RE: [PATCH v7 00/10] R-Car Gen2 PCIe host driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

I assume that you'll take the PCI driver patches (0001, 0002 & 0005) through your tree and that the rest are platform specific patches that will go via Simon Horman. Would you like me to split this into two separate patch sets?

Thanks
Phil

> -----Original Message-----
> From: linux-sh-owner@xxxxxxxxxxxxxxx [mailto:linux-sh-
> owner@xxxxxxxxxxxxxxx] On Behalf Of Phil Edworthy
> Sent: 31 March 2014 11:31
> To: linux-pci@xxxxxxxxxxxxxxx
> Cc: linux-sh@xxxxxxxxxxxxxxx; LAKML; Bjorn Helgaas; Valentine Barshak;
> Simon Horman; Magnus Damm; Ben Dooks; Phil Edworthy
> Subject: [PATCH v7 00/10] R-Car Gen2 PCIe host driver
> 
> This is version 7 of a PCIe Host driver for the R-Car Gen2 devices, i.e. R-Car H2
> (r8a7790) and R-Car M2 (r8a7791).
> 
> v7:
>  - Change binding description of clocks to 'clock specifiers'
> 
> v6:
>  - Correct DT bindings description for reg and clocks
>  - Split device and board DT changes
>  - Add shmobile to subject for shmobile DT patches
>  - Don't check MSI irq number is valid, as upper level checks this
>  - Change "Unexpected MSI" msg to debug level
>  - Reword "Unexpected MSI" comment so that it's one line
>  - Remove patch that adds HAVE_ARM_ARCH_TIMER to koelsch defconfig as
> not needed
> 
> v5:
>  - Use module_platform_driver instead of subsys_initcall
>  - Use the of_device_id data field for HW init function
>  - Init hw_pci struct in declaration
>  - Renesas SoC compatible string has peripheral before device name
>  - Add PCIe bus clock reference
>  - Use dma-ranges property to specify inbound memory regions
>  - Support multiple IO windows and correct resources
>  - Return IRQ_NONE from MSI isr when there is no pending MSI
>  - Add additional interrupt bindings
> 
> v4:
>  - Use runtime PM properly
> 
> Phil Edworthy (10):
>   PCI: host: rcar: Add Renesas R-Car PCIe driver
>   PCI: host: rcar: Add MSI support
>   ARM: shmobile: r8a7790: Add PCIe clock device tree nodes
>   ARM: shmobile: r8a7791: Add PCIe clock device tree nodes
>   dt-bindings: pci: rcar pcie device tree bindings
>   ARM: shmobile: r8a7790: Add PCIe device nodes
>   ARM: shmobile: lager: Add PCIe device nodes
>   ARM: shmobile: r8a7791: Add PCIe device nodes
>   ARM: shmobile: koelsch: Add PCIe device nodes
>   ARM: shmobile: koelsch: Add PCIe to defconfig
> 
>  Documentation/devicetree/bindings/pci/rcar-pci.txt |  45 +
>  arch/arm/boot/dts/r8a7790-lager.dts                |  10 +
>  arch/arm/boot/dts/r8a7790.dtsi                     |  31 +-
>  arch/arm/boot/dts/r8a7791-koelsch.dts              |  14 +
>  arch/arm/boot/dts/r8a7791.dtsi                     |  31 +-
>  arch/arm/configs/koelsch_defconfig                 |   3 +
>  drivers/pci/host/Kconfig                           |   6 +
>  drivers/pci/host/Makefile                          |   1 +
>  drivers/pci/host/pcie-rcar.c                       | 929 +++++++++++++++++++++
>  drivers/pci/host/pcie-rcar.h                       |  87 ++
>  include/dt-bindings/clock/r8a7790-clock.h          |   1 +
>  include/dt-bindings/clock/r8a7791-clock.h          |   1 +
>  12 files changed, 1154 insertions(+), 5 deletions(-)  create mode 100644
> Documentation/devicetree/bindings/pci/rcar-pci.txt
>  create mode 100644 drivers/pci/host/pcie-rcar.c  create mode 100644
> drivers/pci/host/pcie-rcar.h
> 
> --
> 1.9.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body
> of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at
> http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Renesas SOC]     [Linux Samsung SOC]     [Linux OMAP]     [Linux USB Devel]     [Linux ARM Kernel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux