Re: [PATCH 0/4] pch_uart: Cleanups, board quirks, and user uartclk parameter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 02/21/2012 07:10 PM, Tomoya MORINAGA wrote:
> 2012年2月22日10:59 Darren Hart <dvhart@xxxxxxxxxxxxxxx>:
>> This series does some minor clean-up to the pch_uart driver, adds support
>> for the Fish River Island II UART clock, and introduces a user_uartclk
>> parameter to aid in developing for early and changing hardware.
>>
>> Note that this series is my proposed alternative solution to that provided
>> by Tomoya MORNIAGA and Feng Tang which drops the board quirks and opts to
>> assume a 192 MHz clock on all boards. The problem with this approach is
>> that the CLKCFG register may have been set to something other than the
>> 192MHz configuration by the firmware. If so, then the pch_uart will send
>> garbage between the time the boot console is disabled and the pch_phub
>> sets the CLKCFG register again. In my case, the pch_phub PCI probe occurs
>> after the pch_uart_console_setup. Even if it happened before, the output
>> up until the PCI probing would be garbage.
>>
>> In order to support an early serial console, we cannot rely on the pch_phub
>> probe function to setup the CFGCLK register. This series relies on the board
>> quirks and doesn't force the setting of the CLKREG in the pch_phub code.
>> Instead, it aligns with what is the default configuration (defined by firmware)
>> for a given board. The user_uartclk provides a mechanism to force a specific
>> uartclk if necessary.
> 
> I think UART console function(including "early serial console") is
> used for debug use.
> 
> So, if people who want to see the boot log correctly before pch_phub installed,
> the people have only to do configure uart_clock by themselves.
> 
> So, I think default uart_clock 192MHz setting is better than Darren's opinion.
> 
> Let me know your opinion.

This patch series allows for a functional early serial console as well
as using the UART after boot. It leaves the CM-iTC board alone. So this
seems to enable all use cases, while forcing 192MHz breaks the FRI2
early serial console. I don't see an advantage to that approach other
than the obviously simpler code (which is nice, but should not trump
functionality).

-- 
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux