[PATCH 10/21] [SCSI] nsp32: use mdelay instead of large udelay constants

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ARM cannot handle udelay for more than 2 miliseconds, so we
should use mdelay instead for those.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Cc: GOTO Masanori <gotom@xxxxxxxxxxxx>
Cc: YOKOTA Hiroshi <yokota@xxxxxxxxxxxxxxxxxxxxxxx>
Cc: "James E.J. Bottomley" <JBottomley@xxxxxxxxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx
---
 drivers/scsi/nsp32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 1e3879d..0665f9c 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -2899,7 +2899,7 @@ static void nsp32_do_bus_reset(nsp32_hw_data *data)
 	 * reset SCSI bus
 	 */
 	nsp32_write1(base, SCSI_BUS_CONTROL, BUSCTL_RST);
-	udelay(RESET_HOLD_TIME);
+	mdelay(RESET_HOLD_TIME / 1000);
 	nsp32_write1(base, SCSI_BUS_CONTROL, 0);
 	for(i = 0; i < 5; i++) {
 		intrdat = nsp32_read2(base, IRQ_STATUS); /* dummy read */
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux