[Prev Page][Next Page]
- [PATCH v3] ARM: shmobile: sh73a0: Update CMT clockevent rating to 80,
Simon Horman
- [PATCH FOR v3.10 v2] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80,
Simon Horman
- [PATCH] ARM: shmobile: kzm9g-reference: Update CMT clocksource rating to 80,
Simon Horman
- [PATCH 1/2] ARM: shmobile: r8a73a4: wait for completion when kicking the clock,
Guennadi Liakhovetski
- [GIT PULL] Renesas ARM SoC based marzen board fix for v3.10,
Simon Horman
- [PATCH] ARM: shmobile: r8a73a4 CPU Hotplug prototype v1 (CA15 x 4),
Magnus Damm
- [PATCH] ARM: shmobile: r8a73a4 SMP prototype v1 (CA15 x 4),
Magnus Damm
- [PATCH] ARM: shmobile: Always use shmobile_setup_delay() on sh73a0,
Magnus Damm
- [PATCH v2 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq,
Guennadi Liakhovetski
- [PATCH v4 00/21] SH pinctrl DT support,
Laurent Pinchart
- [PATCH v4 01/21] sh-pfc: Remove support for platform data,
Laurent Pinchart
- [PATCH v4 03/21] ARM: shmobile: r8a73a4: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v4 02/21] sh-pfc: Add DT support,
Laurent Pinchart
- [PATCH v4 04/21] ARM: shmobile: r8a7740: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v4 05/21] ARM: shmobile: r8a7778: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v4 06/21] ARM: shmobile: r8a7778: Add GPIO controller devices to device tree,
Laurent Pinchart
- [PATCH v4 07/21] ARM: shmobile: r8a7779: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v4 08/21] ARM: shmobile: r8a7779: Add GPIO controller devices to device tree,
Laurent Pinchart
- [PATCH v4 09/21] ARM: shmobile: r8a7790: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v4 10/21] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree,
Laurent Pinchart
- [PATCH v4 11/21] ARM: shmobile: sh7372: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v4 12/21] ARM: shmobile: sh73a0: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v4 13/21] ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree,
Laurent Pinchart
- [PATCH v4 14/21] ARM: shmobile: armadillo-reference: Add st1232 pin mappings,
Laurent Pinchart
- [PATCH v4 15/21] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT,
Laurent Pinchart
- [PATCH v4 16/21] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree,
Laurent Pinchart
- [PATCH v4 17/21] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree,
Laurent Pinchart
- [PATCH v4 18/21] ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT,
Laurent Pinchart
- [PATCH v4 19/21] ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree,
Laurent Pinchart
- [PATCH v4 21/21] ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree,
Laurent Pinchart
- [PATCH v4 20/21] ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree,
Laurent Pinchart
- [RFC/PATCH v2 0/2] R-Car GPIO DT bindings,
Laurent Pinchart
- [PATCH 1/2] ARM: shmobile: r8a7790: implement CPU clock scaling for CPUFreq,
Guennadi Liakhovetski
- [PATCH v2] pwm: renesas-tpu: Add missing pwmchip_remove() call in tpu_remove(),
Axel Lin
- Re: [PATCH] KVM/MIPS32: Export min_low_pfn.,
Ralf Baechle
- [PATCH v5] V4L2: soc_camera: Renesas R-Car VIN driver,
Sergei Shtylyov
[PATCH 0/9] ARM: shmobile: MMCIF and SDHI interfaces for AP6EVM and lager,
Guennadi Liakhovetski
[PATCH v2] ARM: shmobile: BOCK-W: add Ether support,
Sergei Shtylyov
[PATCH v4 0/3] R8A7778/BOCK-W R-Car VIN driver support,
Sergei Shtylyov
ARM: shmobile: r8a7778/bockw: add I2C/HSPI/MMC support,
Kuninori Morimoto
- [PATCH] spi: hspi: fixup long delay time,
Kuninori Morimoto
- [PATCH] mtd: m25p80: add support for the Spansion s25fl008k chip,
Kuninori Morimoto
- [PATCH 01/12] sh-pfc: r8a7778: add I2C pin groups,
Kuninori Morimoto
- [PATCH 02/12] sh-pfc: r8a7778: add HSPI pin groups,
Kuninori Morimoto
- [PATCH 03/12] sh-pfc: r8a7778: add MMCIF pin groups,
Kuninori Morimoto
- [PATCH 04/12] ARM: shmobile: r8a7778: add I2C support,
Kuninori Morimoto
- [PATCH 05/12] ARM: shmobile: r8a7778: add HSPI support,
Kuninori Morimoto
- [PATCH 06/12] ARM: shmobile: r8a7778: add MMCIF support,
Kuninori Morimoto
- [PATCH 07/12] ARM: shmobile: bockw: add I2C device support,
Kuninori Morimoto
- [PATCH 08/12] ARM: shmobile: bockw: add SPI FLASH support,
Kuninori Morimoto
- [PATCH 09/12] ARM: shmobile: bockw: add MMCIF support,
Kuninori Morimoto
- [PATCH 10/12] ARM: shmobile: bockw defconfig: add RTC RX8581 support,
Kuninori Morimoto
- [PATCH 11/12] ARM: shmobile: bockw defconfig: add M25P80 support,
Kuninori Morimoto
- [PATCH 12/12] ARM: shmobile: bockw defconfig: add MMCIF support,
Kuninori Morimoto
[PATCH] ARM: shmobile: Remove unused r8a7790 GIC CPU interface DT bits,
Magnus Damm
[PATCH] ARM: shmobile: Remove unused r8a73a4 GIC CPU interface DT bits,
Magnus Damm
[PATCH] ARM: shmobile: marzen: Use error values in usb_power_*,
Simon Horman
[PATCH v4] V4L2: I2C: ML86V7667 video decoder driver,
Sergei Shtylyov
[PATCH v4 0/3] R8A7779/Marzen R-Car VIN driver support,
Sergei Shtylyov
[PATCH v2 1/2] pinctrl: sh-pfc: fix r8a7790 Function Select register tables,
Guennadi Liakhovetski
[PATCH] pinctrl: sh-pfc: fix r8a7790 Function Select register tables,
Guennadi Liakhovetski
marzen pinctl conflict for renesas-next-20130515v2 + v3.10-rc1,
Simon Horman
[PATCH] mmc: mmcif: don't clear masked interrupts,
Guennadi Liakhovetski
[PATCH v2 0/4] marzen-reference ethernet patches,
Simon Horman
[PATCH v3 00/20] SH pinctrl DT support,
Laurent Pinchart
- [PATCH v3 01/20] sh-pfc: Add DT support,
Laurent Pinchart
- [PATCH v3 02/20] ARM: shmobile: r8a73a4: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v3 04/20] ARM: shmobile: r8a7778: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v3 03/20] ARM: shmobile: r8a7740: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v3 06/20] ARM: shmobile: r8a7779: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v3 05/20] ARM: shmobile: r8a7778: Add GPIO controller devices to device tree,
Laurent Pinchart
- [PATCH v3 07/20] ARM: shmobile: r8a7779: Add GPIO controller devices to device tree,
Laurent Pinchart
- [PATCH v3 08/20] ARM: shmobile: r8a7790: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v3 09/20] ARM: shmobile: r8a7790: Add GPIO controller devices to device tree,
Laurent Pinchart
- [PATCH v3 10/20] ARM: shmobile: sh7372: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v3 11/20] ARM: shmobile: sh73a0: Add pin control device to device tree,
Laurent Pinchart
- [PATCH v3 12/20] ARM: shmobile: armadillo-reference: Move pinctrl mappings to device tree,
Laurent Pinchart
- [PATCH v3 13/20] ARM: shmobile: armadillo-reference: Add st1232 pin mappings,
Laurent Pinchart
- [PATCH v3 14/20] ARM: shmobile: armadillo-reference: Move st1232 reset GPIO to DT,
Laurent Pinchart
- [PATCH v3 15/20] ARM: shmobile: armadillo-reference: Add LED1-LED4 to the device tree,
Laurent Pinchart
- [PATCH v3 16/20] ARM: shmobile: kzm9g-reference: Move pinctrl mappings to device tree,
Laurent Pinchart
- [PATCH v3 17/20] ARM: shmobile: kzm9g-reference: Move SDHI regulators to DT,
Laurent Pinchart
- [PATCH v3 18/20] ARM: shmobile: kzm9g-reference: Add LED1-LED4 to the device tree,
Laurent Pinchart
- [PATCH v3 19/20] ARM: shmobile: marzen-reference: Move pinctrl mappings to device tree,
Laurent Pinchart
- [PATCH v3 20/20] ARM: shmobile: marzen-reference: Add LED2-LED4 to the device tree,
Laurent Pinchart
[PATCH] thermal: rcar: Fix typo in probe information message,
Laurent Pinchart
[PATCH v4] V4L2: soc_camera: Renesas R-Car VIN driver,
Sergei Shtylyov
[PATCH 0/2] marzen-reference ethernet patches,
Laurent Pinchart
marzen-reference doesn't boot with CONFIG_PREEMPT,
Laurent Pinchart
[PATCHv2 00/20] Cleanup irqchip_init calls,
Maxime Ripard
- [PATCH 06/20] ARM: shmobile: kzm9g: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 18/20] ARM: vexpress: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 20/20] ARM: vt8500: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 19/20] ARM: virt: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 17/20] ARM: sirf: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 16/20] ARM: mxs: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 14/20] ARM: msm: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 15/20] ARM: mvebu: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 13/20] ARM: spear: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 12/20] ARM: bcm281xx: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 11/20] ARM: shmobile: sh73a0: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 09/20] ARM: shmobile: r8a73a4: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 10/20] ARM: shmobile: r8a7790: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 08/20] ARM: shmobile: emev2: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 07/20] ARM: shmobile: lager: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 05/20] ARM: shmobile: ape6evm: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 03/20] ARM: nomadik: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 04/20] ARM: picoxcell: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 01/20] ARM: sunxi: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 02/20] ARM: zynq: Remove init_irq declaration in machine description,
Maxime Ripard
- Re: [PATCHv2 00/20] Cleanup irqchip_init calls,
Arnd Bergmann
[PATCH] sh-pfc: r8a7778: fixup IRQ1A settings,
Kuninori Morimoto
[PATCH v2 0/3],
Simon Horman
[RFC PATCH net-next v2 0/3] sh_eth: add support for r8a7790 SoC,
Simon Horman
[PATCH v3] adv7180: add more subdev video ops,
Sergei Shtylyov
[PATCH 00/14] Cleanup irqchip_init calls,
Maxime Ripard
- [PATCH 14/14] ARM: vt8500: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 12/14] ARM: vexpress: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 13/14] ARM: virt: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 10/14] ARM: mxs: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 11/14] ARM: sirf: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 07/14] ARM: spear: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 08/14] ARM: msm: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 09/14] ARM: mvebu: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 05/14] ARM: shmobile: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 04/14] ARM: picoxcell: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 06/14] ARM: bcm281xx: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 03/14] ARM: nomadik: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 02/14] ARM: zynq: Remove init_irq declaration in machine description,
Maxime Ripard
- [PATCH 01/14] ARM: sunxi: Remove init_irq declaration in machine description,
Maxime Ripard
[PATCH 0/3] ARM: mach-shmobile: lager: support GPIO switche,
Simon Horman
Re: Build regressions/improvements in v3.10-rc1 (sh),
Geert Uytterhoeven
[RFC/PATCH 0/2] R-Car GPIO DT bindings,
Laurent Pinchart
[PATCH 0/2] ARM: shmobile: lager: enable Ether,
Simon Horman
[RFC PATCH net-next] sh_eth: add support for r8a7790 SoC,
Simon Horman
[PATCH] ARM: shmobile: r8a7778: correct model name in Kconfig,
Sergei Shtylyov
[PATCH v7 0/3] Add USB support to R8A7778/BOCK-W,
Sergei Shtylyov
[PATCH v4 0/3] Add Ether/USB/VIN pin groups for R8A777[89],
Sergei Shtylyov
[PATCH v5, part4 34/41] mm/SH: prepare for removing num_physpages and simplify mem_init(),
Jiang Liu
[PATCH] irqchip: Add irqchip_init dummy function,
Bastian Hecht
[PATCH] ARM: shmobile: fix sleep-r8a7740.S miscompiles,
Arnd Bergmann
[PATCH] sh-pfc: r8a7779: Don't group USB OVC and PENC pins,
Laurent Pinchart
[PATCH v6 0/3] Add USB support to R8A7778/BOCK-W,
Sergei Shtylyov
[PATCH v7 0/9] Reorganize R8A7779/Marzen USB code,
Sergei Shtylyov
- [PATCH v7 1/9] ARM: shmobile: Marzen: move USB EHCI, OHCI, and PHY devices to R8A7779 code,
Sergei Shtylyov
- [PATCH v7 2/9] ehci-platform: add pre_setup() method to platform data,
Sergei Shtylyov
- [PATCH v7 3/9] ARM: shmobile: r8a7779: setup EHCI internal buffer,
Sergei Shtylyov
- [PATCH v7 4/9] rcar-phy: remove EHCI internal buffer setup,
Sergei Shtylyov
- [PATCH v7 5/9] ARM: shmobile: r8a7779: remove USB PHY 2nd memory resource,
Sergei Shtylyov
- [PATCH v7 6/9] rcar-phy: correct base address,
Sergei Shtylyov
- [PATCH v7 7/9] rcar-phy: add platform data,
Sergei Shtylyov
- [PATCH v7 8/9] ARM: shmobile: Marzen: pass platform data to USB PHY device,
Sergei Shtylyov
- [PATCH v7 9/9] rcar-phy: handle platform data,
Sergei Shtylyov
[PATCH/RFC 0/4] dmaengine: add DT support for DMA multiplexers,
Guennadi Liakhovetski
[PATCH] ARM: shmobile: BOCK-W: add Ether support,
Sergei Shtylyov
[PATCH v2] sh_eth: use random MAC address if no valid one supplied,
Sergei Shtylyov
[PATCH v3 0/4] sh73a0: Expose the PFC-controller SDHI power gate as a regulator,
Laurent Pinchart
[PATCH] sh_eth: use random MAC address if no valid one supplied,
Sergei Shtylyov
[PATCH] sh_eth: add R8A77781 support,
Sergei Shtylyov
[PATCH v3 0/3] Add Ether/VIN pin groups for R8A777[89],
Sergei Shtylyov
[PATCH v2 0/3] Add Ether/VIN pin groups for R8A777[89],
Sergei Shtylyov
[PATCH 0/6] ARM: shmobile: r8a7740: add MMCIF and SDHI to DT,
Guennadi Liakhovetski
[PATCH 0/3] mmc: sdhi / tmio: add DT DMA,
Guennadi Liakhovetski
[PATCH 7/6] DMA: shdma: add DT binding documentation,
Guennadi Liakhovetski
[PATCH] drm: shmobile: Use devm_* managed functions,
Laurent Pinchart
[PATCH v2 0/4] sh73a0: Expose the PFC-controller SDHI power gate as a regulator,
Laurent Pinchart
[PATCH v2 00/11] Renesas TPU PWM support,
Laurent Pinchart
- [PATCH v2 11/11] leds: Remove leds-renesas-tpu driver,
Laurent Pinchart
- [PATCH v2 10/11] ARM: shmobile: sh73a0: Remove all GPIOs,
Laurent Pinchart
- [PATCH v2 09/11] sh-pfc: sh73a0: Remove function GPIOs,
Laurent Pinchart
- [PATCH v2 08/11] ARM: mach-shmobile: kota2: Use leds-pwm + pwm-rmob,
Laurent Pinchart
- [PATCH v2 07/11] ARM: mach-shmobile: armadillo800eva: Add backlight support,
Laurent Pinchart
- [PATCH v2 05/11] ARM: mach-shmobile: clock-r8a7740: add TPU PWM support,
Laurent Pinchart
- [PATCH v2 06/11] ARM: mach-shmobile: clock-r8a7790: add TPU PWM support,
Laurent Pinchart
- [PATCH v2 04/11] pwm: Add Renesas TPU PWM driver,
Laurent Pinchart
- [PATCH v2 03/11] sh-pfc: r8a7790: Add TPU pin groups and functions,
Laurent Pinchart
- [PATCH v2 01/11] sh-pfc: sh73a0: Add TPU pin groups and functions,
Laurent Pinchart
- [PATCH v2 02/11] sh-pfc: r8a7740: Add TPU pin groups and functions,
Laurent Pinchart
- [PULL] Renesas TPU PWM support,
Laurent Pinchart
[PATCH v2] mmc: tmio: reset the controller after power-up,
Guennadi Liakhovetski
[PATCH 0/9] TPU PWM support,
Laurent Pinchart
- [PATCH 9/9] leds: Remove leds-renesas-tpu driver,
Laurent Pinchart
- [PATCH 8/9] ARM: shmobile: sh73a0: Remove all GPIOs,
Laurent Pinchart
- [PATCH 7/9] sh-pfc: sh73a0: Remove function GPIOs,
Laurent Pinchart
- [PATCH 6/9] ARM: mach-shmobile: kota2: Use leds-pwm + pwm-rmob,
Laurent Pinchart
- [PATCH 4/9] ARM: mach-shmobile: clock-r8a7740: add TPU PWM support,
Laurent Pinchart
- [PATCH 5/9] ARM: mach-shmobile: armadillo800eva: Add backlight support,
Laurent Pinchart
- [PATCH 3/9] pwm: Add Renesas Mobile TPU PWM driver,
Laurent Pinchart
- [PATCH 1/9] sh-pfc: sh73a0: Add TPU pin groups and functions,
Laurent Pinchart
- [PATCH 2/9] sh-pfc: r8a7740: Add TPU pin groups and functions,
Laurent Pinchart
- Re: [PATCH 0/9] TPU PWM support,
Simon Horman
[PATCH] sh-pfc: r8a7740: Add bias (pull-up/down) pinconf support,
Laurent Pinchart
[PATCH 0/2] Add Ether pin groups for R8A777[89],
Sergei Shtylyov
[PATCH v3 0/5] OKI ML86V7667 driver and R8A7778/BOCK-W VIN support,
Sergei Shtylyov
[PATCH v3 0/4] R-Car VIN driver with R8A7779/Marzen support,
Sergei Shtylyov
[PATCH v3 0/1] Add I2C support to R8A7778/BOCK-W,
Sergei Shtylyov
[PATCH v5 0/3] Add USB support to R8A7778/BOCK-W,
Sergei Shtylyov
[PATCH v6 0/9] Reorganize R8A7779/Marzen USB code,
Sergei Shtylyov
[PATCH v2] sh-pfc: r8a7778: Fix outdated GPIO_FN comments,
Laurent Pinchart
[PATCH v8 2/2] sudmac: add support for SUDMAC,
Shimoda, Yoshihiro
[PATCH v8 1/2] dma: sh: add Kconfig,
Shimoda, Yoshihiro
[PATCH 0/3] Fix some bugs in the sh_veu driver,
Katsuya Matsubara
[PATCH v2] MMC: tmio: fix unbalanced power-on calls with clock-gating enabled,
Guennadi Liakhovetski
[PATCH] ARM: shmobile: sh73a0: Use DEFINE_RES_MEM*() everywhere,
Simon Horman
[PATCH 0/4] sh73a0: Expose the PFC-controller SDHI power gate as a regulator,
Laurent Pinchart
[PATCH 00/35] Fully migrate sh7372 to pinctrl,
Laurent Pinchart
- [PATCH 01/35] sh-pfc: sh7372: Add BSC pin groups and functions,
Laurent Pinchart
- [PATCH 02/35] sh-pfc: sh7372: Add CEU pin groups and functions,
Laurent Pinchart
- [PATCH 03/35] sh-pfc: sh7372: Add FLCTL pin groups and functions,
Laurent Pinchart
- [PATCH 04/35] sh-pfc: sh7372: Add FSI pin groups and functions,
Laurent Pinchart
- [PATCH 05/35] sh-pfc: sh7372: Add HDMI pin groups and functions,
Laurent Pinchart
- [PATCH 06/35] sh-pfc: sh7372: Add INTC pin groups and functions,
Laurent Pinchart
- [PATCH 07/35] sh-pfc: sh7372: Add KEYSC pin groups and functions,
Laurent Pinchart
- [PATCH 08/35] sh-pfc: sh7372: Add LCDC pin groups and functions,
Laurent Pinchart
- [PATCH 09/35] sh-pfc: sh7372: Add SCIF pin groups and functions,
Laurent Pinchart
- [PATCH 11/35] ARM: shmobile: mackerel: Register pinctrl mapping for the ADXL34X,
Laurent Pinchart
- [PATCH 10/35] sh-pfc: sh7372: Add USB pin groups and functions,
Laurent Pinchart
- [PATCH 12/35] ARM: shmobile: mackerel: Register pinctrl mapping for CEU,
Laurent Pinchart
- [PATCH 13/35] ARM: shmobile: mackerel: Register pinctrl mapping for FLCTL,
Laurent Pinchart
- [PATCH 14/35] ARM: shmobile: mackerel: Register pinctrl mapping for FSI,
Laurent Pinchart
- [PATCH 15/35] ARM: shmobile: mackerel: Register pinctrl mapping for HDMI,
Laurent Pinchart
- [PATCH 16/35] ARM: shmobile: mackerel: Register pinctrl mapping for LCD,
Laurent Pinchart
- [PATCH 17/35] ARM: shmobile: mackerel: Register pinctrl mapping for SCIF,
Laurent Pinchart
- [PATCH 18/35] ARM: shmobile: mackerel: Register IRQ pinctrl mapping for SDHI0,
Laurent Pinchart
- [PATCH 19/35] ARM: shmobile: mackerel: Register pinctrl mapping for SMSC911x,
Laurent Pinchart
- [PATCH 20/35] ARM: shmobile: mackerel: Register pinctrl mapping for ST1232,
Laurent Pinchart
- [PATCH 21/35] ARM: shmobile: mackerel: Register pinctrl mapping for TCA6416,
Laurent Pinchart
- [PATCH 22/35] ARM: shmobile: mackerel: Register pinctrl mapping for USBHS,
Laurent Pinchart
- [PATCH 23/35] ARM: shmobile: ap4evb: Register pinctrl mapping for CEU,
Laurent Pinchart
- [PATCH 24/35] ARM: shmobile: ap4evb: Register pinctrl mapping for FSI,
Laurent Pinchart
- [PATCH 25/35] ARM: shmobile: ap4evb: Register pinctrl mapping for HDMI,
Laurent Pinchart
- [PATCH 26/35] ARM: shmobile: ap4evb: Register pinctrl mapping for KEYSC,
Laurent Pinchart
- [PATCH 27/35] ARM: shmobile: ap4evb: Register pinctrl mapping for LCD,
Laurent Pinchart
- [PATCH 28/35] ARM: shmobile: ap4evb: Register pinctrl mapping for SCIF,
Laurent Pinchart
- [PATCH 29/35] ARM: shmobile: ap4evb: Register pinctrl mapping for SMSC911x,
Laurent Pinchart
- [PATCH 30/35] ARM: shmobile: ap4evb: Simplify tsc2007 pen state read function,
Laurent Pinchart
- [PATCH 31/35] ARM: shmobile: ap4evb: Register pinctrl mapping for TSC2007,
Laurent Pinchart
- [PATCH 32/35] ARM: shmobile: ap4evb: Register pinctrl mapping for USBHS,
Laurent Pinchart
- [PATCH 33/35] sh-pfc: sh7372: Replace GPIO_PORTx enum with GPIO port numbers,
Laurent Pinchart
- [PATCH 34/35] sh-pfc: sh7372: Remove function GPIOs,
Laurent Pinchart
- [PATCH 35/35] ARM: shmobile: sh7372: Remove all GPIOs,
Laurent Pinchart
- Re: [PATCH 00/35] Fully migrate sh7372 to pinctrl,
Simon Horman
[PATCH 00/37] Fully migrate r8a7740 to pinctrl,
Laurent Pinchart
- [PATCH 01/37] sh-pfc: r8a7740: Add SCIF pin groups and functions,
Laurent Pinchart
- [PATCH 02/37] sh-pfc: r8a7740: Declare missing INTC function,
Laurent Pinchart
- [PATCH 03/37] sh-pfc: r8a7740: Add BSC pin groups and functions,
Laurent Pinchart
- [PATCH 04/37] sh-pfc: r8a7740: Add GETHER pin groups and functions,
Laurent Pinchart
- [PATCH 05/37] sh-pfc: r8a7740: Add CEU pin groups and functions,
Laurent Pinchart
- [PATCH 06/37] sh-pfc: r8a7740: Add FSI pin groups and functions,
Laurent Pinchart
- [PATCH 07/37] sh-pfc: r8a7740: Add HDMI pin groups and functions,
Laurent Pinchart
- [PATCH 08/37] sh-pfc: r8a7740: Hardcode the LCDC0 output,
Laurent Pinchart
- [PATCH 09/37] ARM: shmobile: armadillo800eva: Register pinctrl mapping for INTC,
Laurent Pinchart
- [PATCH 10/37] ARM: shmobile: armadillo800eva: Register pinctrl mapping for GETHER,
Laurent Pinchart
- [PATCH 11/37] ARM: shmobile: armadillo800eva: Register pinctrl mapping for CEU0,
Laurent Pinchart
- [PATCH 12/37] ARM: shmobile: armadillo800eva: Register pinctrl mapping for FSI,
Laurent Pinchart
- [PATCH 13/37] ARM: shmobile: armadillo800eva: Register pinctrl mapping for HDMI,
Laurent Pinchart
- [PATCH 14/37] ARM: shmobile: armadillo800eva: Don't configure LCDC routing manually,
Laurent Pinchart
- [PATCH 15/37] ARM: shmobile: armadillo800eva: Replace GPIO_PORTx with GPIO port numbers,
Laurent Pinchart
- [PATCH 16/37] ARM: shmobile: bonito: Remove empty core devices array,
Laurent Pinchart
- [PATCH 17/37] ARM: shmobile: bonito: Register pinctrl mapping for SCIF,
Laurent Pinchart
- [PATCH 18/37] ARM: shmobile: bonito: Register pinctrl mapping for INTC,
Laurent Pinchart
- [PATCH 19/37] ARM: shmobile: bonito: Register pinctrl mapping for BSC,
Laurent Pinchart
- [PATCH 20/37] ARM: shmobile: bonito: Don't configure LCDC routing manually,
Laurent Pinchart
- [PATCH 21/37] sh-pfc: r8a7740: Remove SCIF function GPIOS,
Laurent Pinchart
- [PATCH 22/37] sh-pfc: r8a7740: Remove INTC function GPIOS,
Laurent Pinchart
- [PATCH 23/37] sh-pfc: r8a7740: Remove BSC function GPIOS,
Laurent Pinchart
[Linux USB Devel]
[Video for Linux]
[Site Home]
[Free Online Dating]
[Linux SCSI]
[Scanners]
[Yosemite Forum]
