RE: [PATCH RESEND 1/2] Drivers: scsi: storvsc: Set the scsi result correctly when SRB status is INVALID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



> -----Original Message-----
> From: KY Srinivasan
> Sent: Tuesday, March 20, 2012 10:42 AM
> To: 'James Bottomley'
> Cc: gregkh@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devel@xxxxxxxxxxxxxxxxxxxxxx; ohering@xxxxxxxx; hch@xxxxxxxxxxxxx; linux-
> scsi@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH RESEND 1/2] Drivers: scsi: storvsc: Set the scsi result correctly
> when SRB status is INVALID
> 
> 
> 
> > -----Original Message-----
> > From: James Bottomley [mailto:James.Bottomley@xxxxxxxxxxxxxxxxxxxxx]
> > Sent: Tuesday, March 20, 2012 4:52 AM
> > To: KY Srinivasan
> > Cc: gregkh@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > devel@xxxxxxxxxxxxxxxxxxxxxx; ohering@xxxxxxxx; hch@xxxxxxxxxxxxx; linux-
> > scsi@xxxxxxxxxxxxxxx
> > Subject: RE: [PATCH RESEND 1/2] Drivers: scsi: storvsc: Set the scsi result
> correctly
> > when SRB status is INVALID
> >
> > On Mon, 2012-03-19 at 22:52 +0000, KY Srinivasan wrote:
> > > > >  However, keep in mind
> > > > > that there is no current ETA on when Windows will ship with these
> changes
> > -
> > > > Windows 8
> > > > > may ship with code where they would return an invalid SRB status, but
> they
> > are
> > > > not
> > > > > setting the sense code, hence this patch. When the Window host does
> the
> > > > "right thing"
> > > > > I will clean this up, but I don't know when that will be.
> > > >
> > > > I thought you just said you'd only just asked them if they could
> > > > implemented it, in which case no version of windows currently ships with
> > > > this, correct?
> > >
> > > There are some private builds of windows 8 floating around with this change,
> > where
> > > they are returning ILLEGAL_REQUEST SRB status  without any sense data.
> >
> > Sure, but they're not shipped, right ... it's like the test builds we do
> > for large companies like IBM and HP to try out certain things before
> > deciding they don't work.
> 
> They are close to shipping and it is very difficult to get any changes in
> presently. Furthermore, this is only on windows8; none of the prior
> versions of windows servers of interest support this. I am starting an effort to
> get this change into prior windows servers. Once again, it is not clear when
> these changes will be pushed out.
> 
> 
> >
> > > > > More importantly, the second patch  in this series where I filter out
> > > > > the ATA_16 command
> > > > > on the guest is really important for us. Without that patch on a range
> > > > > on windows hosts
> > > > > including the current beta version of windows8 where the host is
> > > > > returning a generic
> > > > > error in response to ATA_16 command, we cannot boot many Linux
> > > > > distros. If you
> > > > > prefer, I can drop the first patch and re-submit the second patch for
> > > > > consideration now.
> > > >
> > > > I'm not sure about that either.  You presumably translate
> > > > SRB_STATUS_ERROR into DID_TARGET_FAILURE.  That should cause the
> > > > termination of the command with prejudice in exactly the same way as an
> > > > ILLEGAL_REQUEST sense code would (minus the useful error information),
> > > > so what's causing the boot failure?
> > >
> > > You are right, currently without a proper SRB code, I do a
> DID_TARGET_FAILURE
> > and
> > > this results in the device being offlined and if the device happens to be the
> root
> > device,
> > > we obviously cannot boot. I have seen this problem with sles11 sp2 on a win8
> > box.
> >
> > OK, so this may be the root cause of the problem.  DID_TARGET_FAILURE
> > returns FAILED from scsi_decide_disposition().  This wakes up the error
> > handler to retry the command and, since the command is never going to
> > work, this ends up offlining the device.  The same thing will happen for
> > every command with no recovery.
> >
> > The question now is, what else returns SRB_STATUS_ERROR?  If it's always
> > for stuff that's unretryable, then the DID_ error is wrong and you
> > should be returning DID_PASSTHROUGH with an error code and the problem
> > will be solved.  If we can get SRB_STATUS_ERROR on retryable commands,
> > then you discriminate at the point of failure, not at the point of input
> > and return DID_TARGET_FAILURE for the ones that should be retried and
> > DID_PASSTHROUGH + error for the ones that shouldn't.  This will ensure
> > the driver is completely backwards compatible and that it will work
> > if/when windows properly handles the commands.
> 
> James, unfortunately based on the current SRB codes I get back from the
> host, I don't know which commands that failed ought to be retried and which
> ones should not be; I simply get a single SRB error code for cases where the
> host filtered the unsupported commands as well as the case where the host
> supported the command and something failed in the command execution.
> If there is something I can try in this driver to fix this problem, I am more than
> happy to try it. If it involves getting changes into  the host (win8, win2k8 etc.),
> I am willing to start a conversation with the relevant teams, but I cannot
> obviously determine when such changes will ship. However, I do need
> solution for the problem now.
> 
> I appreciate your taking the time to help me gravitate towards the
> correct solution here. Given my constraints, let me know what is the
> best way forward here.

Ping.

Regards,

K. Y
��.n��������+%������w��{.n�����{������ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f



[SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [Share Photos]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Photos]     [Yosemite]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

Add to Google Powered by Linux