- To: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
- Subject: Re: [PATCH v3 2/4] usb: storage: add support for write cache quirk on usb hdd
- From: Namjae Jeon <linkinjeon@xxxxxxxxx>
- Date: Sun, 10 Jun 2012 09:30:09 +0900
- Cc: James.Bottomley@xxxxxxxxxxxxxxxxxxxxx, gregkh@xxxxxxxxxxxxxxxxxxx, mdharm-usb@xxxxxxxxxxxxxxxxxx, stern@xxxxxxxxxxxxxxxxxxx, bvanassche@xxxxxxx, linux-usb@xxxxxxxxxxxxxxx, linux-scsi@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, Namjae Jeon <namjae.jeon@xxxxxxxxxxx>, Pankaj Kumar <pankaj.km@xxxxxxxxxxx>, Amit Sahrawat <a.sahrawat@xxxxxxxxxxx>
- In-reply-to: <4FD39904.2010808@mvista.com>
2012/6/10, Sergei Shtylyov <sshtylyov@xxxxxxxxxx>:
> Hello.
>
> On 06/09/2012 09:41 PM, Namjae Jeon wrote:
>
>> Add support for write cache quirk on usb hdd. scsi driver will be set to
>> wce
>> by detecting write cache quirk in quirk list when plugging usb hdd.
>
>> Signed-off-by: Namjae Jeon<namjae.jeon@xxxxxxxxxxx>
>> Signed-off-by: Pankaj Kumar<pankaj.km@xxxxxxxxxxx>
>> Signed-off-by: Amit Sahrawat<a.sahrawat@xxxxxxxxxxx>
>> ---
>> drivers/usb/storage/scsiglue.c | 5 +++++
>> drivers/usb/storage/usb.c | 5 ++++-
>> include/linux/usb_usual.h | 4 +++-
>> 3 files changed, 12 insertions(+), 2 deletions(-)
>
>> diff --git a/drivers/usb/storage/scsiglue.c
>> b/drivers/usb/storage/scsiglue.c
>> index a324a5d..fe42547 100644
>> --- a/drivers/usb/storage/scsiglue.c
>> +++ b/drivers/usb/storage/scsiglue.c
> [...]
>> @@ -529,6 +529,9 @@ static void adjust_quirks(struct us_data *us)
>> case 'o':
>> f |= US_FL_CAPACITY_OK;
>> break;
>> + case 'p':
>> + f |= US_FL_WRITE_CACHE;
>> + break;
>> case 'r':
>> f |= US_FL_IGNORE_RESIDUE;
>> break;
>
> You probably should unite this chunk with the documentation update
> patch.
Hi Sergei.
I tried to post documentation update patch(4/4) for this chunk.
Do I misunderstand ?
>
>> diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
>> index 17df360..96fc152 100644
>> --- a/include/linux/usb_usual.h
>> +++ b/include/linux/usb_usual.h
>> @@ -64,7 +64,9 @@
>> US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \
>> /* cannot handle READ_CAPACITY_16 */ \
>> US_FLAG(INITIAL_READ10, 0x00100000) \
>> - /* Initial READ(10) (and others) must be retried */
>> + /* Initial READ(10) (and others) must be retried */ \
>> + US_FLAG(WRITE_CACHE, 0x00200000) \
>
> You've been already told to keep '\' at the same level with the above
> '\'
> and you're continuing to ignore this.
Ah,,, okay, I will change this code.
Thanks for your review.
>
>> + /* Write Cache status is not available */
>>
>> #define US_FLAG(name, value) US_FL_##name = value ,
>> enum { US_DO_ALL_FLAGS };
>
> WBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
[SCSI Target Devel]
[Linux SCSI Target Infrastructure]
[Kernel Newbies]
[Share Photos]
[IDE]
[Security]
[Git]
[Netfilter]
[Bugtraq]
[Photos]
[Yosemite]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Linux ATA RAID]
[Linux IIO]
[Samba]
[Video 4 Linux]
[Device Mapper]
[Linux Resources]