[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: System hanging randomly (SMP Kernel 2.6.20) - ATI chipset+Pentium 4HT



El Viernes, 2 de Marzo de 2007, Xavier Callejas escribió:
> El Viernes, 2 de Marzo de 2007, Erik Mouw escribió:
> > Try to recreate the problem without the proprietary wlan driver. With
> > that driver loaded it's impossible to debug.
> >
> >
> > Erik
>
> Thank you Erik,
>
> I've deleted madwifi from my current kernel, now I'm connected with
> ethernet, but after reboot my laptop just stay 10 minutes and then hang
> again :s
>
> The same beahave, the mouse keeps moving but everything gets stucked, then
> the mouse also get hang, I have tu make a force shutdown.
>
> Thank you, I'll be waiting your answer.

Hi,

I've keeping running without hang for about 5 hours.

I have booted with:
Kernel command line: root=/dev/hda3 vga=0x317 resume=/dev/hda2 splash=silent 
splash=verbose noapic enable_8254_timer enable_timer_pin_1 debug apic=debug 
acpi=debug

And also without the Atheros (midwifi) driveres, I'm steel connected by 
ethernet.

I attach dmesg, and other info. about the current boot.

I hope this help.

Thank you.

-- 
Xavier Callejas

Open Your Mind, Use Open Source.
Module                  Size  Used by
appletalk              33836  0 
ax25                   53456  0 
ipx                    26276  0 
p8023                   2304  1 ipx
radeon                111008  2 
drm                    73748  3 radeon
af_packet              20744  2 
ipv6                  246976  14 
cpufreq_conservative     7304  0 
cpufreq_ondemand        8204  0 
cpufreq_userspace       4520  0 
cpufreq_powersave       2048  0 
acpi_cpufreq            8728  0 
speedstep_lib           4868  0 
freq_table              4744  2 cpufreq_ondemand,acpi_cpufreq
snd_pcm_oss            46592  0 
snd_mixer_oss          16256  1 snd_pcm_oss
snd_seq                50672  0 
snd_seq_device          8332  1 snd_seq
button                  7952  0 
battery                 9988  0 
ac                      5252  0 
apparmor               48788  0 
aamatch_pcre           14208  1 apparmor
nls_iso8859_1           4352  1 
nls_cp437               6016  1 
vfat                   12288  1 
fat                    48796  1 vfat
reiserfs              220544  2 
nls_utf8                2304  1 
ntfs                  203668  1 
loop                   16520  0 
dm_mod                 53324  0 
omnibook               57396  0 
backlight               6016  1 omnibook
usbhid                 34144  0 
hid                    22912  1 usbhid
ff_memless              5384  1 usbhid
pcmcia                 35092  0 
firmware_class          9600  1 pcmcia
8139too                25344  0 
mii                     5504  1 8139too
yenta_socket           25100  1 
rsrc_nonstatic         10752  1 yenta_socket
ide_cd                 36768  0 
cdrom                  33184  1 ide_cd
pcmcia_core            37268  3 pcmcia,yenta_socket,rsrc_nonstatic
ehci_hcd               29452  0 
shpchp                 31124  0 
ohci_hcd               18820  0 
snd_atiixp             19468  1 
pci_hotplug            29376  1 shpchp
i2c_piix4               8460  0 
ati_agp                 8844  1 
usbcore               107092  3 usbhid,ehci_hcd,ohci_hcd
i2c_core               20736  1 i2c_piix4
agpgart                30408  2 drm,ati_agp
snd_atiixp_modem       16264  1 
snd_ac97_codec         90404  2 snd_atiixp,snd_atiixp_modem
ac97_bus                2560  1 snd_ac97_codec
snd_pcm                77828  4 snd_pcm_oss,snd_atiixp,snd_atiixp_modem,snd_ac97_codec
snd_timer              22148  2 snd_seq,snd_pcm
snd                    54276  13 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_atiixp,snd_atiixp_modem,snd_ac97_codec,snd_pcm,snd_timer
soundcore               7648  1 snd
snd_page_alloc         10120  3 snd_atiixp,snd_atiixp_modem,snd_pcm
parport_pc             36708  0 
lp                     11172  0 
parport                33736  2 parport_pc,lp
ext3                  128008  2 
mbcache                 8452  1 ext3
jbd                    64052  1 ext3
edd                     9284  0 
fan                     4868  0 
thermal                14088  0 
processor              30140  2 acpi_cpufreq,thermal
atiixp                  6288  0 [permanent]
ide_disk               15744  9 
ide_core              115656  3 ide_cd,atiixp,ide_disk
Linux version 2.6.20-245-xavier (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Feb 26 15:00:17 CST 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000d0000 size: 0000000000008000 end: 00000000000d8000 type: 2
copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000001be70000 end: 000000001bf70000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000001bf70000 size: 000000000000b000 end: 000000001bf7b000 type: 3
copy_e820_map() start: 000000001bf7b000 size: 0000000000005000 end: 000000001bf80000 type: 4
copy_e820_map() start: 000000001bf80000 size: 0000000000080000 end: 000000001c000000 type: 2
copy_e820_map() start: 000000002bf80000 size: 0000000000080000 end: 000000002c000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001bf70000 (usable)
 BIOS-e820: 000000001bf70000 - 000000001bf7b000 (ACPI data)
 BIOS-e820: 000000001bf7b000 - 000000001bf80000 (ACPI NVS)
 BIOS-e820: 000000001bf80000 - 000000001c000000 (reserved)
 BIOS-e820: 000000002bf80000 - 000000002c000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
0MB HIGHMEM available.
447MB LOWMEM available.
found SMP MP-table at 000f6ae0
Entering add_active_range(0, 0, 114544) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   114544
  HighMem    114544 ->   114544
early_node_map[1] active PFN ranges
    0:        0 ->   114544
On node 0 totalpages: 114544
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 862 pages used for memmap
  Normal zone: 109586 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6b40
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1bf75dd2
ACPI: FADT (v001 TOSCPL Chinook  0x06040000 ATI  0x00000003) @ 0x1bf7af24
ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x1bf7af98
ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x1bf75e02
ACPI: DSDT (v001 TOSCPL    SB200 0x06040000 MSFT 0x0100000e) @ 0x00000000
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: Skipping IOAPIC probe due to 'noapic' option.
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID:   Product ID: RS300 Board APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 30000000 (gap: 2c000000:d2c00000)
Detected 3067.607 MHz processor.
Built 1 zonelists.  Total pages: 113650
Kernel command line: root=/dev/hda3 vga=0x317 resume=/dev/hda2 splash=silent splash=verbose noapic enable_8254_timer enable_timer_pin_1 debug apic=debug acpi=debug
bootsplash: silent mode.
bootsplash: verbose mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 447488k/458176k available (1696k kernel code, 10144k reserved, 659k data, 180k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff9b000 - 0xfffff000   ( 400 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
    lowmem  : 0xc0000000 - 0xdbf70000   ( 447 MB)
      .init : 0xc0354000 - 0xc0381000   ( 180 kB)
      .data : 0xc02a81db - 0xc034d054   ( 659 kB)
      .text : 0xc0100000 - 0xc02a81db   (1696 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6138.97 BogoMIPS (lpj=3069488)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20060707
ACPI: successfully read 16816 bytes from file /DSDT.aml
ACPI: Override [DSDT-   SB200] from initramfs - tainting kernel
ACPI (tbget-0297): Table [DSDT] replaced by host OS [20060707]
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01
Getting VERSION: 50014
Getting VERSION: 50014
Getting ID: 0
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
Calibrating delay using timer specific routine.. 6132.71 BogoMIPS (lpj=3066357)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000459d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01
Total of 2 processors activated (12271.69 BogoMIPS).
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3066.0345 MHz.
..... host bus clock speed is 133.0319 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=153
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd958, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNK0] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNK1] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNK2] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNK3] (IRQs 10 *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
pnp: 00:07: ioport range 0x220-0x22f has been reserved
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: e8100000-e81fffff
  PREFETCH window: f0000000-f7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:04.0
  IO window: 0000a400-0000a4ff
  IO window: 0000a800-0000a8ff
  PREFETCH window: 30000000-33ffffff
  MEM window: 34000000-37ffffff
PCI: Bridge: 0000:00:14.4
  IO window: a000-afff
  MEM window: e8200000-e82fffff
  PREFETCH window: 30000000-33ffffff
ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Unpacking initramfs... done
Freeing initrd memory: 3137k freed
Machine check exception polling timer started.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1172843704.198:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI Error (evregion-0317): No handler for Region [ECR_] (db73bbb4) [EmbeddedControl] [20060707]
ACPI Error (exfldio-0290): Region EmbeddedControl(3) has no handler [20060707]
ACPI Exception (dswexec-0458): AE_NOT_EXIST, While resolving operands for [OpcodeName unavailable] [20060707]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.EPWR.PCLK] (Node db73ac48), AE_NOT_EXIST
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._Q1E] (Node db7448ec), AE_NOT_EXIST
vesafb: framebuffer at 0xf0000000, mapped to 0xdc880000, using 6144k, total 65536k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:52d0
vesafb: pmi: set display start = c00c533e, set palette = c00c5378
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81749 bytes,<6>...found (1024x768, 46202 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:14.6 disabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: PC Speaker as /class/input/input0
NET: Registered protocol family 1
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Time: tsc clocksource has been installed.
Freeing unused kernel memory: 180k freed
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
input: AT Translated Set 2 keyboard as /class/input/input3
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N060ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4243N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
ACPI: Processor [CPU1] (supports 8 throttling states)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Attempting manual resume
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
lp: driver loaded but no devices found
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
ALSA sound/pci/atiixp_modem.c:503: atiixp-modem: codec reset timeout
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected Ati IGP9100/M chipset
agpgart: AGP aperture is 32M @ 0xea000000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: PCI Interrupt 0000:00:14.5[B] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 11, io mem 0xe8001000
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.20-245-xavier ohci_hcd
usb usb1: SerialNumber: 0000:00:13.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.1: irq 11, io mem 0xe8002000
8139too Fast Ethernet driver 0.9.28
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.20-245-xavier ohci_hcd
usb usb2: SerialNumber: 0000:00:13.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: irq 11, io mem 0xe8003000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.20-245-xavier ehci_hcd
usb usb3: SerialNumber: 0000:00:13.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
Yenta: CardBus bridge found at 0000:02:04.0 [1179:ff00]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl 0x44
Yenta: ISA IRQ mask 0x04f0, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
pcmcia: parent PCI bridge Memory window: 0xe8200000 - 0xe82fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xdd0c2000, 00:0f:b0:54:f3:17, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
usb 1-1: new low speed USB device using ohci_hcd and address 3
usb 1-1: new device found, idVendor=09da, idProduct=0006
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: A4Tech
usb 1-1: configuration #1 chosen from 1 choice
Adding 722916k swap on /dev/hda2.  Priority:-1 extents:1 across:722916k
Adding 208804k swap on /dev/hda9.  Priority:-2 extents:1 across:208804k
usbcore: registered new interface driver hiddev
input: A4Tech USB Optical Mouse as /class/input/input4
input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
omnibook: Driver version 2.20060921-trunk.
omnibook: Toshiba Satellite A70 detected.
omnibook: Begin table match of blank feature.
omnibook: Try to init cdimode
omnibook: Fail to find a supported LPC I/O bridge, please report
omnibook: Backend compal init failed, skipping entry.
omnibook: Returning table entry nr 1.
omnibook: LCD backlight turn off at console blanking is enabled.
omnibook: Begin table match of bluetooth feature.
omnibook: Try to init ACPI backend
omnibook: ACPI EC device found
omnibook: ACPI backend init OK
omnibook: Returning table entry nr 0.
omnibook: get_wireless raw_state: 5
omnibook: Begin table match of cooling feature.
omnibook: CDI backend init already failed, skipping.
omnibook: Backend compal init failed, skipping entry.
omnibook: Match failed: disabling cooling.
omnibook: Begin table match of display feature.
omnibook: ACPI backend has already been initialized
omnibook: Returning table entry nr 0.
omnibook: Begin table match of hotkeys feature.
omnibook: CDI backend init already failed, skipping.
omnibook: Backend compal init failed, skipping entry.
omnibook: Match failed: disabling hotkeys.
omnibook: version feature has no backend table, io_op not initialized.
omnibook: dmi feature has no backend table, io_op not initialized.
omnibook: Begin table match of lcd feature.
omnibook: CDI backend init already failed, skipping.
omnibook: Backend compal init failed, skipping entry.
omnibook: Returning table entry nr 2.
omnibook: Begin table match of temperature feature.
omnibook: Returning table entry nr 0.
omnibook: Begin table match of touchpad feature.
omnibook: CDI backend init already failed, skipping.
omnibook: Backend compal init failed, skipping entry.
omnibook: Match failed: disabling touchpad.
omnibook: Begin table match of wifi feature.
omnibook: ACPI backend has already been initialized
omnibook: Returning table entry nr 0.
omnibook: get_wireless raw_state: 5
omnibook: Begin table match of throttling feature.
omnibook: ACPI backend has already been initialized
omnibook: Returning table entry nr 0.
omnibook: Enabled features: blank bluetooth display version dmi lcd temperature wifi throttling.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx
loop: loaded (max 8 devices)
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS volume version 3.1.
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor initialized
audit(1172843763.990:2): AppArmor initialized

ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input7
ACPI: Power Button (CM) [PWRB]
IA-32 Microcode Update Driver: v1.14a <tigran@xxxxxxxxxxxxxxxxxxxx>
audit(1172865382.456:3): audit_pid=3040 old=0 by auid=4294967295
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.25.0 20060524 on minor 0
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
[drm] Setting GART location based on old memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
eth0: no IPv6 routers present
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
eth0: link down
usb 1-1: USB disconnect, address 3
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
eth0: link down
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
usb 1-1: new low speed USB device using ohci_hcd and address 4
usb 1-1: new device found, idVendor=09da, idProduct=0006
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: A4Tech
usb 1-1: configuration #1 chosen from 1 choice
input: A4Tech USB Optical Mouse as /class/input/input8
input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-1
eth0: no IPv6 routers present
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
usb 1-1: USB disconnect, address 4
eth0: link down
usb 1-1: new low speed USB device using ohci_hcd and address 5
usb 1-1: new device found, idVendor=09da, idProduct=0006
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: A4Tech
usb 1-1: configuration #1 chosen from 1 choice
input: A4Tech USB Optical Mouse as /class/input/input9
input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:13.0-1
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
eth0: no IPv6 routers present
           CPU0       CPU1       
  0:   19682079          0    XT-PIC-XT        timer
  1:      15061          0    XT-PIC-XT        i8042
  2:          0          0    XT-PIC-XT        cascade
  8:          2          0    XT-PIC-XT        rtc
  9:      20906          0    XT-PIC-XT        acpi
 11:    1575148          0    XT-PIC-XT        ATI IXP Modem, ATI IXP, ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3, yenta, eth0, radeon@pci:0000:01:05.0
 12:     163277          0    XT-PIC-XT        i8042
 14:     764680          0    XT-PIC-XT        ide0
 15:     174617          0    XT-PIC-XT        ide1
NMI:          0          0 
LOC:   19682494   19683109 
ERR:          0
MIS:          0
  7:23PM  funcionando   5:28,  4 users,  carga promedio: 1,18, 3,03, 1,87
00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02)
00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01)
00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01)
00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01)
00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 18)
00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller
00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c
00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller
00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01)
01:05.0 VGA compatible controller: ATI Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]
02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)

[Audio]     [Hams]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite Photos]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linux Resources]     [Fedora Users]

Add to Google