
-#define VMI_CALL_WallclockUpdated	71
-
-/* Cached VMI timer operations */
-extern struct vmi_timer_ops {
-	u64 (*get_cycle_frequency)(void);
-	u64 (*get_cycle_counter)(int);
-	u64 (*get_wallclock)(void);
-	int (*wallclock_updated)(void);
-	void (*set_alarm)(u32 flags, u64 expiry, u64 period);
-	void (*cancel_alarm)(u32 flags);
-} vmi_timer_ops;
-
-/* Prototypes */
-extern void __init vmi_time_init(void);
-extern unsigned long vmi_get_wallclock(void);
-extern int vmi_set_wallclock(unsigned long now);
-extern unsigned long long vmi_sched_clock(void);
-extern unsigned long vmi_tsc_khz(void);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-extern void __devinit vmi_time_bsp_init(void);
-extern void __devinit vmi_time_ap_init(void);
-#endif
-
-/*
- * When run under a hypervisor, a vcpu is always in one of three states:
- * running, halted, or ready.  The vcpu is in the 'running' state if it
- * is executing.  When the vcpu executes the halt interface, the vcpu
- * enters the 'halted' state and remains halted until there is some work
- * pending for the vcpu (e.g. an alarm expires, host I/O completes on
- * behalf of virtual I/O).  At this point, the vcpu enters the 'ready'
- * state (waiting for the hypervisor to reschedule it).  Finally, at any
- * time when the vcpu is not in the 'running' state nor the 'halted'
- * state, it is in the 'ready' state.
- *
- * Real time is advances while the vcpu is 'running', 'ready', or
- * 'halted'.  Stolen time is the time in which the vcpu is in the
- * 'ready' state.  Available time is the remaining time -- the vcpu is
- * either 'running' or 'halted'.
- *
- * All three views of time are accessible through the VMI cycle
- * counters.
- */
-
-/* The cycle counters. */
-#define VMI_CYCLES_REAL         0
-#define VMI_CYCLES_AVAILABLE    1
-#define VMI_CYCLES_STOLEN       2
-
-/* The alarm interface 'flags' bits */
-#define VMI_ALARM_COUNTERS      2
-
-#define VMI_ALARM_COUNTER_MASK  0x000000ff
-
-#define VMI_ALARM_WIRED_IRQ0    0x00000000
-#define VMI_ALARM_WIRED_LVTT    0x00010000
-
-#define VMI_ALARM_IS_ONESHOT    0x00000000
-#define VMI_ALARM_IS_PERIODIC   0x00000100
-
-#define CONFIG_VMI_ALARM_HZ	100
-
-#endif /* _ASM_X86_VMI_TIME_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0925676..801127c 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -91,7 +91,6 @@ obj-$(CONFIG_K8_NB)		+= k8.o
 obj-$(CONFIG_DEBUG_RODATA_TEST)	+= test_rodata.o
 obj-$(CONFIG_DEBUG_NX_TEST)	+= test_nx.o
 
-obj-$(CONFIG_VMI)		+= vmi_32.o vmiclock_32.o
 obj-$(CONFIG_KVM_GUEST)		+= kvm.o
 obj-$(CONFIG_KVM_CLOCK)		+= kvmclock.o
 obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirt_patch_$(BITS).o
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c3a4fbb..feb4c21 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -83,7 +83,6 @@
 #include <asm/dmi.h>
 #include <asm/io_apic.h>
 #include <asm/ist.h>
-#include <asm/vmi.h>
 #include <asm/setup_arch.h>
 #include <asm/bios_ebda.h>
 #include <asm/cacheflush.h>
@@ -734,10 +733,10 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
-	/* VMI may relocate the fixmap; do this before touching ioremap area */
-	vmi_init();
-
-	/* OFW also may relocate the fixmap */
+	/*
+	 * If we have OLPC OFW, we might end up relocating the fixmap due to
+	 * reserve_top(), so do this before touching the ioremap area.
+	 */
 	olpc_ofw_detect();
 
 	early_trap_init();
@@ -838,9 +837,6 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_report_nx();
 
-	/* Must be before kernel pagetables are setup */
-	vmi_activate();
-
 	/* after early param, so could get panic from serial */
 	reserve_early_setup_data();
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 8b3bfc4..63a1a55 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -62,7 +62,6 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/mtrr.h>
-#include <asm/vmi.h>
 #include <asm/apic.h>
 #include <asm/setup.h>
 #include <asm/uv/uv.h>
@@ -311,7 +310,6 @@ notrace static void __cpuinit start_secondary(void *unused)
 	__flush_tlb_all();
 #endif
 
-	vmi_bringup();
 	cpu_init();
 	preempt_disable();
 	smp_callin();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
deleted file mode 100644
index ce9fbac..0000000
--- a/arch/x86/kernel/vmi_32.c
+++ /dev/null
@@ -1,893 +0,0 @@
-/*
- * VMI specific paravirt-ops implementation
- *
- * Copyright (C) 2005, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to zach@xxxxxxxxxx
- *
- */
-
-#include <linux/module.h>
-#include <linux/cpu.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-#include <linux/sched.h>
-#include <linux/gfp.h>
-#include <asm/vmi.h>
-#include <asm/io.h>
-#include <asm/fixmap.h>
-#include <asm/apicdef.h>
-#include <asm/apic.h>
-#include <asm/pgalloc.h>
-#include <asm/processor.h>
-#include <asm/timer.h>
-#include <asm/vmi_time.h>
-#include <asm/kmap_types.h>
-#include <asm/setup.h>
-
-/* Convenient for calling VMI functions indirectly in the ROM */
-typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
-typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int);
-
-#define call_vrom_func(rom,func) \
-   (((VROMFUNC *)(rom->func))())
-
-#define call_vrom_long_func(rom,func,arg) \
-   (((VROMLONGFUNC *)(rom->func)) (arg))
-
-static struct vrom_header *vmi_rom;
-static int disable_pge;
-static int disable_pse;
-static int disable_sep;
-static int disable_tsc;
-static int disable_mtrr;
-static int disable_noidle;
-static int disable_vmi_timer;
-
-/* Cached VMI operations */
-static struct {
-	void (*cpuid)(void /* non-c */);
-	void (*_set_ldt)(u32 selector);
-	void (*set_tr)(u32 selector);
-	void (*write_idt_entry)(struct desc_struct *, int, u32, u32);
-	void (*write_gdt_entry)(struct desc_struct *, int, u32, u32);
-	void (*write_ldt_entry)(struct desc_struct *, int, u32, u32);
-	void (*set_kernel_stack)(u32 selector, u32 sp0);
-	void (*allocate_page)(u32, u32, u32, u32, u32);
-	void (*release_page)(u32, u32);
-	void (*set_pte)(pte_t, pte_t *, unsigned);
-	void (*update_pte)(pte_t *, unsigned);
-	void (*set_linear_mapping)(int, void *, u32, u32);
-	void (*_flush_tlb)(int);
-	void (*set_initial_ap_state)(int, int);
-	void (*halt)(void);
-  	void (*set_lazy_mode)(int mode);
-} vmi_ops;
-
-/* Cached VMI operations */
-struct vmi_timer_ops vmi_timer_ops;
-
-/*
- * VMI patching routines.
- */
-#define MNEM_CALL 0xe8
-#define MNEM_JMP  0xe9
-#define MNEM_RET  0xc3
-
-#define IRQ_PATCH_INT_MASK 0
-#define IRQ_PATCH_DISABLE  5
-
-static inline void patch_offset(void *insnbuf,
-				unsigned long ip, unsigned long dest)
-{
-        *(unsigned long *)(insnbuf+1) = dest-ip-5;
-}
-
-static unsigned patch_internal(int call, unsigned len, void *insnbuf,
-			       unsigned long ip)
-{
-	u64 reloc;
-	struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc;
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	call);
-	switch(rel->type) {
-		case VMI_RELOCATION_CALL_REL:
-			BUG_ON(len < 5);
-			*(char *)insnbuf = MNEM_CALL;
-			patch_offset(insnbuf, ip, (unsigned long)rel->eip);
-			return 5;
-
-		case VMI_RELOCATION_JUMP_REL:
-			BUG_ON(len < 5);
-			*(char *)insnbuf = MNEM_JMP;
-			patch_offset(insnbuf, ip, (unsigned long)rel->eip);
-			return 5;
-
-		case VMI_RELOCATION_NOP:
-			/* obliterate the whole thing */
-			return 0;
-
-		case VMI_RELOCATION_NONE:
-			/* leave native code in place */
-			break;
-
-		default:
-			BUG();
-	}
-	return len;
-}
-
-/*
- * Apply patch if appropriate, return length of new instruction
- * sequence.  The callee does nop padding for us.
- */
-static unsigned vmi_patch(u8 type, u16 clobbers, void *insns,
-			  unsigned long ip, unsigned len)
-{
-	switch (type) {
-		case PARAVIRT_PATCH(pv_irq_ops.irq_disable):
-			return patch_internal(VMI_CALL_DisableInterrupts, len,
-					      insns, ip);
-		case PARAVIRT_PATCH(pv_irq_ops.irq_enable):
-			return patch_internal(VMI_CALL_EnableInterrupts, len,
-					      insns, ip);
-		case PARAVIRT_PATCH(pv_irq_ops.restore_fl):
-			return patch_internal(VMI_CALL_SetInterruptMask, len,
-					      insns, ip);
-		case PARAVIRT_PATCH(pv_irq_ops.save_fl):
-			return patch_internal(VMI_CALL_GetInterruptMask, len,
-					      insns, ip);
-		case PARAVIRT_PATCH(pv_cpu_ops.iret):
-			return patch_internal(VMI_CALL_IRET, len, insns, ip);
-		case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit):
-			return patch_internal(VMI_CALL_SYSEXIT, len, insns, ip);
-		default:
-			break;
-	}
-	return len;
-}
-
-/* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */
-static void vmi_cpuid(unsigned int *ax, unsigned int *bx,
-                               unsigned int *cx, unsigned int *dx)
-{
-	int override = 0;
-	if (*ax == 1)
-		override = 1;
-        asm volatile ("call *%6"
-                      : "=a" (*ax),
-                        "=b" (*bx),
-                        "=c" (*cx),
-                        "=d" (*dx)
-                      : "0" (*ax), "2" (*cx), "r" (vmi_ops.cpuid));
-	if (override) {
-		if (disable_pse)
-			*dx &= ~X86_FEATURE_PSE;
-		if (disable_pge)
-			*dx &= ~X86_FEATURE_PGE;
-		if (disable_sep)
-			*dx &= ~X86_FEATURE_SEP;
-		if (disable_tsc)
-			*dx &= ~X86_FEATURE_TSC;
-		if (disable_mtrr)
-			*dx &= ~X86_FEATURE_MTRR;
-	}
-}
-
-static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new)
-{
-	if (gdt[nr].a != new->a || gdt[nr].b != new->b)
-		write_gdt_entry(gdt, nr, new, 0);
-}
-
-static void vmi_load_tls(struct thread_struct *t, unsigned int cpu)
-{
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
-	vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]);
-	vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]);
-	vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]);
-}
-
-static void vmi_set_ldt(const void *addr, unsigned entries)
-{
-	unsigned cpu = smp_processor_id();
-	struct desc_struct desc;
-
-	pack_descriptor(&desc, (unsigned long)addr,
-			entries * sizeof(struct desc_struct) - 1,
-			DESC_LDT, 0);
-	write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, &desc, DESC_LDT);
-	vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0);
-}
-
-static void vmi_set_tr(void)
-{
-	vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct));
-}
-
-static void vmi_write_idt_entry(gate_desc *dt, int entry, const gate_desc *g)
-{
-	u32 *idt_entry = (u32 *)g;
-	vmi_ops.write_idt_entry(dt, entry, idt_entry[0], idt_entry[1]);
-}
-
-static void vmi_write_gdt_entry(struct desc_struct *dt, int entry,
-				const void *desc, int type)
-{
-	u32 *gdt_entry = (u32 *)desc;
-	vmi_ops.write_gdt_entry(dt, entry, gdt_entry[0], gdt_entry[1]);
-}
-
-static void vmi_write_ldt_entry(struct desc_struct *dt, int entry,
-				const void *desc)
-{
-	u32 *ldt_entry = (u32 *)desc;
-	vmi_ops.write_ldt_entry(dt, entry, ldt_entry[0], ldt_entry[1]);
-}
-
-static void vmi_load_sp0(struct tss_struct *tss,
-				   struct thread_struct *thread)
-{
-	tss->x86_tss.sp0 = thread->sp0;
-
-	/* This can only happen when SEP is enabled, no need to test "SEP"arately */
-	if (unlikely(tss->x86_tss.ss1 != thread->sysenter_cs)) {
-		tss->x86_tss.ss1 = thread->sysenter_cs;
-		wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
-	}
-	vmi_ops.set_kernel_stack(__KERNEL_DS, tss->x86_tss.sp0);
-}
-
-static void vmi_flush_tlb_user(void)
-{
-	vmi_ops._flush_tlb(VMI_FLUSH_TLB);
-}
-
-static void vmi_flush_tlb_kernel(void)
-{
-	vmi_ops._flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL);
-}
-
-/* Stub to do nothing at all; used for delays and unimplemented calls */
-static void vmi_nop(void)
-{
-}
-
-static void vmi_allocate_pte(struct mm_struct *mm, unsigned long pfn)
-{
-	vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
-}
-
-static void vmi_allocate_pmd(struct mm_struct *mm, unsigned long pfn)
-{
- 	/*
-	 * This call comes in very early, before mem_map is setup.
-	 * It is called only for swapper_pg_dir, which already has
-	 * data on it.
-	 */
-	vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
-}
-
-static void vmi_allocate_pmd_clone(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count)
-{
-	vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
-}
-
-static void vmi_release_pte(unsigned long pfn)
-{
-	vmi_ops.release_page(pfn, VMI_PAGE_L1);
-}
-
-static void vmi_release_pmd(unsigned long pfn)
-{
-	vmi_ops.release_page(pfn, VMI_PAGE_L2);
-}
-
-/*
- * We use the pgd_free hook for releasing the pgd page:
- */
-static void vmi_pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	unsigned long pfn = __pa(pgd) >> PAGE_SHIFT;
-
-	vmi_ops.release_page(pfn, VMI_PAGE_L2);
-}
-
-/*
- * Helper macros for MMU update flags.  We can defer updates until a flush
- * or page invalidation only if the update is to the current address space
- * (otherwise, there is no flush).  We must check against init_mm, since
- * this could be a kernel update, which usually passes init_mm, although
- * sometimes this check can be skipped if we know the particular function
- * is only called on user mode PTEs.  We could change the kernel to pass
- * current->active_mm here, but in particular, I was unsure if changing
- * mm/highmem.c to do this would still be correct on other architectures.
- */
-#define is_current_as(mm, mustbeuser) ((mm) == current->active_mm ||    \
-                                       (!mustbeuser && (mm) == &init_mm))
-#define vmi_flags_addr(mm, addr, level, user)                           \
-        ((level) | (is_current_as(mm, user) ?                           \
-                (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
-#define vmi_flags_addr_defer(mm, addr, level, user)                     \
-        ((level) | (is_current_as(mm, user) ?                           \
-                (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
-
-static void vmi_update_pte(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_update_pte_defer(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_set_pte(pte_t *ptep, pte_t pte)
-{
-	/* XXX because of set_pmd_pte, this can be called on PT or PD layers */
-	vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT);
-}
-
-static void vmi_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
-{
-	vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval)
-{
-#ifdef CONFIG_X86_PAE
-	const pte_t pte = { .pte = pmdval.pmd };
-#else
-	const pte_t pte = { pmdval.pud.pgd.pgd };
-#endif
-	vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD);
-}
-
-#ifdef CONFIG_X86_PAE
-
-static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval)
-{
-	/*
-	 * XXX This is called from set_pmd_pte, but at both PT
-	 * and PD layers so the VMI_PAGE_PT flag is wrong.  But
-	 * it is only called for large page mapping changes,
-	 * the Xen backend, doesn't support large pages, and the
-	 * ESX backend doesn't depend on the flag.
-	 */
-	set_64bit((unsigned long long *)ptep,pte_val(pteval));
-	vmi_ops.update_pte(ptep, VMI_PAGE_PT);
-}
-
-static void vmi_set_pud(pud_t *pudp, pud_t pudval)
-{
-	/* Um, eww */
-	const pte_t pte = { .pte = pudval.pgd.pgd };
-	vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP);
-}
-
-static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
-{
-	const pte_t pte = { .pte = 0 };
-	vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
-}
-
-static void vmi_pmd_clear(pmd_t *pmd)
-{
-	const pte_t pte = { .pte = 0 };
-	vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD);
-}
-#endif
-
-#ifdef CONFIG_SMP
-static void __devinit
-vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
-		     unsigned long start_esp)
-{
-	struct vmi_ap_state ap;
-
-	/* Default everything to zero.  This is fine for most GPRs. */
-	memset(&ap, 0, sizeof(struct vmi_ap_state));
-
-	ap.gdtr_limit = GDT_SIZE - 1;
-	ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid);
-
-	ap.idtr_limit = IDT_ENTRIES * 8 - 1;
-	ap.idtr_base = (unsigned long) idt_table;
-
-	ap.ldtr = 0;
-
-	ap.cs = __KERNEL_CS;
-	ap.eip = (unsigned long) start_eip;
-	ap.ss = __KERNEL_DS;
-	ap.esp = (unsigned long) start_esp;
-
-	ap.ds = __USER_DS;
-	ap.es = __USER_DS;
-	ap.fs = __KERNEL_PERCPU;
-	ap.gs = __KERNEL_STACK_CANARY;
-
-	ap.eflags = 0;
-
-#ifdef CONFIG_X86_PAE
-	/* efer should match BSP efer. */
-	if (cpu_has_nx) {
-		unsigned l, h;
-		rdmsr(MSR_EFER, l, h);
-		ap.efer = (unsigned long long) h << 32 | l;
-	}
-#endif
-
-	ap.cr3 = __pa(swapper_pg_dir);
-	/* Protected mode, paging, AM, WP, NE, MP. */
-	ap.cr0 = 0x80050023;
-	ap.cr4 = mmu_cr4_features;
-	vmi_ops.set_initial_ap_state((u32)&ap, phys_apicid);
-}
-#endif
-
-static void vmi_start_context_switch(struct task_struct *prev)
-{
-	paravirt_start_context_switch(prev);
-	vmi_ops.set_lazy_mode(2);
-}
-
-static void vmi_end_context_switch(struct task_struct *next)
-{
-	vmi_ops.set_lazy_mode(0);
-	paravirt_end_context_switch(next);
-}
-
-static void vmi_enter_lazy_mmu(void)
-{
-	paravirt_enter_lazy_mmu();
-	vmi_ops.set_lazy_mode(1);
-}
-
-static void vmi_leave_lazy_mmu(void)
-{
-	vmi_ops.set_lazy_mode(0);
-	paravirt_leave_lazy_mmu();
-}
-
-static inline int __init check_vmi_rom(struct vrom_header *rom)
-{
-	struct pci_header *pci;
-	struct pnp_header *pnp;
-	const char *manufacturer = "UNKNOWN";
-	const char *product = "UNKNOWN";
-	const char *license = "unspecified";
-
-	if (rom->rom_signature != 0xaa55)
-		return 0;
-	if (rom->vrom_signature != VMI_SIGNATURE)
-		return 0;
-	if (rom->api_version_maj != VMI_API_REV_MAJOR ||
-	    rom->api_version_min+1 < VMI_API_REV_MINOR+1) {
-		printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n",
-				rom->api_version_maj,
-				rom->api_version_min);
-		return 0;
-	}
-
-	/*
-	 * Relying on the VMI_SIGNATURE field is not 100% safe, so check
-	 * the PCI header and device type to make sure this is really a
-	 * VMI device.
-	 */
-	if (!rom->pci_header_offs) {
-		printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n");
-		return 0;
-	}
-
-	pci = (struct pci_header *)((char *)rom+rom->pci_header_offs);
-	if (pci->vendorID != PCI_VENDOR_ID_VMWARE ||
-	    pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) {
-		/* Allow it to run... anyways, but warn */
-		printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n");
-	}
-
-	if (rom->pnp_header_offs) {
-		pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs);
-		if (pnp->manufacturer_offset)
-			manufacturer = (const char *)rom+pnp->manufacturer_offset;
-		if (pnp->product_offset)
-			product = (const char *)rom+pnp->product_offset;
-	}
-
-	if (rom->license_offs)
-		license = (char *)rom+rom->license_offs;
-
-	printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n",
-		manufacturer, product,
-		rom->api_version_maj, rom->api_version_min,
-		pci->rom_version_maj, pci->rom_version_min);
-
-	/* Don't allow BSD/MIT here for now because we don't want to end up
-	   with any binary only shim layers */
-	if (strcmp(license, "GPL") && strcmp(license, "GPL v2")) {
-		printk(KERN_WARNING "VMI: Non GPL license `%s' found for ROM. Not used.\n",
-			license);
-		return 0;
-	}
-
-	return 1;
-}
-
-/*
- * Probe for the VMI option ROM
- */
-static inline int __init probe_vmi_rom(void)
-{
-	unsigned long base;
-
-	/* VMI ROM is in option ROM area, check signature */
-	for (base = 0xC0000; base < 0xE0000; base += 2048) {
-		struct vrom_header *romstart;
-		romstart = (struct vrom_header *)isa_bus_to_virt(base);
-		if (check_vmi_rom(romstart)) {
-			vmi_rom = romstart;
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * VMI setup common to all processors
- */
-void vmi_bringup(void)
-{
- 	/* We must establish the lowmem mapping for MMU ops to work */
-	if (vmi_ops.set_linear_mapping)
-		vmi_ops.set_linear_mapping(0, (void *)__PAGE_OFFSET, MAXMEM_PFN, 0);
-}
-
-/*
- * Return a pointer to a VMI function or NULL if unimplemented
- */
-static void *vmi_get_function(int vmicall)
-{
-	u64 reloc;
-	const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,	vmicall);
-	BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);
-	if (rel->type == VMI_RELOCATION_CALL_REL)
-		return (void *)rel->eip;
-	else
-		return NULL;
-}
-
-/*
- * Helper macro for making the VMI paravirt-ops fill code readable.
- * For unimplemented operations, fall back to default, unless nop
- * is returned by the ROM.
- */
-#define para_fill(opname, vmicall)				\
-do {								\
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,		\
-				    VMI_CALL_##vmicall);	\
-	if (rel->type == VMI_RELOCATION_CALL_REL) 		\
-		opname = (void *)rel->eip;			\
-	else if (rel->type == VMI_RELOCATION_NOP) 		\
-		opname = (void *)vmi_nop;			\
-	else if (rel->type != VMI_RELOCATION_NONE)		\
-		printk(KERN_WARNING "VMI: Unknown relocation "	\
-				    "type %d for " #vmicall"\n",\
-					rel->type);		\
-} while (0)
-
-/*
- * Helper macro for making the VMI paravirt-ops fill code readable.
- * For cached operations which do not match the VMI ROM ABI and must
- * go through a tranlation stub.  Ignore NOPs, since it is not clear
- * a NOP * VMI function corresponds to a NOP paravirt-op when the
- * functions are not in 1-1 correspondence.
- */
-#define para_wrap(opname, wrapper, cache, vmicall)		\
-do {								\
-	reloc = call_vrom_long_func(vmi_rom, get_reloc,		\
-				    VMI_CALL_##vmicall);	\
-	BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);		\
-	if (rel->type == VMI_RELOCATION_CALL_REL) {		\
-		opname = wrapper;				\
-		vmi_ops.cache = (void *)rel->eip;		\
-	}							\
-} while (0)
-
-/*
- * Activate the VMI interface and switch into paravirtualized mode
- */
-static inline int __init activate_vmi(void)
-{
-	short kernel_cs;
-	u64 reloc;
-	const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
-
-	/*
-	 * Prevent page tables from being allocated in highmem, even if
-	 * CONFIG_HIGHPTE is enabled.
-	 */
-	__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
-
-	if (call_vrom_func(vmi_rom, vmi_init) != 0) {
-		printk(KERN_ERR "VMI ROM failed to initialize!");
-		return 0;
-	}
-	savesegment(cs, kernel_cs);
-
-	pv_info.paravirt_enabled = 1;
-	pv_info.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
-	pv_info.name = "vmi [deprecated]";
-
-	pv_init_ops.patch = vmi_patch;
-
-	/*
-	 * Many of these operations are ABI compatible with VMI.
-	 * This means we can fill in the paravirt-ops with direct
-	 * pointers into the VMI ROM.  If the calling convention for
-	 * these operations changes, this code needs to be updated.
-	 *
-	 * Exceptions
-	 *  CPUID paravirt-op uses pointers, not the native ISA
-	 *  halt has no VMI equivalent; all VMI halts are "safe"
-	 *  no MSR support yet - just trap and emulate.  VMI uses the
-	 *    same ABI as the native ISA, but Linux wants exceptions
-	 *    from bogus MSR read / write handled
-	 *  rdpmc is not yet used in Linux
-	 */
-
-	/* CPUID is special, so very special it gets wrapped like a present */
-	para_wrap(pv_cpu_ops.cpuid, vmi_cpuid, cpuid, CPUID);
-
-	para_fill(pv_cpu_ops.clts, CLTS);
-	para_fill(pv_cpu_ops.get_debugreg, GetDR);
-	para_fill(pv_cpu_ops.set_debugreg, SetDR);
-	para_fill(pv_cpu_ops.read_cr0, GetCR0);
-	para_fill(pv_mmu_ops.read_cr2, GetCR2);
-	para_fill(pv_mmu_ops.read_cr3, GetCR3);
-	para_fill(pv_cpu_ops.read_cr4, GetCR4);
-	para_fill(pv_cpu_ops.write_cr0, SetCR0);
-	para_fill(pv_mmu_ops.write_cr2, SetCR2);
-	para_fill(pv_mmu_ops.write_cr3, SetCR3);
-	para_fill(pv_cpu_ops.write_cr4, SetCR4);
-
-	para_fill(pv_irq_ops.save_fl.func, GetInterruptMask);
-	para_fill(pv_irq_ops.restore_fl.func, SetInterruptMask);
-	para_fill(pv_irq_ops.irq_disable.func, DisableInterrupts);
-	para_fill(pv_irq_ops.irq_enable.func, EnableInterrupts);
-
-	para_fill(pv_cpu_ops.wbinvd, WBINVD);
-	para_fill(pv_cpu_ops.read_tsc, RDTSC);
-
-	/* The following we emulate with trap and emulate for now */
-	/* paravirt_ops.read_msr = vmi_rdmsr */
-	/* paravirt_ops.write_msr = vmi_wrmsr */
-	/* paravirt_ops.rdpmc = vmi_rdpmc */
-
-	/* TR interface doesn't pass TR value, wrap */
-	para_wrap(pv_cpu_ops.load_tr_desc, vmi_set_tr, set_tr, SetTR);
-
-	/* LDT is special, too */
-	para_wrap(pv_cpu_ops.set_ldt, vmi_set_ldt, _set_ldt, SetLDT);
-
-	para_fill(pv_cpu_ops.load_gdt, SetGDT);
-	para_fill(pv_cpu_ops.load_idt, SetIDT);
-	para_fill(pv_cpu_ops.store_gdt, GetGDT);
-	para_fill(pv_cpu_ops.store_idt, GetIDT);
-	para_fill(pv_cpu_ops.store_tr, GetTR);
-	pv_cpu_ops.load_tls = vmi_load_tls;
-	para_wrap(pv_cpu_ops.write_ldt_entry, vmi_write_ldt_entry,
-		  write_ldt_entry, WriteLDTEntry);
-	para_wrap(pv_cpu_ops.write_gdt_entry, vmi_write_gdt_entry,
-		  write_gdt_entry, WriteGDTEntry);
-	para_wrap(pv_cpu_ops.write_idt_entry, vmi_write_idt_entry,
-		  write_idt_entry, WriteIDTEntry);
-	para_wrap(pv_cpu_ops.load_sp0, vmi_load_sp0, set_kernel_stack, UpdateKernelStack);
-	para_fill(pv_cpu_ops.set_iopl_mask, SetIOPLMask);
-	para_fill(pv_cpu_ops.io_delay, IODelay);
-
-	para_wrap(pv_cpu_ops.start_context_switch, vmi_start_context_switch,
-		  set_lazy_mode, SetLazyMode);
-	para_wrap(pv_cpu_ops.end_context_switch, vmi_end_context_switch,
-		  set_lazy_mode, SetLazyMode);
-
-	para_wrap(pv_mmu_ops.lazy_mode.enter, vmi_enter_lazy_mmu,
-		  set_lazy_mode, SetLazyMode);
-	para_wrap(pv_mmu_ops.lazy_mode.leave, vmi_leave_lazy_mmu,
-		  set_lazy_mode, SetLazyMode);
-
-	/* user and kernel flush are just handled with different flags to FlushTLB */
-	para_wrap(pv_mmu_ops.flush_tlb_user, vmi_flush_tlb_user, _flush_tlb, FlushTLB);
-	para_wrap(pv_mmu_ops.flush_tlb_kernel, vmi_flush_tlb_kernel, _flush_tlb, FlushTLB);
-	para_fill(pv_mmu_ops.flush_tlb_single, InvalPage);
-
-	/*
-	 * Until a standard flag format can be agreed on, we need to
-	 * implement these as wrappers in Linux.  Get the VMI ROM
-	 * function pointers for the two backend calls.
-	 */
-#ifdef CONFIG_X86_PAE
-	vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong);
-	vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong);
-#else
-	vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE);
-	vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE);
-#endif
-
-	if (vmi_ops.set_pte) {
-		pv_mmu_ops.set_pte = vmi_set_pte;
-		pv_mmu_ops.set_pte_at = vmi_set_pte_at;
-		pv_mmu_ops.set_pmd = vmi_set_pmd;
-#ifdef CONFIG_X86_PAE
-		pv_mmu_ops.set_pte_atomic = vmi_set_pte_atomic;
-		pv_mmu_ops.set_pud = vmi_set_pud;
-		pv_mmu_ops.pte_clear = vmi_pte_clear;
-		pv_mmu_ops.pmd_clear = vmi_pmd_clear;
-#endif
-	}
-
-	if (vmi_ops.update_pte) {
-		pv_mmu_ops.pte_update = vmi_update_pte;
-		pv_mmu_ops.pte_update_defer = vmi_update_pte_defer;
-	}
-
-	vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
-	if (vmi_ops.allocate_page) {
-		pv_mmu_ops.alloc_pte = vmi_allocate_pte;
-		pv_mmu_ops.alloc_pmd = vmi_allocate_pmd;
-		pv_mmu_ops.alloc_pmd_clone = vmi_allocate_pmd_clone;
-	}
-
-	vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
-	if (vmi_ops.release_page) {
-		pv_mmu_ops.release_pte = vmi_release_pte;
-		pv_mmu_ops.release_pmd = vmi_release_pmd;
-		pv_mmu_ops.pgd_free = vmi_pgd_free;
-	}
-
-	/* Set linear is needed in all cases */
-	vmi_ops.set_linear_mapping = vmi_get_function(VMI_CALL_SetLinearMapping);
-
-	/*
-	 * These MUST always be patched.  Don't support indirect jumps
-	 * through these operations, as the VMI interface may use either
-	 * a jump or a call to get to these operations, depending on
-	 * the backend.  They are performance critical anyway, so requiring
-	 * a patch is not a big problem.
-	 */
-	pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0;
-	pv_cpu_ops.iret = (void *)0xbadbab0;
-
-#ifdef CONFIG_SMP
-	para_wrap(pv_apic_ops.startup_ipi_hook, vmi_startup_ipi_hook, set_initial_ap_state, SetInitialAPState);
-#endif
-
-#ifdef CONFIG_X86_LOCAL_APIC
-       para_fill(apic->read, APICRead);
-       para_fill(apic->write, APICWrite);
-#endif
-
-	/*
-	 * Check for VMI timer functionality by probing for a cycle frequency method
-	 */
-	reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency);
-	if (!disable_vmi_timer && rel->type != VMI_RELOCATION_NONE) {
-		vmi_timer_ops.get_cycle_frequency = (void *)rel->eip;
-		vmi_timer_ops.get_cycle_counter =
-			vmi_get_function(VMI_CALL_GetCycleCounter);
-		vmi_timer_ops.get_wallclock =
-			vmi_get_function(VMI_CALL_GetWallclockTime);
-		vmi_timer_ops.wallclock_updated =
-			vmi_get_function(VMI_CALL_WallclockUpdated);
-		vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm);
-		vmi_timer_ops.cancel_alarm =
-			 vmi_get_function(VMI_CALL_CancelAlarm);
-		x86_init.timers.timer_init = vmi_time_init;
-#ifdef CONFIG_X86_LOCAL_APIC
-		x86_init.timers.setup_percpu_clockev = vmi_time_bsp_init;
-		x86_cpuinit.setup_percpu_clockev = vmi_time_ap_init;
-#endif
-		pv_time_ops.sched_clock = vmi_sched_clock;
-		x86_platform.calibrate_tsc = vmi_tsc_khz;
-		x86_platform.get_wallclock = vmi_get_wallclock;
-		x86_platform.set_wallclock = vmi_set_wallclock;
-
-		/* We have true wallclock functions; disable CMOS clock sync */
-		no_sync_cmos_clock = 1;
-	} else {
-		disable_noidle = 1;
-		disable_vmi_timer = 1;
-	}
-
-	para_fill(pv_irq_ops.safe_halt, Halt);
-
-	/*
-	 * Alternative instruction rewriting doesn't happen soon enough
-	 * to convert VMI_IRET to a call instead of a jump; so we have
-	 * to do this before IRQs get reenabled.  Fortunately, it is
-	 * idempotent.
-	 */
-	apply_paravirt(__parainstructions, __parainstructions_end);
-
-	vmi_bringup();
-
-	return 1;
-}
-
-#undef para_fill
-
-void __init vmi_init(void)
-{
-	if (!vmi_rom)
-		probe_vmi_rom();
-	else
-		check_vmi_rom(vmi_rom);
-
-	/* In case probing for or validating the ROM failed, basil */
-	if (!vmi_rom)
-		return;
-
-	reserve_top_address(-vmi_rom->virtual_top);
-
-#ifdef CONFIG_X86_IO_APIC
-	/* This is virtual hardware; timer routing is wired correctly */
-	no_timer_check = 1;
-#endif
-}
-
-void __init vmi_activate(void)
-{
-	unsigned long flags;
-
-	if (!vmi_rom)
-		return;
-
-	local_irq_save(flags);
-	activate_vmi();
-	local_irq_restore(flags & X86_EFLAGS_IF);
-}
-
-static int __init parse_vmi(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (!strcmp(arg, "disable_pge")) {
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
-		disable_pge = 1;
-	} else if (!strcmp(arg, "disable_pse")) {
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PSE);
-		disable_pse = 1;
-	} else if (!strcmp(arg, "disable_sep")) {
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
-		disable_sep = 1;
-	} else if (!strcmp(arg, "disable_tsc")) {
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_TSC);
-		disable_tsc = 1;
-	} else if (!strcmp(arg, "disable_mtrr")) {
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_MTRR);
-		disable_mtrr = 1;
-	} else if (!strcmp(arg, "disable_timer")) {
-		disable_vmi_timer = 1;
-		disable_noidle = 1;
-	} else if (!strcmp(arg, "disable_noidle"))
-		disable_noidle = 1;
-	return 0;
-}
-
-early_param("vmi", parse_vmi);
diff --git a/arch/x86/kernel/vmiclock_32.c b/arch/x86/kernel/vmiclock_32.c
deleted file mode 100644
index 5e1ff66..0000000
--- a/arch/x86/kernel/vmiclock_32.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * VMI paravirtual timer support routines.
- *
- * Copyright (C) 2007, VMware, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/cpumask.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-
-#include <asm/vmi.h>
-#include <asm/vmi_time.h>
-#include <asm/apicdef.h>
-#include <asm/apic.h>
-#include <asm/timer.h>
-#include <asm/i8253.h>
-#include <asm/irq_vectors.h>
-
-#define VMI_ONESHOT  (VMI_ALARM_IS_ONESHOT  | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
-#define VMI_PERIODIC (VMI_ALARM_IS_PERIODIC | VMI_CYCLES_REAL | vmi_get_alarm_wiring())
-
-static DEFINE_PER_CPU(struct clock_event_device, local_events);
-
-static inline u32 vmi_counter(u32 flags)
-{
-	/* Given VMI_ONESHOT or VMI_PERIODIC, return the corresponding
-	 * cycle counter. */
-	return flags & VMI_ALARM_COUNTER_MASK;
-}
-
-/* paravirt_ops.get_wallclock = vmi_get_wallclock */
-unsigned long vmi_get_wallclock(void)
-{
-	unsigned long long wallclock;
-	wallclock = vmi_timer_ops.get_wallclock(); // nsec
-	(void)do_div(wallclock, 1000000000);       // sec
-
-	return wallclock;
-}
-
-/* paravirt_ops.set_wallclock = vmi_set_wallclock */
-int vmi_set_wallclock(unsigned long now)
-{
-	return 0;
-}
-
-/* paravirt_ops.sched_clock = vmi_sched_clock */
-unsigned long long vmi_sched_clock(void)
-{
-	return cycles_2_ns(vmi_timer_ops.get_cycle_counter(VMI_CYCLES_AVAILABLE));
-}
-
-/* x86_platform.calibrate_tsc = vmi_tsc_khz */
-unsigned long vmi_tsc_khz(void)
-{
-	unsigned long long khz;
-	khz = vmi_timer_ops.get_cycle_frequency();
-	(void)do_div(khz, 1000);
-	return khz;
-}
-
-static inline unsigned int vmi_get_timer_vector(void)
-{
-	return IRQ0_VECTOR;
-}
-
-/** vmi clockchip */
-#ifdef CONFIG_X86_LOCAL_APIC
-static unsigned int startup_timer_irq(unsigned int irq)
-{
-	unsigned long val = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, vmi_get_timer_vector());
-
-	return (val & APIC_SEND_PENDING);
-}
-
-static void mask_timer_irq(unsigned int irq)
-{
-	unsigned long val = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, val | APIC_LVT_MASKED);
-}
-
-static void unmask_timer_irq(unsigned int irq)
-{
-	unsigned long val = apic_read(APIC_LVTT);
-	apic_write(APIC_LVTT, val & ~APIC_LVT_MASKED);
-}
-
-static void ack_timer_irq(unsigned int irq)
-{
-	ack_APIC_irq();
-}
-
-static struct irq_chip vmi_chip __read_mostly = {
-	.name 		= "VMI-LOCAL",
-	.startup 	= startup_timer_irq,
-	.mask	 	= mask_timer_irq,
-	.unmask	 	= unmask_timer_irq,
-	.ack 		= ack_timer_irq
-};
-#endif
-
-/** vmi clockevent */
-#define VMI_ALARM_WIRED_IRQ0    0x00000000
-#define VMI_ALARM_WIRED_LVTT    0x00010000
-static int vmi_wiring = VMI_ALARM_WIRED_IRQ0;
-
-static inline int vmi_get_alarm_wiring(void)
-{
-	return vmi_wiring;
-}
-
-static void vmi_timer_set_mode(enum clock_event_mode mode,
-			       struct clock_event_device *evt)
-{
-	cycle_t now, cycles_per_hz;
-	BUG_ON(!irqs_disabled());
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_ONESHOT:
-	case CLOCK_EVT_MODE_RESUME:
-		break;
-	case CLOCK_EVT_MODE_PERIODIC:
-		cycles_per_hz = vmi_timer_ops.get_cycle_frequency();
-		(void)do_div(cycles_per_hz, HZ);
-		now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_PERIODIC));
-		vmi_timer_ops.set_alarm(VMI_PERIODIC, now, cycles_per_hz);
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-		switch (evt->mode) {
-		case CLOCK_EVT_MODE_ONESHOT:
-			vmi_timer_ops.cancel_alarm(VMI_ONESHOT);
-			break;
-		case CLOCK_EVT_MODE_PERIODIC:
-			vmi_timer_ops.cancel_alarm(VMI_PERIODIC);
-			break;
-		default:
-			break;
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static int vmi_timer_next_event(unsigned long delta,
-				struct clock_event_device *evt)
-{
-	/* Unfortunately, set_next_event interface only passes relative
-	 * expiry, but we want absolute expiry.  It'd be better if were
-	 * were passed an absolute expiry, since a bunch of time may
-	 * have been stolen between the time the delta is computed and
-	 * when we set the alarm below. */
-	cycle_t now = vmi_timer_ops.get_cycle_counter(vmi_counter(VMI_ONESHOT));
-
-	BUG_ON(evt->mode != CLOCK_EVT_MODE_ONESHOT);
-	vmi_timer_ops.set_alarm(VMI_ONESHOT, now + delta, 0);
-	return 0;
-}
-
-static struct clock_event_device vmi_clockevent = {
-	.name		= "vmi-timer",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 22,
-	.set_mode	= vmi_timer_set_mode,
-	.set_next_event = vmi_timer_next_event,
-	.rating         = 1000,
-	.irq		= 0,
-};
-
-static irqreturn_t vmi_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &__get_cpu_var(local_events);
-	evt->event_handler(evt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction vmi_clock_action  = {
-	.name 		= "vmi-timer",
-	.handler 	= vmi_timer_interrupt,
-	.flags 		= IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
-};
-
-static void __devinit vmi_time_init_clockevent(void)
-{
-	cycle_t cycles_per_msec;
-	struct clock_event_device *evt;
-
-	int cpu = smp_processor_id();
-	evt = &__get_cpu_var(local_events);
-
-	/* Use cycles_per_msec since div_sc params are 32-bits. */
-	cycles_per_msec = vmi_timer_ops.get_cycle_frequency();
-	(void)do_div(cycles_per_msec, 1000);
-
-	memcpy(evt, &vmi_clockevent, sizeof(*evt));
-	/* Must pick .shift such that .mult fits in 32-bits.  Choosing
-	 * .shift to be 22 allows 2^(32-22) cycles per nano-seconds
-	 * before overflow. */
-	evt->mult = div_sc(cycles_per_msec, NSEC_PER_MSEC, evt->shift);
-	/* Upper bound is clockevent's use of ulong for cycle deltas. */
-	evt->max_delta_ns = clockevent_delta2ns(ULONG_MAX, evt);
-	evt->min_delta_ns = clockevent_delta2ns(1, evt);
-	evt->cpumask = cpumask_of(cpu);
-
-	printk(KERN_WARNING "vmi: registering clock event %s. mult=%u shift=%u\n",
-	       evt->name, evt->mult, evt->shift);
-	clockevents_register_device(evt);
-}
-
-void __init vmi_time_init(void)
-{
-	unsigned int cpu;
-	/* Disable PIT: BIOSes start PIT CH0 with 18.2hz peridic. */
-	outb_pit(0x3a, PIT_MODE); /* binary, mode 5, LSB/MSB, ch 0 */
-
-	vmi_time_init_clockevent();
-	setup_irq(0, &vmi_clock_action);
-	for_each_possible_cpu(cpu)
-		per_cpu(vector_irq, cpu)[vmi_get_timer_vector()] = 0;
-}
-
-#ifdef CONFIG_X86_LOCAL_APIC
-void __devinit vmi_time_bsp_init(void)
-{
-	/*
-	 * On APIC systems, we want local timers to fire on each cpu.  We do
-	 * this by programming LVTT to deliver timer events to the IRQ handler
-	 * for IRQ-0, since we can't re-use the APIC local timer handler
-	 * without interfering with that code.
-	 */
-	clockevents_notify(CLOCK_EVT_NOTIFY_SUSPEND, NULL);
-	local_irq_disable();
-#ifdef CONFIG_SMP
-	/*
-	 * XXX handle_percpu_irq only defined for SMP; we need to switch over
-	 * to using it, since this is a local interrupt, which each CPU must
-	 * handle individually without locking out or dropping simultaneous
-	 * local timers on other CPUs.  We also don't want to trigger the
-	 * quirk workaround code for interrupts which gets invoked from
-	 * handle_percpu_irq via eoi, so we use our own IRQ chip.
-	 */
-	set_irq_chip_and_handler_name(0, &vmi_chip, handle_percpu_irq, "lvtt");
-#else
-	set_irq_chip_and_handler_name(0, &vmi_chip, handle_edge_irq, "lvtt");
-#endif
-	vmi_wiring = VMI_ALARM_WIRED_LVTT;
-	apic_write(APIC_LVTT, vmi_get_timer_vector());
-	local_irq_enable();
-	clockevents_notify(CLOCK_EVT_NOTIFY_RESUME, NULL);
-}
-
-void __devinit vmi_time_ap_init(void)
-{
-	vmi_time_init_clockevent();
-	apic_write(APIC_LVTT, vmi_get_timer_vector());
-}
-#endif
-
-/** vmi clocksource */
-static struct clocksource clocksource_vmi;
-
-static cycle_t read_real_cycles(struct clocksource *cs)
-{
-	cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
-	return max(ret, clocksource_vmi.cycle_last);
-}
-
-static struct clocksource clocksource_vmi = {
-	.name			= "vmi-timer",
-	.rating			= 450,
-	.read			= read_real_cycles,
-	.mask			= CLOCKSOURCE_MASK(64),
-	.mult			= 0, /* to be set */
-	.shift			= 22,
-	.flags			= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init init_vmi_clocksource(void)
-{
-	cycle_t cycles_per_msec;
-
-	if (!vmi_timer_ops.get_cycle_frequency)
-		return 0;
-	/* Use khz2mult rather than hz2mult since hz arg is only 32-bits. */
-	cycles_per_msec = vmi_timer_ops.get_cycle_frequency();
-	(void)do_div(cycles_per_msec, 1000);
-
-	/* Note that clocksource.{mult, shift} converts in the opposite direction
-	 * as clockevents.  */
-	clocksource_vmi.mult = clocksource_khz2mult(cycles_per_msec,
-						    clocksource_vmi.shift);
-
-	printk(KERN_WARNING "vmi: registering clock source khz=%lld\n", cycles_per_msec);
-	return clocksource_register(&clocksource_vmi);
-
-}
-module_init(init_vmi_clocksource);
--
To unsubscribe from this list: send the line "unsubscribe linux-tip-commits" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Stable Commits]     [Linux Stable Kernel]     [Linux Kernel]     [Linux USB Devel]     [Linux Video &Media]     [Linux Audio Users]     [Yosemite News]     [Linux SCSI]

  Powered by Linux