[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 1/7 v2] dmaengine: add a simple dma library



On Tue, 2012-01-31 at 09:59 +0100, Guennadi Liakhovetski wrote:
> Hi Vinod
> 
> Thanks for your reply.
> 
> On Tue, 31 Jan 2012, Vinod Koul wrote:
> 
> > On Mon, 2012-01-30 at 10:34 +0100, Guennadi Liakhovetski wrote:
> > > > I don't still comprehend the need for a library on top of dmaengine
> > > > which gain is just a library between clients and dmacs. Surely we don't
> > > > want to write another abstraction on top of one provided?
> > > > 
> > > > If the question is to handle scatter-gather even if the hardware doesn't
> > > > have the capability, then why don't add that in dmaengine itself rather
> > > > than one more layer?
> > > 
> > > Well, yes, adding new abstraction layers is always a decision, that has to 
> > > be well justified. In this case it does at least make the life easier for 
> > > two sh-mobile drivers: shdma and the new SUDMAC driver.
> > > 
> > > However, I did name the library in a generic way without reference to sh, 
> > > assuming, that it might with time become useful for other architectures 
> > > too. The reasons why I prefered to keep it as an optional addition to 
> > > dmaengine core, instead of tightly integrating it with it are, that (1) I 
> > > did not want to add useless code to drivers, that do not need it, 
> > So are we sure that only sh-mobile drivers need this capablity?
> 
> If I was sure about that, I'd call the library shmobile-dma or something 
> similar:-)
> 
> > Btw does you hardware only support single transfers and no sg support,
> 
> Well, the controller does have some repeat- and reload-modes, but they are 
> currently not supported by the driver and from the documentation I cannot 
> easily understand, how useful those modes could be to implement SG.
> 
> > would this remain the same in future?
> 
> Who knows?...
> 
> > > (2) I am 
> > > not sure if and when this library will become useful for other drivers: 
> > > apart from sh I am only familiar with one more dmaengine driver: 
> > > ipu/ipu_idmac.c, and that one supports scatter-gather lists in a limited 
> > > way and has some further peculiarities, that would likely make it a bad 
> > > match for the simple DMA library,
> > typically the dmacs will support this in some form or other, so your
> > point is valid :)
> > >  (3) keeping it separate makes its 
> > > further development easier.
> > > 
> > > OTOH, I'm certainly fine with a tighter library integration with the 
> > > dmaengine core. I think, it still would be better to keep it in a separate 
> > > file and only build it if needed, right? This woult also simplify code 
> > > debugging and further development. I can remove the "simple" notation, 
> > > which does make it look like an additional abstraction layer, and replace 
> > > it with, say, sgsoft (scatter-gather software implementation)?
> > that would be more apt :)
> > >  A more 
> > > interesting question is what to do with struct dma_simple_dev, struct 
> > > dma_simple_chan, struct dma_simple_desc, that embed struct dma_device, 
> > > struct dma_chan and struct dma_async_tx_descriptor respectively. I don't 
> > > think we want to merge all the additions from those wrapping structs back 
> > > into their dmaengine counterparts?
> > Sure they should be kept separate. I like the wrapping, this keeps it
> > simple.
> > > 
> > > How would you like to do this? Don't you think, it would be good to allow 
> > > both: either implement a dmaengine driver directly, exactly as all drivers 
> > > are doing now, or use the additional helper library for suitable (simple) 
> > > hardware types? I see it similar to I2C, where you either implement an I2C 
> > > driver directly, or you use the bitbanging abstraction for simpler 
> > > hardware.
> > I think it would be good to have both, this can be used by folks who
> > don't have sg support available.
> 
> Ok, so, should I just rename the driver to sgsoft? Is this the only 
> change, that you'd like to see?
That would be one :)
Also, I would review the other patch patches by today/tomorrow, you can
add any changes in next version as well

-- 
~Vinod

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Photo]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Resources]


  Powered by Linux