[Prev Page][Next Page]
- Re: [ PATCH 2/4 ] mpt fusion disable hard resets for 53C1030 based devices
- From: Bernd Schubert <bs@xxxxxxxxx>
- RE: [PATCH 4/4 ] Increase scsi timeouts
- From: "Prakash, Sathya" <Sathya.Prakash@xxxxxxx>
- RE: [ PATCH 2/4 ] mpt fusion disable hard resets for 53C1030 based devices
- From: "Prakash, Sathya" <Sathya.Prakash@xxxxxxx>
- new home: sg3_utils, smp_utils, sdparm, lsscsi and sg driver info
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- 2.6.27-rc8-git7: Reported regressions from 2.6.26
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [dm-devel] Re: [PATCH 1/1] scsi: export busy state via q->lld_busy_fn()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 2/2] scsi: export busy state via q->lld_busy_fn()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 1/2] scsi: refactor sdev/starget/shost busy checking
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 0/2] scsi: export busy state for request stacking drivers
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- RE: [dm-devel] failover does not work with rdac device handler
- From: "Moger, Babu" <Babu.Moger@xxxxxxx>
- Re: [dm-devel] failover does not work with rdac device handler
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
- [PATCH] scsi: sr.c use unaligned access helpers
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
- [dm-devel] failover does not work with rdac device handler
- From: "Moger, Babu" <Babu.Moger@xxxxxxx>
- Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [dm-devel] Re: [PATCH 1/1] scsi: export busy state via q->lld_busy_fn()
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH]aic7xxx: Take the LED out of diagnostic mode on PM resume, too.
- From: thomas schorpp <thomas.schorpp@xxxxxxxxxxxxxx>
- [PATCH] scsi: remove private implementation of get_unaligned_be32
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
- Re: [PATCH 1/1] scsi: export busy state via q->lld_busy_fn()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] scsi: export busy state via q->lld_busy_fn()
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [patch 10/17] scsi: gdth.c use unaligned access helpers
- From: "Harvey Harrison" <harvey.harrison@xxxxxxxxx>
- Re: [patch 10/17] scsi: gdth.c use unaligned access helpers
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Alternative TRIM proposal
- From: Matthew Wilcox <matthew@xxxxxx>
- [PATCH 8/8] dm-mpath: convert to request-based
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 7/8] dm core: reject I/O violating new queue limits
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 6/8] dm core: enable request-based dm
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 5/8] dm core: add core functions for request-based dm
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 4/8] dm core: add target interfaces for request-based dm
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 3/8] dm core: add kmem_cache for request-based dm
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 2/8] dm core: tidy local_init
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 1/8] dm core: remove unused DM_WQ_FLUSH_ALL
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 0/8] dm: request-based dm-multipath
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] BUG: nr_phys_segments cannot be less than nr_hw_segments
- From: Nikanth Karthikesan <knikanth@xxxxxxx>
- Re: [PATCH 1/5] virtio_blk: change to use __blk_end_request()
- From: Rusty Russell <rusty@xxxxxxxxxxxxxxx>
- RE: [Patch] scsi_dh_rdac.c: add Dell product information into rdacdevice handler
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- RE: Alternative TRIM proposal
- From: <Kevin_Marks@xxxxxxxx>
- Reorg of source lio-core-2.6.git/drivers/lio-core
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [Scst-devel] [ANNOUNCE]: ConfigFS enabled Generic Target Mode andiSCSI Target Stack on v2.6.27-rc7
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: Alternative TRIM proposal
- From: Gerry.Houlder@xxxxxxxxxxx
- RE: Alternative TRIM proposal
- From: <Kevin_Marks@xxxxxxxx>
- RE: [Patch] scsi_dh_rdac.c: add Dell product information into rdacdevice handler
- From: <Yanqing_Liu@xxxxxxxx>
- Re: [PATCH] BUG: nr_phys_segments cannot be less than nr_hw_segments
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: [PATCH] BUG: nr_phys_segments cannot be less than nr_hw_segments
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
- Re: [PATCH] BUG: nr_phys_segments cannot be less than nr_hw_segments
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: Block: Fix blk_start_queueing() so as not to process a stopped queue
- From: Elias Oltmanns <eo@xxxxxxxxxxxxxx>
- Re: [Patch] scsi_dh_rdac.c: add Dell product information into rdac device handler
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Alternative TRIM proposal
- From: Matthew Wilcox <matthew@xxxxxx>
- [Patch] scsi_dh_rdac.c: add Dell product information into rdac device handler
- From: <Yanqing_Liu@xxxxxxxx>
- Re: [PATCH] BUG: nr_phys_segments cannot be less than nr_hw_segments
- From: Nikanth Karthikesan <knikanth@xxxxxxx>
- Re: [PATCH] BUG: nr_phys_segments cannot be less than nr_hw_segments
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH] BUG: nr_phys_segments cannot be less than nr_hw_segments
- From: Nikanth Karthikesan <knikanth@xxxxxxx>
- Re: [PATCH] scsi: Disable advansys on ARM and MIPS
- From: Matthew Wilcox <matthew@xxxxxx>
- Re: mac scsi, ncr5380
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- [PATCH] [20/21] SCSI-ISA-DMA: Finally kill unchecked_isa_dma
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [21/21] SCSI-ISA-DMA: Convert DMA buffers in ch.c to allocate via the block layer
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [19/21] SCSI-ISA-DMA: Switch to a single SCSI command pool
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [18/21] SCSI-ISA-DMA: Remove unchecked_isa_dma from sysfs
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [17/21] SCSI-ISA-DMA: Remove GFP_DMA use in sr.c
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [16/21] SCSI-ISA-DMA: Remove automatic block layer bouncing for unchecked_isa_dma
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [15/21] SCSI-ISA-DMA: Don't disable direct_io for unchecked_isa_dma in st.c
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [13/21] SCSI-ISA-DMA: Use blk_q_mask/get_pages_mask in sg driver
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [14/21] SCSI-ISA-DMA: Rely on block layer bouncing for ISA DMA devices scanning
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [12/21] SCSI-ISA-DMA: Remove unchecked_isa_dma support for hostdata
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [11/21] SCSI-ISA-DMA: Remove GFP_DMA uses in st/osst
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [10/21] SCSI-ISA-DMA: Remove unchecked_isa_dma in aha152x/wd7000/sym53c416/u14-34f/NCR53c406a
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [9/21] SCSI-ISA-DMA: Remove unchecked_isa_dma in aha1542
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [8/21] SCSI-ISA-DMA: Remove unchecked_isa_dma in eata.c
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [7/21] SCSI-ISA-DMA: Remove unchecked_isa_dma in gdth
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [6/21] SCSI-ISA-DMA: Remove unchecked_isa_dma in advansys.c
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [5/21] SCSI-ISA-DMA: Remove unchecked_isa in BusLogic
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [4/21] SCSI-ISA-DMA: Add sense_buffer_isa to host template
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [3/21] SCSI-ISA-DMA: Pass gfp to scsi_allocate_command
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [2/21] SCSI-ISA-DMA: Add blk_q_mask
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [1/21] SCSI-ISA-DMA: Add the alloc/get_pages_mask calls
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- [PATCH] [0/21] Remove SCSI unchecked_isa_dma try 3
- From: Andi Kleen <andi@xxxxxxxxxxxxxx>
- Re: [PATCH] scsi: Disable advansys on ARM and MIPS
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [dm-devel] failover does not work with rdac device handler
- From: "Moger, Babu" <Babu.Moger@xxxxxxx>
- [RFC] Rearrange code in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] scsi: export busy state via q->lld_busy_fn()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [PATCH 1/1] block: add lld busy state exporting interface
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
- Re: [PATCH 0/5] block: remove end_{queued|dequeued}_request()
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- [PATCH 5/5] block: remove end_{queued|dequeued}_request()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
- [PATCH 4/5] block: change elevator to use __blk_end_request()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 3/5] gdrom: change to use __blk_end_request()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 2/5] memstick: change to use __blk_end_request()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 0/5] block: remove end_{queued|dequeued}_request()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 1/5] virtio_blk: change to use __blk_end_request()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [dm-devel] Patch: add Dell product information into rdac device handler
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [patch 13/13] zfcp: fix double dbf id usage
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 00/13] zfcp updates for 2.6.28
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 12/13] zfcp: wait on SCSI work to be finished before proceeding with init dev
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 04/13] zfcp: attach and release SAN nameserver port on demand
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 09/13] zfcp: deadlock via shared work queue tasks
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 11/13] zfcp: fix erp list usage without using locks
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 06/13] zfcp: Simplify get_adapter_by_busid
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 05/13] zfcp: remove all typedefs and replace them with standards
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 08/13] zfcp: put threshold data in hba trace
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 10/13] zfcp: prevent fc_remote_port_delete calls for unregistered rport
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 07/13] zfcp: Simplify zfcp data structures
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 03/13] zfcp: remove unused references, declarations and flags
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 02/13] zfcp: Update message with input from review
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- [patch 01/13] zfcp: add queue_full sysfs attribute
- From: Christof Schmitt <christof.schmitt@xxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- sd: Make revalidate less chatty
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- [PATCH] sd: Switch kernel printing level for DIF messages
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] SCSI: don't do bogus retries
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: "Monty Montgomery" <monty@xxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: Patch: add Dell product information into rdac device handler
- From: Chandra Seetharaman <sekharan@xxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Matthew Wilcox <matthew@xxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Matthew Wilcox <matthew@xxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: "Monty Montgomery" <monty@xxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] scsi: Disable advansys on ARM and MIPS
- From: Matthew Wilcox <matthew@xxxxxx>
- Re: [PATCH] SCSI: don't do bogus retries
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: "Monty Montgomery" <monty@xxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
- Re: [PATCH] SCSI: don't do bogus retries
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] SCSI: don't do bogus retries
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] SCSI: don't do bogus retries
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: "Monty Montgomery" <monty@xxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: "Monty Montgomery" <monty@xxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
- Re: [PATCH] scsi: Disable advansys on ARM and MIPS
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- Does the LSI 1068 work
- From: "terrence blowfan" <tblowfan@xxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: "Monty Montgomery" <monty@xxxxxxxx>
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [PATCH] scsi: Fix bad use of udelay in atp870u.c
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: [PATCH] scsi: Disable advansys on ARM and MIPS
- From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
- [PATCH] scsi: Disable advansys on ARM and MIPS
- From: Martin Michlmayr <tbm@xxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Brad Boyer <flar@xxxxxxxxxxxxx>
- Re: [patch 09/17] ipr: use memory_read_from_buffer()
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [patch 02/17] aic7xxx: update .reg files
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: How many retries to allow?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/3] SCSI: eliminate scsi_end_request
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH] SCSI: don't do bogus retries
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] SCSI: rearrange code in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 0/3] SCSI: eliminate scsi_end_request()
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Riccardo <riccardo@xxxxxxxxx>
- [ANNOUNCE]: ConfigFS enabled Generic Target Mode and iSCSI Target Stack on v2.6.27-rc7
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- [PATCH 1/1] block: add lld busy state exporting interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [GIT PATCH] SCSI bug fixes for 2.6.27-rc6
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: David Miller <davem@xxxxxxxxxxxxx>
- Oops/Warning report for the week of September 28th, 2008
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Brad Boyer <flar@xxxxxxxxxxxxx>
- Re: How many retries to allow?
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: How many retries to allow?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- Re: How many retries to allow?
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Brad Boyer <flar@xxxxxxxxxxxxx>
- Re: 2.6.27-rc7-git5: Reported regressions from 2.6.26
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: 2.6.27-rc7-git5: Reported regressions from 2.6.26
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- 2.6.27-rc7-git5: Reported regressions from 2.6.26
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- Re: mac scsi, ncr5380
- From: Michael Schmitz <schmitz@xxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH git latest] drivers/scsi: fixing wrong comment before new_buffer_tape()
- From: Kai Makisara <Kai.Makisara@xxxxxxxxxxx>
- Re: [PATCH git latest] drivers/scsi: fixing wrong comment before new_buffer_tape()
- From: Lin Tan <tammy000@xxxxxxxxx>
- Re: [PATCH git latest] drivers/scsi: fixing wrong comment before new_buffer_tape()
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- Re: [PATCH git latest] drivers/scsi: fixing wrong comment before new_buffer_tape()
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH git latest] drivers/scsi: fixing wrong comment before new_buffer_tape()
- From: Tammy <tammy000@xxxxxxxxx>
- RE: [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [linux-m68k] mac scsi, ncr5380
- From: Sam Creasey <sammy@xxxxxxxxx>
- INQUIRY timeout value
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH 1/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Matthew Wilcox <matthew@xxxxxx>
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: James Smart <James.Smart@xxxxxxxxxx>
- Re: [PATCH git latest] drivers/scsi: fixing wrong comment before new_buffer_tape()
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- mac scsi, ncr5380
- From: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] scsi : set target can_queue from devinfo flags
- From: Hannes Reinecke <hare@xxxxxxxxxx>
- Re: [PATCH 1/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Rolf Eike Beer <eike-kernel@xxxxxxxxx>
- RE: [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- RE: [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- Re: [PATCH 1/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: Greg KH <greg@xxxxxxxxx>
- RE: [PATCH 6/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- RE: [PATCH 1/6] bfa: Brocade BFA FC SCSI driver submission (2ndtry)
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- Re: [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 6/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 1/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 6/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Jing Huang <huangj@xxxxxxxxxxx>
- [PATCH 5/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Jing Huang <huangj@xxxxxxxxxxx>
- [PATCH 4/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Jing Huang <huangj@xxxxxxxxxxx>
- [PATCH 3/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Jing Huang <huangj@xxxxxxxxxxx>
- [PATCH 2/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Jing Huang <huangj@xxxxxxxxxxx>
- [PATCH 1/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Jing Huang <huangj@xxxxxxxxxxx>
- [PATCH 0/6] bfa: Brocade BFA FC SCSI driver submission (2nd try)
- From: Jing Huang <huangj@xxxxxxxxxxx>
- RE: in 2.6.23-rc3-git7 in do_cciss_intr
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
- Re: in 2.6.23-rc3-git7 in do_cciss_intr
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- Re: in 2.6.23-rc3-git7 in do_cciss_intr
- From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
- How many retries to allow?
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [Bug 7630] os_scsi_tapes_lock should not be acquired before calling new_tape_buffer
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] scsi : set target can_queue from devinfo flags
- From: James Smart <James.Smart@xxxxxxxxxx>
- [PATCH] sd: remove command-size switching code
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] scsi : set target can_queue from devinfo flags
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH] scsi : set target can_queue from devinfo flags
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- RE: [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- Re: lpfc warnings on sparc64
- From: James Smart <James.Smart@xxxxxxxxxx>
- [RFC PATCH 2/2] scsi: export busy state via q->lld_busy_fn()
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [RFC PATCH 1/2] block: add lld busy state exporting interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [RFC PATCH 0/2] Export lld busy state for request stacking drivers
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: lpfc warnings on sparc64
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11646] QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11646] New: QLA2xxx: Kernel deadlock on high load somewhere after 2.6.20
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] BUG: ll_merge_requests_fn() updates req->nr_phys_segments wrongly
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- [Bug 11645] qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11645] New: qla2xxx.ko can't load firmware binary code
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- lpfc warnings on sparc64
- From: Meelis Roos <mroos@xxxxxxxx>
- Re: [PATCH] BUG: ll_merge_requests_fn() updates req->nr_phys_segments wrongly
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- RE: [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- RE: [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- Re: [PATCH 5/6] bfa: Brocade BFA FC SCSI Driver submission
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 5/6] bfa: Brocade BFA FC SCSI Driver submission
- From: Greg KH <greg@xxxxxxxxx>
- Re: [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: Greg KH <greg@xxxxxxxxx>
- [PATCH 3/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- [PATCH 6/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- [PATCH 2/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- [PATCH 5/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- [PATCH 4/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- [PATCH 1/6] bfa: Brocade BFA FC SCSI Driver submission
- From: "Jing Huang" <huangj@xxxxxxxxxxx>
- Re: [PATCH] sd: Fix handling of NO_SENSE check condition
- From: James Wellnitz <Jamie.Wellnitz@xxxxxxxxxx>
- Re: [PATCH] scsi : set target can_queue from devinfo flags
- From: James Smart <James.Smart@xxxxxxxxxx>
- Re: [patch 15/17] drivers/scsi: Use DIV_ROUND_UP
- From: Matthew Wilcox <matthew@xxxxxx>
- Re: [patch 15/17] drivers/scsi: Use DIV_ROUND_UP
- From: Julia Lawall <julia@xxxxxxx>
- Re: [PATCH] scsi : set target can_queue from devinfo flags
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH] scsi : set target can_queue from devinfo flags
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- [Bug 7976] failure of MATSHITACD-R CW-7502 using ACARD AEC-671X PCI Ultra/W SCSI-2/3 Host Adapter
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 7726] New LSI MegaRAID driver fails when ACPI is not present
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: iscsi update for scsi-post
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- [PATCH 7/7] libiscsi: fix locking in iscsi_eh_device_reset
- From: michaelc@xxxxxxxxxxx
- [PATCH 6/7] libiscsi: check reason why we are stopping iscsi session to determine error value
- From: michaelc@xxxxxxxxxxx
- [PATCH 2/7] libiscsi: Support drivers initiating session removal
- From: michaelc@xxxxxxxxxxx
- [PATCH 4/7] libiscsi: rename host reset to target reset
- From: michaelc@xxxxxxxxxxx
- [PATCH 5/7] iscsi_tcp: return a descriptive error value during connection errors
- From: michaelc@xxxxxxxxxxx
- [PATCH 3/7] iscsi class: fix endpoint id handling
- From: michaelc@xxxxxxxxxxx
- [PATCH 1/7] libiscsi: fix data corruption when target has to resend data-in packets
- From: michaelc@xxxxxxxxxxx
- iscsi update for scsi-post
- From: michaelc@xxxxxxxxxxx
- Re: [PATCH 0/6] detect online disk resize
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
- [Bug 8579] 3w_9xxx: 32/64bit cleanness ?? : Mounting doesn't work on 3ware 9500S-4LP RAID-controller and RAID-10
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: qlogicpti driver hangs the machine
- From: Meelis Roos <mroos@xxxxx>
- Re: qlogicpti driver hangs the machine
- From: Meelis Roos <mroos@xxxxx>
- Re: qlogicpti driver hangs the machine
- From: Meelis Roos <mroos@xxxxx>
- Re: qlogicpti driver hangs the machine
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: Matthew Wilcox <matthew@xxxxxx>
- Re: qlogicpti driver hangs the machine
- From: David Miller <davem@xxxxxxxxxxxxx>
- Re: qlogicpti driver hangs the machine
- From: Meelis Roos <mroos@xxxxxxxx>
- [PATCH 2/2] scsi: annotate gdth_rdcap_data, gdth_rdcap16_data endianness
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
- [PATCH 1/2] scsi: gdth.c use unaligned access helpers
- From: Harvey Harrison <harvey.harrison@xxxxxxxxx>
- [PATCH] scsi_error: Fix idempotent command handling
- From: michaelc@xxxxxxxxxxx
- [PATCH] BUG: ll_merge_requests_fn() updates req->nr_phys_segments wrongly
- From: Nikanth Karthikesan <knikanth@xxxxxxx>
- [Bug 8662] mptbase can report cryptic errors
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [patch 17/17] drivers/scsi/device_handler/scsi_dh_emc.c: suppress warning
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- [Bug 7630] os_scsi_tapes_lock should not be acquired before calling new_tape_buffer
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [PATCH] aic7xxx: user visible misuse wrong SI units (not disk size!)
- From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
- [Bug 9426] drivers/scsi/gdth.c and PCI ROMs
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 9426] drivers/scsi/gdth.c and PCI ROMs
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- RE: [PATCH 1/1] scsi_dh: add ALUA notification for EMC Clariion devices
- From: Levy_Jerome@xxxxxxx
- Re: qlogicpti driver hangs the machine
- From: Matthew Wilcox <matthew@xxxxxx>
- Re: [PATCH 1/1] scsi_dh: add ALUA notification for EMC Clariion devices
- From: Matthew Wilcox <matthew@xxxxxx>
- qlogicpti driver hangs the machine
- From: Meelis Roos <mroos@xxxxxxxx>
- [Bug 9426] drivers/scsi/gdth.c and PCI ROMs
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 9422] Direct manipulation of PCI ROM in drivers/scsi/qla2xxx/qla_init.c
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [patch 17/17] drivers/scsi/device_handler/scsi_dh_emc.c: suppress warning
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/1] scsi_dh: add ALUA notification for EMC Clariion devices
- From: Levy_Jerome@xxxxxxx
- Re: [ PATCH 2/4 ] mpt fusion disable hard resets for 53C1030 based devices
- From: Bernd Schubert <bs@xxxxxxxxx>
- [PATCH 4/4 ] Increase scsi timeouts
- From: Bernd Schubert <bs@xxxxxxxxx>
- [ PATCH 3/4 ] mpt fusion prevent DV deadlock
- From: Bernd Schubert <bs@xxxxxxxxx>
- [ PATCH 1/4 ] mpt fusion disable hard resets for 53C1030 based devices
- From: Bernd Schubert <bs@xxxxxxxxx>
- [ PATCH 1/4 ] mpt fusion SoftReset handler
- From: Bernd Schubert <bs@xxxxxxxxx>
- [PATCH 0/4 V2] mpt fusion error handler patches
- From: Bernd Schubert <bs@xxxxxxxxx>
- [Bug 5921] AIC7xxx: SCSI bus crash when formating CDRW
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [patch 10/17] scsi: gdth.c use unaligned access helpers
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [patch 15/17] drivers/scsi: Use DIV_ROUND_UP
- From: Matthew Wilcox <matthew@xxxxxx>
- [Bug 7130] loading driver eat all CPU and since some time may block all system disk IO (even can not reboot)
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 6722] second device open() (by periodic hal polling loop!) kills ongoing transfer (CD burner underruns, HDD hard resets)
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 5921] AIC7xxx: SCSI bus crash when formating CDRW
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11619] Hotplug doesn't work with SAS1064
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11619] Hotplug doesn't work with SAS1064
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [Bug 11619] New: Hotplug doesn't work with SAS1064
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- [patch 02/17] aic7xxx: update .reg files
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 05/17] scsi: replace __inline with inline
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 17/17] drivers/scsi/device_handler/scsi_dh_emc.c: suppress warning
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 01/17] aic7xxx: introduce "dont_generate_debug_code" keyword in aicasm parser
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 09/17] ipr: use memory_read_from_buffer()
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 12/17] scsi: remove the unused SCSI_QLOGIC_FC_FIRMWARE option
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 06/17] MPT: remove unused struct -- mpt_proc_entry_t
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 07/17] scsi: aic79xx_core fix shadowed variables, add statics
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 13/17] drivers/scsi/a2091.c: make 2 functions static
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 14/17] drivers/scsi/a3000.c: make 2 functions static
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 08/17] scsi: aic79xx aic79xx_pci.c fix shadowed variables
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 15/17] drivers/scsi: Use DIV_ROUND_UP
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 16/17] drivers/scsi/megaraid: Use DIV_ROUND_UP
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 10/17] scsi: gdth.c use unaligned access helpers
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 11/17] scsi: use the common hex_asc array rather than a private one
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 03/17] aic7xxx: update *_shipped files
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [patch 04/17] #if 0 ses_match_host()
- From: akpm@xxxxxxxxxxxxxxxxxxxx
- [Bug 9422] Direct manipulation of PCI ROM in drivers/scsi/qla2xxx/qla_init.c
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 7007] LSI CERC ATA/100 Controller not found anymore when using kernel > 2.6.12.6 with "MEGARAID_LEGACY"
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 9422] Direct manipulation of PCI ROM in drivers/scsi/qla2xxx/qla_init.c
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [PATCH 13/13] scsi: remove scsi_noretry_cmd
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 12/13] scsi: update scsi_log_completion disposition decoding
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 10/13] scsi: move device online check to scsi_attempt_requeue_command
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 11/13] scsi: remove scsi_device_online from scsi_decide_disposition
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 09/13] scsi: fix up SCSI_MLQUEUE defintions and add driver, device and transport ones
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 04/13] scsi: remove maybe_retry
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 08/13] scsi: convert other scsi_check_sense users to new error codes
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 07/13] scsi: have device handlers return SCSI_MLQUEUE error value
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 06/13] scsi: rename scsi_queue_insert to scsi_attempt_requeue_command
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 03/13] scsi: Move blk_noretry_request
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 05/13] scsi: change return codes in scsi_decide_disposition
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 02/13] scsi: Move retries check
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 01/13] scsi: Move wait_for check
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [PATCH 0/13] scsi: scsi_decide_disposition update
- From: Mike Anderson <andmike@xxxxxxxxxxxxxxxxxx>
- [Bug 8004] a likely bug in "scsi/arm/cumana_2.c"
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 8004] a likely bug in "scsi/arm/cumana_2.c"
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11619] New: Hotplug doesn't work with SAS1064
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [PATCH 1/2] lld busy status exporting interface
- From: "Jun'ichi Nomura (NEC)" <j-nomura@xxxxxxxxxxxxx>
- Re: 2.6.27-rc6-git6: Reported regressions from 2.6.26
- From: Alexey Starikovskiy <aystarik@xxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- 2.6.27-rc6-git6: Reported regressions from 2.6.26
- From: "Rafael J. Wysocki" <rjw@xxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] lld busy status exporting interface
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] lld busy status exporting interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 3 of 3] sd: Correctly handle all combinations of DIF and DIX
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- [PATCH 0 of 3] DIF fixes
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- [PATCH 2 of 3] sd: Always print actual protection_type
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- [PATCH 1 of 3] sd: Issue correct protection operation
- From: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
- Re: [PATCH 1/2] lld busy status exporting interface
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- FW: E200i controllers on BL465C Blades - kernel fails to boot
- From: "Miller, Mike (OS Dev)" <Mike.Miller@xxxxxx>
- Re: Kernel Level Generic Target Mode control path
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
- Re: Kernel Level Generic Target Mode control path
- From: Vladislav Bolkhovitin <vst@xxxxxxxx>
- Re: [dm-devel] [PATCH 2/2] scsi: exports busy status via bdi_lld_congested
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [dm-devel] [PATCH 2/2] scsi: exports busy status via bdi_lld_congested
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] scsi: exports busy status via bdi_lld_congested
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 1/2] lld busy status exporting interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 0/2] Add lld-congestion bit for backing_dev_info
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [PATCH] Fix handling of failed requests in scsi_io_completion
- From: Antonio Ospite <ospite@xxxxxxxxxxxxxxxxx>
- Re: [Bug 11589] New: Mass-storage USB Device does not show up when CONFIG_SCSI_MULTI_LUN is set
- From: Matthew Dharm <mdharm-scsi@xxxxxxxxxxxxxxxxxx>
- [Bug 11589] Mass-storage USB Device does not show up when CONFIG_SCSI_MULTI_LUN is set
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11589] Mass-storage USB Device does not show up when CONFIG_SCSI_MULTI_LUN is set
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [Bug 11589] New: Mass-storage USB Device does not show up when CONFIG_SCSI_MULTI_LUN is set
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- [Bug 11589] Mass-storage USB Device does not show up when CONFIG_SCSI_MULTI_LUN is set
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11589] Mass-storage USB Device does not show up when CONFIG_SCSI_MULTI_LUN is set
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- [Bug 11589] New: Mass-storage USB Device does not show up when CONFIG_SCSI_MULTI_LUN is set
- From: bugme-daemon@xxxxxxxxxxxxxxxxxxx
- Re: [PATCH 0/3] block changes for request-based dm-multipath
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: [PATCH] qla2xxx: fix printk format warnings
- From: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
- [PATCH 3/3] block: add a queue flag for request stacking support
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 2/3] block: add request submission interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 1/3] block: add request update interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [PATCH 0/3] block changes for request-based dm-multipath
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- [ANNAUNCE] OSC's OSD project hosted on open-osd.org
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Hotplug problems with SAS1064 LSI Controller
- From: Vlad Seliverstov <vseliverstov@xxxxxxxxxxxxxx>
- [PATCH] qla2xxx: fix printk format warnings
- From: Alexander Beregalov <a.beregalov@xxxxxxxxx>
- [BUG 2.6.26] iscsi: LRO plus iSCSI causes panic
- From: "Brandeburg, Jesse" <jesse.brandeburg@xxxxxxxxx>
- aacraid: Adaptec 2200S support broken on x86_64 by commit 94cf6ba11b068b8a8f68a1e88bffb6827e92124b
- From: "Hillier, Gernot" <gernot.hillier@xxxxxxxxxxx>
- Re: [regression] CD-DA delay needed after insertion (http://bugzilla.kernel.org/show_bug.cgi?id=10974)
- From: Geert Uytterhoeven <Geert.Uytterhoeven@xxxxxxxxxxx>
- Re: Warning/Oops report of the week of September 16th, 2008
- From: Jay Cliburn <jacliburn@xxxxxxxxxxxxx>
- aacraid down_interruptible check
- From: Daniel Walker <dwalker@xxxxxxxxxx>
- Re: [PATCH 02/13] block: add request submission interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [PATCH 02/13] block: add request submission interface
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Warning/Oops report of the week of September 16th, 2008
- From: Arjan van de Ven <arjan@xxxxxxxxxxxxx>
- Re: [PATCH 02/13] block: add request submission interface
- From: Kiyoshi Ueda <k-ueda@xxxxxxxxxxxxx>
- Re: [PATCH 0/2] FC pass through support via bsg interface
- From: Seokmann Ju <seokmann.ju@xxxxxxxxxx>
- Re: [Iscsitarget-devel] [PATCH] Allow more than 255 LUNs to be reported.
- From: Arne Redlich <agr@xxxxxxxxxxxxxx>
- Re: Block timeouts seem not to be working
- From: Mike Christie <michaelc@xxxxxxxxxxx>
- Re: [PATCH 0/2] FC pass through support via bsg interface
- From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
- Re: [PATCH 0/2] FC pass through support via bsg interface
- From: Seokmann Ju <seokmann.ju@xxxxxxxxxx>
- Re: [PATCH 00/13] request-based dm-multipath
- From: Jens Axboe <jens.axboe@xxxxxxxxxx>
- Re: [PATCH 02/13] block: add request submission interface
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: [PATCH 1/4] 24-bit types: typedef and functions for accessing 3-byte arrays as integers
- From: Boaz Harrosh <bharrosh@xxxxxxxxxxx>
- Re: ConfigFS + Target Mode Engine API discussion
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/4 2.6.28] cxgb3 - handle ARP replies for private iSCSI IP address
- From: Jeff Garzik <jgarzik@xxxxxxxxx>
- Re: ConfigFS + Target Mode Engine API discussion
- From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] mpt fusion error handler patches
- From: Bernd Schubert <bs@xxxxxxxxx>
- Re: [PATCH 4/5] fusion prevent DV deadlock
- From: Bernd Schubert <bs@xxxxxxxxx>
- Re: ConfigFS + Target Mode Engine API discussion
- From: Joel Becker <Joel.Becker@xxxxxxxxxx>
- Re: [PATCH 0/5] mpt fusion error handler