Re: [PATCH 6/6] ARM: mach-shmobile: armadillo800eva: add support sh_eth

[Simon Horman <horms@xxxxxxxxxxxx>]

Hi Morimoto-san,

are some changes in drivers/net/ethernet/renesas/ also required
or am I missing something else?

On Thu, Apr 05, 2012 at 01:34:27AM -0700, Kuninori Morimoto wrote:
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
> ---
>  arch/arm/mach-shmobile/board-armadillo800eva.c |   58 ++++++++++++++++++++++++
>  1 files changed, 58 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
> index 987265a..b1a192a 100644
> --- a/arch/arm/mach-shmobile/board-armadillo800eva.c
> +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
> @@ -27,6 +27,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/gpio.h>
>  #include <linux/gpio_keys.h>
> +#include <linux/sh_eth.h>
>  #include <linux/videodev2.h>
>  #include <mach/common.h>
>  #include <asm/page.h>
> @@ -96,6 +97,38 @@
>   *-----------+---------------+----------------------------
>   */
>  
> +/* Ether */
> +static struct sh_eth_plat_data sh_eth_platdata = {
> +	.phy			= 0x00, /* LAN8710A */
> +	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
> +	.register_type		= SH_ETH_REG_GIGABIT,
> +	.phy_interface		= PHY_INTERFACE_MODE_MII,
> +};
> +
> +static struct resource sh_eth_resources[] = {
> +	{
> +		.start	= 0xe9a00000,
> +		.end	= 0xe9a00800 - 1,
> +		.flags	= IORESOURCE_MEM,
> +	}, {
> +		.start	= 0xe9a01800,
> +		.end	= 0xe9a02000 - 1,
> +		.flags	= IORESOURCE_MEM,
> +	}, {
> +		.start	= evt2irq(0x0500),
> +		.flags	= IORESOURCE_IRQ,
> +	},
> +};
> +
> +static struct platform_device sh_eth_device = {
> +	.name = "sh-eth",
> +	.dev = {
> +		.platform_data = &sh_eth_platdata,
> +	},
> +	.resource = sh_eth_resources,
> +	.num_resources = ARRAY_SIZE(sh_eth_resources),
> +};
> +
>  /* LCDC */
>  static struct fb_videomode lcdc0_mode = {
>  	.name		= "AMPIER/AM-800480",
> @@ -188,6 +221,7 @@ static struct platform_device gpio_keys_device = {
>  static struct platform_device *eva_devices[] __initdata = {
>  	&lcdc0_device,
>  	&gpio_keys_device,
> +	&sh_eth_device,
>  };
>  
>  /*
> @@ -244,6 +278,30 @@ static void __init eva_init(void)
>  	gpio_request(GPIO_PORT166,	NULL); /* TP_RST_B */
>  	gpio_direction_output(GPIO_PORT166, 1);
>  
> +	/* GETHER */
> +	gpio_request(GPIO_FN_ET_CRS,		NULL);
> +	gpio_request(GPIO_FN_ET_MDC,		NULL);
> +	gpio_request(GPIO_FN_ET_MDIO,		NULL);
> +	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
> +	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
> +	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
> +	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
> +	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
> +	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
> +	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
> +	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
> +	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
> +	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
> +	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
> +	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
> +	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
> +	gpio_request(GPIO_FN_ET_COL,		NULL);
> +	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
> +	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
> +
> +	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
> +	gpio_direction_output(GPIO_PORT18, 1);
> +
>  	/*
>  	 * CAUTION
>  	 *
> -- 
> 1.7.5.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html