[PATCH v2] serial: sh-sci: modify sci_break_ctl()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]


SCIF modules which have SCSPTR can output the break signal.
This patch supports it.

This patch tested on sh7757lcr.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
 about v2:
  - add serial_sci.h
  - change sci_in/sci_out to serial_port_in/serial_port_out

 drivers/tty/serial/sh-sci.c |   30 ++++++++++++++++++++++++++----
 include/linux/serial_sci.h  |    2 ++
 2 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 3158e17..3e471fc 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1564,10 +1564,32 @@ static void sci_enable_ms(struct uart_port *port)

 static void sci_break_ctl(struct uart_port *port, int break_state)
 {
-	/*
-	 * Not supported by hardware. Most parts couple break and rx
-	 * interrupts together, with break detection always enabled.
-	 */
+	struct sci_port *s = to_sci_port(port);
+	unsigned short scscr, scsptr;
+
+	switch (s->cfg->regtype) {
+	case SCIx_SH4_SCIF_REGTYPE:
+		scsptr = serial_port_in(port, SCSPTR);
+		scscr = serial_port_in(port, SCSCR);
+
+		if (break_state == -1) {
+			scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
+			scscr &= ~SCSCR_TE;
+		} else {
+			scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
+			scscr |= SCSCR_TE;
+		}
+
+		serial_port_out(port, SCSPTR, scsptr);
+		serial_port_out(port, SCSCR, scscr);
+		break;
+	default:
+		/*
+		 * Not supported by hardware. Most parts couple break and rx
+		 * interrupts together, with break detection always enabled.
+		 */
+		break;
+	}
 }

 #ifdef CONFIG_SERIAL_SH_SCI_DMA
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 7877907..eb763ad 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -52,6 +52,8 @@ enum {
 /* SCSPTR, optional */
 #define SCSPTR_RTSIO	(1 << 7)
 #define SCSPTR_CTSIO	(1 << 5)
+#define SCSPTR_SPB2IO	(1 << 1)
+#define SCSPTR_SPB2DT	(1 << 0)

 /* Offsets into the sci_port->irqs array */
 enum {
-- 
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Linux OMAP]     [Linux USB Devel]     [Linux ARM Kernel]     [Linux Audio Users]     [Photo]     [Yosemite News]    [Yosemite Photos]     [Linux Kernel]     [Linux SCSI]     [X.Org]

Add to Google Powered by Linux